Operating Systems Category - Page 642 of 966 - CNX Software

July 14, 2015July 14, 2015 by Jean-Luc Aufranc (CNXSoft) - 26 Comments

ODROID-XU4 Development Board is a Smaller and Cheaper Version of ODROID-XU3 Board

Many people are expecting Hardkernel to launch an Exynos 7 board, but this won’t be with ODROID-XU4, maybe with ODROID-XU5, as the latest development board from Hardkernel is a modified version of ODROID-XU3 with the same Exynos 5422 octa-core processor with four Cortex-A15 cores @ 2GHz and four Cortex-A7 cores. ODROID-XU4 board specifications (differences with ODROID-XU3 highlighted and sometimes crossed out in bold): SoC – Samsung Exynos 5422 quad core ARM Cortex-A15 @ 2.0GHz quad core ARM Cortex-A7 @ 1.4GHz with Mali-T628 MP6 GPU supporting OpenGL ES 3.0 / 2.0 / 1.1 and OpenCL 1.1 Full profile System Memory – 2GB LPDDR3 RAM PoP (750 MHz, 12GB/s memory bandwidth, 2x32bit bus) Storage – Micro SD slot (up to 64GB) + eMMC 5.0 module socket (16, 32, and 64GB modules available) Video Output – micro HDMI (Up to 1080p) and DisplayPort (up to 2160p) Audio Output – HDMI, 3.5mm headphone jack, […]

July 13, 2015 by Jean-Luc Aufranc (CNXSoft) - 21 Comments

Linux Based Zsun WiFi Card Reader Has Been Hacked Too…

A little while ago, I purchased Zsun SD111 W-Fi USB flash drive, and after several tentatives, I finally found a way to access the device’s serial console. Since then the company announced another wireless storage device with Zsun Wi-Fi card reader, and Zoobab decided to try to hack it too. Since the device is pretty hard to open without damaging the enclosure, connecting the serial pin was not really an option, and the first exploit was to input shell commands in the web interface SSID field… For example, entering reboot there, would indeed reboot the device. However, this would still not allow full shell access, and finally after a broader port scan, it was found out that TCP port 11880 was open for telnet daemon. You can then access the shell as root with the same password as SD111: “zsun1188”. For some reasons, telnet can’t work with the device, and […]

July 12, 2015August 29, 2015 by Jean-Luc Aufranc (CNXSoft) - 18 Comments

Intel Braswell Motherboards (N3150 / N3050) Are Now Available for $60 and Up

Intel recently launched Braswell processors to succeed to their Bay Trail processor family, using 14nm lithography, a newer generation Intel GPU, more L2 cache, and various other improvements. Some ASRock motherboards based on such processors are now listed on Newegg starting at $58.99 with ASRock N3050B-ITX motherboard (dual core processor), and $69.99 for the quad core version (ASRock N3150B-ITX). Apart from the different processors, both mini-ITX motherboard mostly share the same specifications: SoC Intel Celeron N3050 dual core processor @ up to 2.16 GHz with Intel HD Graphics Gen8 @ up to 600 MHz – 6W TDP Intel Celeron N3150 quad core processor @ up to 2.08 GHz with Intel HD Graphics Gen8 @ up to 640 MHz – 6W TDP System Memory – 2x 240-pin DDR3/DDR3L 1600/1066 for up to 16GB RAM Storage – 2 x SATA3 6.0 Gb/s Connectors, support NCQ, AHCI and Hot Plug Audio Codec – […]

July 11, 2015June 18, 2018 by Jean-Luc Aufranc (CNXSoft) - 7 Comments

WeTek OpenELEC Box Comes with DVB or ATSC Tuners for $91

WeTek Play TV boxes are Android set-top boxes with DVB-T2/C2, DVB-S2, or ATSC tuner powered by Amlogic AML8726-MX dual core Cortex A9 processor. Even though the hardware is not the greatest right now, I found that it did a pretty good job with video playback and digital TV playback and recording in my review of the DVB-S2 version. The company also provided various images including one using OpenELEC, a Linux based distribution running Kodi only. But now, if you’d rather have OpenELEC pre-installed in the box, instead other Android, WeTek made an OpenELEC box based on the same hardware platform selling for $90.55 on OpenELEC website. OpenELEC box has mostly the same hardware specifications as WeTek Play: SoC – Amlogic AML8726-MX dual core Cortex A9 @ 1.5GHz with Mali-400MP GPU System Memory – 1GB DDR3 Storage – 4 GB NAND flash + 1x micro SD slot Video Output – HDMI, […]

July 10, 2015July 10, 2015 by Jean-Luc Aufranc (CNXSoft) - 7 Comments

Rockchip RK3368 based Beelink i68 Media Player Sells for $66 and Up

The 64-bit ARM TV boxes are coming either with Rockchip Rk3368, Amlogic S905, or Allwinner A64, but so far I could not find much price information. The good news is that the first 64-bit ARM mini PCs will be cheap, as Beelink i68, powered by Rockchip RK3368 octa-core Cortex A53 processor, is listed for as low as $66.35 with 1GB RAM on Gearbest, but you can also select the 2GB RAM version for $81.68. Using coupon BI68 will reduce the price further by one or two dollars. Beelink i68 specifications: SoC – Rockchip RK3368 octa core Cortex A53 processor @ 1.5 GHz with PowerVR G6110 GPU System Memory – 1 or 2 GB DDR3 Storage – 8GB eMMC flash + SD card slot up to 64GB Video Output – HDMI 2.0 up to 4K @ 60Hz Audio Output – HDMI, optical S/PDIF Connectivity – 10/100M Ethernet, dual band Wi-Fi 802.11 […]

July 10, 2015 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

96Boards Enterprise Edition Specification Published

When AMD announces its 96Boards Enterprise Edition complaint server board, I could read quite a few complains because the board used a non-standard form-factor such as mini-ITX. The first version 96Boards Enterprise Edition specification has now been published, and the goods news is that there are two versions: the low cost ($199 to $399) “Standard version” with the new proprietary format, and likely more expensive “MicroATX version” that must complies with MicroATX v1.2 specs. The minimum hardware requirements are listed as follows: Small form factor Standard EE version – 160 x 120mm microATX EE version – 244 x 244mm Design is SoC independent (targets 32 or 64 bit SoCs) 1GB RAM (16GB strongly recommended for server software development) Minimum on-board connectors and expansion I/O 1x Serial over USB UART with microUSB interface 2x USB 1x RJ45 Ethernet Standard version board power from low cost 12V DC Jack connector or standard […]

July 9, 2015May 29, 2017 by Jean-Luc Aufranc (CNXSoft) - 21 Comments

Banana Pi BPI-M3 Development Board Features Allwinner A83T Octa core Processor

Banana Pi developers, in this case SinoVoIP, and not LeMaker, are about to launch a new board: BPI-M3 powered by Allwinner A83T octa core Cortex A7 processor with 2GB RAM and 8GB eMMC. Banana Pi M3 board specifications: SoC – Allwinner A83T octa-core ARM Cortex-A7 @ 2.0 GHz with PowerVR SGX544MP GPU supporting OpenGL ES 2.0/1.1, OpenCL 1.1, DX 9.3. System Memory – 2 GB LPDDR3 Storage – 8 GB eMMC + SATA (via Genesys GL830 USB bridge, shared with 2 USB ports) + micro SD slot Display Interfaces / Video Output – HDMI 1.4 up to 1920×1200, MIPI DSI connector Audio – 3.5mm headphone jack, microphone, HDMI audio Camera I/F – MIPI CSI and Parallel camera interfaces Connectivity – Gigabit Ethernet (Realtek RTL8211E/D), 802.11 b/g/n Wi-Fi and Bluetooth 4.0 (AP 6212 module) USB – 2x USB 2.0 host port, 1x micro USB OTG Debugging – UART for console Headers […]

July 8, 2015July 17, 2015 by Jean-Luc Aufranc (CNXSoft) - 21 Comments

Eny EM95 Android Mini PC Runs Android 5.1 on Amlogic S905 Processor

Amlogic S905 is the first 64-bit ARM processor by Amlogic, and comes with four ARM Cortex A53 cores coupled with a Mali-450MP GPU, with S912 to follow later with the same CPU cores, but more powerful Mali-T7xx GPU. With Acemax G9C we already have one company working on an Amlogic S905 TV box, but Eny Technology just informed me they are about to launch two models based on Amlogic armv8 processor: EM95-MXQ, which looks exactly like G9C, and EM95 with a different casing, but very similar specs. Eny EM95 specifications: SoC – Amlogic S905 quad core ARM Cortex-A53 @ up to 2.0GHz with quad core Mali-450MP GPU up to 750MHz System Memory – 1GB DDR3 (Option: 2GB) Storage – 8GB NAND flash (Option: 16GB) + SD card slot Video Output – HDMI 2.0 up to 4K @ 60Hz with support for CEC and HDCP 2.2 , AV output Video Codecs […]