Processors Category - Page 824 of 1184 - CNX Software

June 23, 2016June 23, 2016 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

Forlinx i.MX6UL Linux Single Board Computer Supports ESAM Embedded Security Control Module

Forlinx Embedded has introduced i.MX6UL single board computer (SBC) based on NXP i.MX 6Ultralite Cortex A7 processor with 512 MB RAM, 8GB storage, that includes two Ethernet interface, an LCD interface, a CAN bus, as well as ESAM (Embedded System Access Module) support via either a SIM card like slot, or a 8-pin DIP chip compatible with ISO7816 standard, and typically used in the financial, telecommunications, transportation sectors for authentication and secure data transfer. Forlinx I.MX6UL board specifications: System-on-module: SoC – NXP i.MX 6Ultralite ARM Cortex A7 processor @ up to 528 MHz with 2D graphics GPU System Memory – 512 MB LvDDR3 memory Storage – 8GB eMMC flash (but hardware manual says 1GB eMMC flash, but also mentioned MTFC8GACAAAM-1M WT so it must 8GB after all…) 2x 80-pin board to board connectors with signals for 2x CAN bus, 2x USB device, 2x SDIO, 2x 10/100M Ethernet, 24-bit RGB, 4x […]

June 23, 2016June 23, 2016 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

TVPRO HD6 is an Intel Bay Trail mini PC Designed for Video Conference

Intel Atom Z3735F processor has been one of the most popular low power Intel Atom processor, and has been found in tablets, mini PCs, TV sticks running Windows, Android or Linux operating systems. TVPRO HD6 is still marketed as a mini PC, but the form factor is a little different as it includes a high-definition camera, and has been designed to be placed on top of the television to be used as a video conferencing system with Skype, Google Hangout, or other similar applications. TVPRO HD6 specifications: SoC – Intel Atom Z3735F “Bay Trail” quad core processor @ 1.33 GHz / 1.83 GHz with Intel HD graphics System Memory – 2 GB DDR3 Storage – 32 GB eMMC flash + micro SD card slot up to 128GB Video Output – 2x HDMI output Audio – 2x HDMI, 3.5mm headphone jack, 3.5mm microphone jack, dual microphone up to 5 meters range, […]

June 22, 2016 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

Get an Early ESP32 Board by Contributing to Luanode for ESP8266 & ESP32 Project (Crowdfunding)

Development boards and module based on Espressif ESP32 dual core processor with WiFi and Bluetooth LE connectivity are due for Q3 or Q4 2016, but you could get an early sample as early as July if you contribute to Jimmy Wu’s (of wifimcu.com) crowdfunding campaign to develop Luanode (Lua SDK) for ESP8266 and ESP32 processors, as ESP32 boards are part of the rewards. Luanode is a Lua SDK for ESP32 and ESP8266 that supports multi-tasking through FreeRTOS, and includes support for peripherals. The source code and documentation can be already be found on Github, and the main differences against something like NodeMCU appear to be multi-tasking and (for now) ESP32 support. Interestingly the SDK contains a tools called WiFi-Killer uses for Denial of Service (DoS) attacks using ESP8266 or ESP32 modules… One hardware project is called WiFi tank comprised of one T300 Tank Chassis, ESP8266 Development Kit, 720p HD Camera, […]

June 22, 2016 by Jean-Luc Aufranc (CNXSoft) - 192 Comments

Shenzhen Tomato X96 Amlogic S905X TV Box is Designed to be “Hooked” Behind Any Monitor or Wall Mounted

There are several solutions to mount a mini computer or TV box behind a display, and while VESA mount is one of them, your TV may not support it, so Shenzhen Tomato has come up with “magic tape” combined with an IR extension cable to help you hook their latest X96 TV box behind your TV. Let’s go through the main specifications first: SoC – Amlogic S905X quad core ARM Cortex-A53 @ up to 1.5GHz/2.0GHz with penta-core Mali-450MP GPU @ 750 MHz System Memory – 1GB DDR3 (option: 2GB) Storage – 8GB eMMC flash (option: 16GB) + micro SD card slot up to 64GB Video Output – HDMI 2.0a up to 4K @ 60 Hz, and AV port (composite video) Audio Output – HDMI, optical S/PDIF, AV port (stereo audio) Video Codecs – 4K VP9 @ 60 fps, 4K 10-bit H.265 @ 60 fps, 4K H.264 up to 30 fps Connectivity […]

June 22, 2016August 28, 2020 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Espressif ESP8285 is just like ESP8266 but with 1MB built-in Flash, and Designed for Wearables

Espressif announced ESP8285 WiFi SoC was entering production last March. The new processor is based on ESP8266, but the company added 1MB built-in flash to make the solution smaller, and more suitable to wearables such as smartwatches and activity trackers. ESP8285 features a Tensilica L106 32-bit MCU and another ultra-low-power 16-bit RISC core, as well as 802.11 b/g/n/d/e/i/k/r WiFi connectivity. AI Thinker has already produced a tiny module based on the solution, called ESP-8285, and another person has developed an ESP8285 development board sold on Tindie for $24.95, and with some code sample (Arduino sketches) on Github. You’ll also find some more technical information on a Devacron blog post, or inside the datasheet on Espressif website. Via Hackaday Jean-Luc Aufranc (CNXSoft)Jean-Luc started CNX Software in 2010 as a part-time endeavor, before quitting his job as a software engineering manager, and starting to write daily news, and reviews full time later […]

June 22, 2016June 22, 2016 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

DIY Wireless Window/Glass Mounted Camera Based on Raspberry Pi Zero Board

A few weeks ago, the Raspberry Pi foundation announced a new version of the Raspberry Pi Zero with a CSI camera connector. Since the solution is quite lightweight, Steven Cassidy had the idea to make a WiFi enabled window camera by soldering a USB WiFi module and fitting the hardware to a plastic part with two suction cups. Once the assembly is done, you can stuck the hardware to a window or glass of your choice in your home, car, aquarium, etc… If you like the concept but would like to have something working out of the box instead of making your own, the Pi Hut has design ZeroView on the same principle, and which will sell for 7 GBP (~$10.3). Jean-Luc Aufranc (CNXSoft)Jean-Luc started CNX Software in 2010 as a part-time endeavor, before quitting his job as a software engineering manager, and starting to write daily news, and reviews […]

June 21, 2016January 16, 2023 by Jean-Luc Aufranc (CNXSoft) - 17 Comments

WeTek Hub TV Box Unboxing and Teardown

WeTek Hub is the latest TV box by WeTek running Android 5.1 or OpenELEC, with support for Widewine Level 1 allowing Netflix HD in Android as well as Microsoft Playready DRM, and featuring Amlogic S905-H Rev. C processor that fixes video playback issues on some 4K H.265 DVB streams, and includes Dolby and DTS licenses. The company has now sent me a unit for review, and I’ll check the hardware first before reviewing the TV box in a separate post. WeTek Hub Unboxing The device comes in a blue and black retail package showing some of the key features including WiFi, Dolby, DTS, HDMI, and Bluetooth support. The QR Code on the package redirects to http://www.wetek.com/qr/201603, which just looks like WeTek main page. The top cover of the package can slide to reveal more small boxes with the device and accessories. The device ships with a basic IR remote control […]

June 21, 2016June 21, 2016 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

Fireduino Arduino Compatible Board Features Rockchip RKnanoD Dual Core Cortex-M3 MCU (Crowdfunding)

Rockchip RKNanoD dual core Cortex M3 micro-controller was introduced last year for IoT and audio applications, and the Firefly team, known for their FirePrime or Firefly-RK3288 development boards, has designed an Arduino compatible board based on the MCU with lots of audio ports, Arduino headers, and WiFi connectivity. Fireduino specifications: MCU – Rockchip RKnanoD dual core ARM Cortex M3 MCU @ up to 250 MHz (system core) / 500 MHz (calculate core) with respectively 640 KB and 384 KB RAM Storage – 4 or 8MB SPI flash + micro SD slot Audio 24-bit/192 KHz audio codec (built in MCU) with HW accelerator for APE, FLAC, OGG, and MP3 audio decoding 1x 3.5mm analog audio jack 2x 3.5mm LINE In jacks 1x On-board microphone DLNA wireless audio support Connectivity – 802.11 b/g/n WiFi via Ampak AP6181 module Expansion Arduino header with I2C, SPI, ADC, GPIO, PWM, UART LCD interface (Intel 8080 […]