Linux Category - Page 206 of 605 - CNX Software

December 14, 2020 by Jean-Luc Aufranc (CNXSoft) - 16 Comments

Banana Pi BPI-M5 SBC with 4GB RAM, 16GB flash launched for $53

Last September, we wrote Banana Pi team was working on an Amlogic S905X3 SBC called BPI-M5 and very similar to Hardkernel ODROID-C4 board launched in April 2020. At the time, we noted the Banana Pi BPI-M5 did add a 16GB eMMC flash on-board by default, while ODROID-C4 requires booting from a MicroSD card or a separate eMMC flash module. We also pointed out software and community support is usually much better for the ODROID board, and it was brought to our attention that BPI-M5 board uses 5V voltage only via USB-C, while the Hardkernel board support a wider 5.5V to 17V via a power barrel jack, and this could lead to potential power issue for customer connecting drives to USB 3.0 ports. The good news is that you can now buy Banana Pi BPI-M5 SBC on Aliexpress for $53 plus shipping. Banana Pi BPI-M5 specifications haven’t changed, and we can […]

December 13, 2020December 13, 2020 by Jean-Luc Aufranc (CNXSoft) - 50 Comments

NanoPi R4S SBC preview with OpenWrt and Ubuntu Core

Rockchip RK3399 powered NanoPi R4S router SBC launched at the beginning of the month, and FriendlyELEC kindly sent a review sample to CNX Software. I intended to test thermally performance, Ethernet, and USB like I did for NanoPi R2S and NanoPi NEO3, but Armbian is not available right now, so I could not use some of the tools I normally used right now. So instead, I tested the board/gateway with the image from FriendlyELEC. First FriendlyCore based on Ubuntu Core 20.04, but there some issues which we’ll detail in this preview, so I then switch to FriendlyWrt built upon OpenWrt 19.07 which works better, but I still encountered some problems. That’s just to say it might be better to wait a little longer until Armbian images are released, or until FriendlyELEC fixes some of the shortcomings. NanoPi R4S gateway unboxing Before testing the software, let’s see what I’ve received. NanoPi […]

December 11, 2020 by Jean-Luc Aufranc (CNXSoft) - 7 Comments

Hackboard 2 Intel Celeron N4020 SBC comes with optional 4G/5G cellular modem (crowdfunding)

We’ve seen several x86 SBCs made for the makers’ community including AAEON Up Board family, AMD powered UDOO BOLT boards, and Seeed Studio Odyssey-X864105 SBC and mini PC. Hackboard 2 is another one of those single board computers. Powered by a dual-core Intel Celeron N4020 Gemini Lake Refresh processor coupled with 4GB DDR4 RAM and 64GB eMMC flash, the board offers the usual HDMI, Ethernet, USB ports, plus a 40-pin Raspberry Pi header, and an optional 4G or 5G modem. Hackboard 2 specifications: SoC – Intel Celeron N4020 dual-core Gemini Lake Refresh processor @ 1.1 GHz / 2.8 GHz (Turbo) with 4MB cache, Intel UHD graphics 600; 6W TDP System Memory – 4GB DDR4 RAM Storage – 64 GB onboard eMMC flash, 2x NVMe M.2 slots for up to 4 TB additional storage Video output HDMI 2.0a output up to 4K 30-pin eDP connector for 11.6″ to 15.6″ displays 6-pin […]

December 10, 2020December 10, 2020 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

RISC-V hardware & software ecosystem highlights in 2020

The RISC-V Summit 2020 is currently taking place virtually, and RISC-V International, a non-profit corporation aiming to drive the adoption and implementation of the RISC-V instruction set architecture (ISA), took the occasion to remind us of the growth of the ISA both in terms of commercial adaption, education, and other projects. Calista Redmond, CEO of RISC-V International, detailed the growth in memberships: This year, our technical community has grown 66 percent to more than 2,300 individuals in our more than 50 technical and special interest groups. We’re seeing increased market momentum of RISC-V cores, SoCs, developer boards, software and tools across computing from embedded to enterprise … We’re proud of our growing global membership, which has more than doubled in the last year to 1,000 total members, including 222 organizations.” RISC-V also launched the RISC-V Exchange now listing over 124 RISC-V cores, SoCs, and developer boards, as well as 129 […]

December 8, 2020December 8, 2020 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

Raspberry Pi 4 gets a 13MP 4K MIPI camera devkit for $99

The Raspberry Pi boards already have their official 4K MIPI camera with Raspberry Pi HQ camera based on a 12.3MP Sony sensor module that sells for $75 and up with a lens. But e-Con Systems still decided to launch their own 13MP 4K MIPI camera development kit for Raspberry Pi 4 which they currently sell for $99 plus shipping. At first, I dismissed the news, but let’s have a look if there may be some advantages in using that camera devkit. e-CAM130_CURB camera devkit specifications: e-CAM137A_CUMI1335_MOD 13.0 MP camera module with S-mount lens holder, ON Semiconductor AR1335 13MP 1/3.2″ CMOS image sensor Image Signal Processor (ISP) for auto functions such as auto white balance, auto exposure control as well as optional MJPEG compression. Resolutions and frame rates VGA (640 x 480) – 110 fps HD (1280 x 720) – 72 fps Full HD (1920 x 1080) – 60 fps 4K […]

December 7, 2020December 7, 2020 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Industio 7-inch smart display features SigmaStar SSD201 SoM, WiFi and Ethernet

We previously covered the $10 Industio IDO-SOM2D01 module based on SigmaStar SSD201 Cortex-A7 processor with 64MB RAM built-in, 128MB SPI NOR flash, and designed for full HD smart displays. Today I learned Industio was the design team of system-on-module for Wireless Tag, and the latter is the only distributor of Industio branded products. The company also informed us about Industio IDO-SBC2D70 7-inch smart display based on the aforementioned SSD201 or SSD202 module and connected over Ethernet or WiFi. Industio IDO-SBC2D70 smart display specifications: SoM – Industio IDO-SOM2D01 with SoC – SigmaStar SSD201/SSD202 dual-core Cortex-A7 processor @ 1.2 GHz with 2D GPU, 64MB DDR2 (SSD201) or 128MB DDR3 (SSD202) Storage – 128MB SPI NAND flash (option up to 512MB) Video Decoder – H.264/H.265 up to 1920×1080 @ 60 fps Dimensions – 2.95 x 2.95 cm Storge – MicroSD card socket (SDIO 2.0) Display – 1024 x 600 IPS RGB module by […]

December 7, 2020December 7, 2020 by Jean-Luc Aufranc (CNXSoft) - No Comments

AI Gateway combines Raspberry Pi Compute Module 4 with Google Coral Edge TPU

Techbase quickly unveiled an update to their Modberry industrial controllers with Modberry 500 CM4 DIN Rail computer as soon as Raspberry Pi Compute Module 4 was launched. The company has now introduced another Raspberry Pi CM4 based product with ModBerry AI GATEWAY 9500-CM4 gateway combining the Broadcom BCM2711C0 system-on-module to Google Edge TPU to cater to applications leveraging AI acceleration. ModBerry AI GATEWAY 9500-CM4 preliminary specifications: SoM – Raspberry Pi Compute Module 4 AI accelerator – Google Coral Edge TPU module with up to 4 TOPS connected over the RPi CM4’s PCIe interface Peripherals (customizable as needed) USB, HDMI, and Ethernet. Serial RS-232/485 ports Digital and analog I/Os with or without opto-isolation Relays, 1-Wire, CAN bus, M-Bus Master and Slave PCIe modules for wireless support Cellular – 4G/LTE and 5G modem, interchangeable with Coral TPU, plus on-board eSIM LPWAN – NB-IoT, LoRa, Sigfox, Wireless M-Bus ZigBee Additional Wi-Fi/Bluetooth interface or […]

December 7, 2020 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

DR6018-S is a more compact, cheaper WiFi 6 SBC with optional WiFi 6E

Earlier this year we wrote about Wallys Communications DR6018-V2 WiFi 6 embedded router board based on Qualcomm IPQ6010 processor with M.2 sockets for optional 5G and WiFi 6E cards. The company has now launched a more compact, and cheaper board with DR6018-S SBC based on the same processor with 802.11ax WiFi 6 and 802.11 b/g/n/ac WiFi 5 support, plus an M.2 socket for people wanting to add WiFi 6E cards. DR6018-S board specifications: SoC – Qualcomm Atheros IPQ6010 quad-core Arm Cortex-A53 processor @ 1.8 GHz System Memory – 1GB (2x 512MB) DDR3L 16-bit interface with 32-bit memory bus design Storage – 256MB NAND Flash, 32MB NOR flash, optional SD card slot Networking Wired – 2x Gigabit Ethernet port including one with PoE support Wireless WiFi 2×2 2.4GHz MU-MIMO OFDMA 802.11b/g/n/ax WiFi 6, max 23dBm per chain 2×2 5GHz MU-MIMO OFDMA 802.11a/n/ac/ax WiFi 6, max 20dBm per chain 4x u.FL connectors […]