Video Category - Page 276 of 332 - CNX Software

November 18, 2013November 21, 2013 by Jean-Luc Aufranc (CNXSoft) - 16 Comments

$90 JynxBox M1 Pure Linux XBMC Network Media Streamer

After The Little Black Box (TLBB), there’s now another ARM based media player that comes pre-installed with XBMC Linux: Jynxbox M1 Pure Linux. The device is based on AMLogic AML8726-M1 single core Cortex A9 processor @ 800MHz, and comes with 2GB flash, Wi-Fi and Ethernet connectivity, HDMI output, and more. Jynxbox M1 Pure Linux specifications: SoC – AMLogic AML8726-M1 single core Cortex A9 @ 800MHz with ARM Mali-400 GPU System Memory – N/A (but likely 512 MB) Storage – 2 GB Nand Flash + micro SD/SDHC memory slot (Up to 32GB) Video Output – HDMI 1.3 Audio Output – HDMI Video container formats – AVI, RM/RMVB, MKV, WMV, MOV, MP4, WEBM, DAT(VCD format), VOB(DVD format), MPEG, MPG, FLV, ASF, TS, TP, 3GP Audio formats – MP3, WMA, WMV, APE, OGG, FLAC, AAC, etc… Connectivity – 10/100M Ethernet + 802.11 b/g/n Wi-Fi USB – 3x USB 2.0 host ports Misc – […]

November 17, 2013 by Jean-Luc Aufranc (CNXSoft) - 20 Comments

ZGPAX S5 Android 4.0 SmartWatch Features a Dual Core Processor, a SIM Card Slot

The newly introduced Samsung Galaxy Gear and Sony SmartWatch all work as a smartphone companion, and have limited use if you don’t carry your smartphone with you. The Samsung watch also requires a recent smartphone running Android 4.3 and supporting Bluetooth Low Energy, which current seriously reduces the list of compatible smartphones. There are already standalone smartwatches in the market that include a SIM card slot, and allow you to make phone calls without a phone such as Z1 watch and WiMe NanoWatch. However, these watches feature low-end hardware with ARM9 processor, so the interface may feel a bit sluggish. ZGPAX S5 smartwatch with its Mediatek MT6577 dual core Cortex A9 processor, and 512 MB RAM, will be much more snappier. It runs Android 4.04 with Google Play Store, and comes with features such as a camera, GPS, as well as Wi-Fi and Bluetooth connectivity. SGPAX S5 Specifications: SoC – […]

November 16, 2013 by Jean-Luc Aufranc (CNXSoft) - 10 Comments

$80 SJ1000 Waterproof Sports Camera is a Low Cost Alternative to GoPro Hero Cameras

I’ve recently learned about GoPro action cameras, waterproof cameras with lots of mounting options and a wide angle lense which allows to shot amazing action full HD videos, and the best selling cameras in the world. Since yesterday I wrote about low cost waterproof smartphone, I thought It might be a good idea to write about other waterproof devices, and look at low cost alternatives to the GoPro. The GoPro Hero3 comes in 3 editions: White Edition, Black Edition, and Silver Edition with prices ranging from $199.99 to $399.99. All camera can record @1080p and come with WiFi connectivity. The more expensive model, Gopro Hero3+ Silver Edition, can also record in UHD, and comes with a WiFi remote. The original GoPro still seem to be good values, but if you have a tight budget, SJ1000 action camera (aka F10) offers similar functionalities (1080p30 recording, wide angle, mounting options, waterproofness, but […]

November 15, 2013November 18, 2013 by Jean-Luc Aufranc (CNXSoft) - 7 Comments

Low Cost Rugged, Waterproof and Dustproof Smartphones Powered by Mediatek Processors

If you need a truly waterproof and dustproof smartphone, the Samsung Galaxy S4 Active, compliant with IP67 standard, is probably the most popular phone with this particular feature. However, the phone sells for nearly $600 on site like Amazon, and it may be nice to have some lower cost options. Today, I’ve come across two smartphones powered by Mediatek dual and quad core SoC that are both compliant with IP67 standard, and although their specs do not match the Galaxy S4 Active, the features found in these phones are still pretty good, and they can be purchased at a much lower price. The smartphones I’ll feature in this post are also rugged, which is not really the case for the Samsung device. IP67 standard? What does that mean in practice? The IP Code, Ingress Protection Rating, aka International Protection Rating, classifies and rates the degree of protection provided against the […]

November 15, 2013November 15, 2013 by Jean-Luc Aufranc (CNXSoft) - 10 Comments

Coin is a Smart Card that Replaces All Your Other Cards (Credit, Debit, Loyalty…)

You may have a few cards in your wallet: credit cards, debit cards, gift cards, membership cards, … and it’s just convenient to carry them around all the time. There will soon be a solution with Coin, a smart card where you can store all your other cards data, and use this smart card instead. In order to register your physical cards (up to 8 cards for one Coin), you’ll need to install an application in your Android smartphone, or your iPhone, take a picture of both sides of the cards, and swiping the Coin though a small device provided with the card. Then, when you want to make a purchase, you just click on the button of the Coin to select the card to use, and carry on with your purchase are you would normally do. You may worry about security concerns, but the company behind the Coin has […]

November 15, 2013August 10, 2014 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

Terasic’s Altera DE1-SoC Board Based on Cyclone V Dual Cortex A9 + FPGA SoC Sells for $150 Up

A few months ago, Terasic unveiled its SoCKit powered by Altera Cyclone V dual Cortex A9 + FPGA. They’ve now announced a cheaper version will a less powerful Cyclone V SoC and lower specs (e.g. less RAM, only one sensor, etc…) that sells for as low as $150 for educational or academic purposes, and $199 for the rest of us. Altera DE1-SoC Board specifications: FPGA Device Cyclone V SoC 5CSEMA5F31 Device Dual-core ARM Cortex-A9 (HPS – Hard Processor System) 85K Programmable Logic Elements 4,450 Kbits embedded memory 6 Fractional PLLs 2 Hard Memory Controllers Configuration and Debug Quad Serial Configuration device – EPCQ256 on FPGA (EPCQ = Erasable Programmable Configurable Quad-SPI device) On-Board USB Blaster II (Normal type B USB connector) Memory Device 64MB (32Mx16) SDRAM on FPGA 1GB (2x256Mx16) DDR3 SDRAM on HPS 128MB QSPI Flash on HPS (QSPI Flash does not come pre-installed out of factory) Micro SD […]

November 14, 2013November 14, 2013 by Jean-Luc Aufranc (CNXSoft) - 7 Comments

Ninja Sphere Home Automation and Monitoring Platform

Ninja Blocks is an company providing open source hardware solutions for home automation. Their first product was called Ninja Blocks Kit which includes a Ninja Block (Beaglebone + Arduino based gateway, but they now also support the Raspberry Pi), sensors, sockets, cables, and a power supply, and works with Ninja Platform, an open source software framework. The goal was to simplify the process of developing automation applications by taking care of all low levels tasks such as electronics, embedded programming, network protocols.., and letting “end users” / developers focus on their application. The company is now working on a new version called the Ninja Sphere, including a “Spheramid” gateway, location waypoints (Bluetooth low energy tags), and smart power sockets. Here are the key features of the gateway: Processor – ARM Cortex A8 (probably Texas Instruments Sitara) Color LED Matrix Connectivity – Bluetooth, Bluetooth LE, Zigbee, and Wi-Fi USB Port – […]

November 11, 2013 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

The VERVE Connects Sensors Your Computer for Gaming, Monitoring, and More

The VERVE is a little box that connects to one of the USB port of your Windows or Mac OS X computer (Linux support coming in 2014), and supports up to 7 sensors. It is available as part of a kit for $99 on Kickstarter. The kit includes the VERVE, a mini USB to USB cable, seven “sensors” (A force sensor, a push button, a light sensor, a potentiometer, a motion sensor, a magnet sensor, and a touch sensor), two banana clips for the touch sensor, seven cables to connect the sensors to the VERVE unit, and 5 extension blocks. Once the VERVE unit is connected to your computer, and the needed sensors are connected to the VERVE, you can launch the VERVE application to visualize the sensors data in real-time, and assign a mouse or keyboard action based on the sensor’s data level as shown below. There’s also an […]