Linux Category - Page 255 of 610 - CNX Software

September 26, 2019 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

UDOO X86 II SBC Combines Intel Braswell SoC with Microchip ATMega32U4 “Arduino” MCU

UDOO X86 development board was first introduced in a crowdfunding campaign in 2016 with a quad-core Intel Braswell processor coupled with an Arduino 101 compatible Intel Curie module for real-time I/O processing. Early July of next year (2019) the Intel processor and module seems to be going so well and have a bright future together with UDOO X86 board and accessories becoming broadly available. But life can be cruel at times, and Intel announced their plan to discontinue Intel Curie and other IoT projects just a few weeks later with the last shipment scheduled for July 2018. SECO, the company behind UDOO, could only order so much stock of Intel Curie module, so they had to design an alternative, and here we are with UDOO X86 II SBC offering many of the same features but replacing Intel Curie module by a Microchip ATmega32U4 MCU compatible with Arduino Leonardo. Two […]

September 25, 2019 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Geniatech SOM3399 RK3399 SoM Complies with 96Boards System-on-Module Specification

96boards System-on-Module specification was introduced last April together with their first SOM-CA (2x board-to-board connectors) and SOM-CB (4x board-to-board connectors), namely TB-96AI & TB-96AIoT modules powered by respectively AI capable Rockchip RK1808 and RK3399Pro processors that would fit into a compatible baseboard. Those started to ship early this summer, and there’s now a new module that complies with 96Boards SoM specification courtesy of Geniatech SOM3399 powered by a Rockchip RK3399 hexa-core processor without the extra NPU / AI accelerator found in the aforementioned modules. Geniatech SOM3399 Specifications: SoC – Rockchip RK3399 dual-core Cortex-A72 up to 1.8GHz, quad-core Cortex-A53 up to 1.4GHz, Mali-T860 MP4 GPU with support for OpenGL ES1.1/2.0/3.0, OpenCL1.2, DirectX11.1 System Memory – 2GB LPDDR4 (4GB as option) Storage – 8GB eMMC flash (16, 32, and 64GB as option) Board-to-board connector – 4x 100-pin high-speed connectors (X1, X2, X3, and X4 as defined by the spec) with USB 3.0, […]

September 24, 2019September 24, 2019 by Jean-Luc Aufranc (CNXSoft) - No Comments

AAEON BOXER-8310AI Rugged Fanless Mini PC Combines Apollo Lake Processor & Myriad X VPU for AI Edge Applications

We’ve covered several of AAEON rugged mini PCs part of BOXER-8100 family powered by an NVIDIA Tegra X2 processor and targetting AI Edge applications. The company has now introduced three new AI embedded computers for the same AI edge applications but using Intel processors together with Intel/Movidius Myriad X VPU (Vision Processing Unit) for AI acceleration. The three models are BOXER-8310AI, BOXER-8320AI, and the upcoming BOXER-8330AI based on respectively Intel Celeron/Pentium Apollo Lake processor, Intel Core i3 7th gen processor, and an Intel Core i3/77 or Xeon processor. I’ll focus on the Apollo Lake model in this post to introduce AAEON BOXER-8300AI family of rugged mini PCs. BOXER-8310AI specifications: SoC (one or the other) Intel Pentium N4200 quad-core Apollo Lake processor Intel® Celeron N3350 dual-core Apollo Lake processor System Memory – 1x DDR3L SODIMM slot supporting up to 8GB RAM @ 1867 MHz Storage Device – mSATA socket AI Module […]

September 23, 2019 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

Piper Computer Kit 2 is a DIY Raspberry Pi 3 Computer for Kids’ Education

Kids can easily build theirs own computer and then learn more about electronics and programming thanks to Piper Computer Kit 2. The kit is based on Raspberry Pi 3 SBC, a 9″ display, a power bank, and all bits and pieces required for assembly. There’s also a 16GB microSD with the OS and the company’s PiperCode software to learn the basics of programming. The complete kit comes with the following items: SBC – Raspberry Pi 3 Model B Storage – 16GB MicroSD card Display – 9″ 1024 x 600 LCD display with HDMI cable Audio – Integrated speaker 25+ laser-etched wooden and acrylic pieces 50+ hardware pieces 20+ electronic components Battery – 7,800 mAh rechargeable battery/power bank Phillips-head screwdriver 8 square foot laminated blueprint USB Mouse This is whay it looks like after around two hours of assembly time. Kids can then start playing Raspberry Pi Edition Mineccraft and some […]

September 20, 2019September 21, 2019 by Jean-Luc Aufranc (CNXSoft) - 19 Comments

$118 BeagleBone-AI SBC is Made for AI Edge Applications

The BeagleBoard.org Foundation introduced BeagleBone-AI SBC at Embedded World 2019 last February. The board is specifically designed for artificial intelligence workloads at the edge thanks to Texas Instruments AM5729 dual-core Cortex-A15 processor that embeds a dual-core C66x DSP, and 4 EVE (Embedded Vision Engine) cores. The BeagleBone Black compatible board was not available at the time, but the Foundation has now formally launched the board, and you can buy BeagleBone-AI for $118 and up with heatsink and antenna on sites such as Mouser, OKdo, or Newark. BeagleBone-AI full specifications have now been published: SoC – TI Sitara AM5729 with Dual-core Cortex-A15 processor @ 1.5 GHz 2x dual-core PRUs 2x Cortex-M4 real-time cores dual core C66x VLIW DSP 4x EVEs 2.5MB of on-chip L3 RAM VA-HD subsystem with support for 4K at 15fps H.264 encode/decode and other codecs at 1080p60 Vivante GC320 2D graphics accelerator Dual-Core PowerVR SGX544 3D GPU System […]

September 20, 2019September 20, 2019 by Ayo Ayibiowu - 3 Comments

PiCAN3 Board for the Raspberry Pi 4 adds CAN Capabilities plus a Real-Time Clock

PiCAN3 CAN Bus Board for Raspberry Pi 4 with 3A SMPS And RTC

Copperhill Technologies has recently announced the release of its PiCAN3 CAN-Bus Board for the Raspberry Pi 4. The PiCAN3 adds Controller Area Network capabilities plus a real-time clock to the new Raspberry Pi SBC. The Controller Area Network (CAN Bus) is a robust and common industrial communication bus used mostly in the automotive industry. CAN supports long travel distance, medium communication speed, and quite reliable. One of the most significant advantage with CAN-BUS is that it connects any number of ECUs (or microcontrollers) in your car through the two-wire bus, CAN High and CAN Low, reducing the weight of wires that could be gained by using point-to-point communication between ECUs. CAN bus is one of five protocols used in the on-board diagnostics (c)-II vehicle diagnostics standard. Although it is popular in the automotive industry, the Raspberry Pi doesn’t provide an off the shelf support for working with CAN-BUS. Users interested in trying out […]

September 19, 2019September 18, 2019 by Ayo Ayibiowu - No Comments

Camect is an Artificial Intelligence based Universal Camera Hub (Crowdfunding)

Every day people are getting more concerned about the security of their homes, families, offices, properties, and other related belongings getting more people investing in products and services that helps boost that security. Although we have several products that can be used for home security, Cameras are arguably the most common and important one. Cameras are one the most used home security solutions, and they come in various variants. One of the challenges that come with cameras is that a camera platform from company A won’t mostly work with company’s B platform, thus constraining the user to one single expensive platform or be tempted to juggle around different platforms. Camect is a Camera Hub powered by Artifical Intelligence that intends to address this problem. Camect can aggregate video feeds from any security camera on your home network regardless of the brand. Camect I believe is the OpenHAB for cameras. […]

September 17, 2019 by Stephen Vicinanza - 11 Comments

BalenaOS may be the First Fully Functional 64-bit OS for Raspberry Pi 4

BalenaOS 64-Bit OS Balena just announced the release of a 64-bit OS for the Raspberry Pi 4, that latest release of the iconic SBC. BalenaOS is designed to run 32-bit and 64-bit Docker containers side-by-side and simultaneously. It also supports up to 4GB of memory, to accomplish that feat. The balenaOS also supports several other embedded systems and versions of Raspberry Pi How BalenaOS Is Set Up The BalenaOS is opensource, Yocto Linux-based host OS made for containers. The workflow is fast and current and allows for a number of different embedded systems, but especially Raspberry Pi 4 in a 64-bit environment. The Main Advantage With the advances in the Raspberry Pi 4 platform, the faster data throughput, improved graphics handling, and the faster processor speeds, the BalenaOS is taking full advantage of the Raspberry Pi 4. It adds a wide variety of possibilities to a platform that was waiting […]