Video Category - Page 301 of 331 - CNX Software

November 10, 2012November 11, 2012 by Jean-Luc Aufranc (CNXSoft) - 7 Comments

$444 Smartbeam Android 4.0 Media Player & Projector Powered by Telechips TCC8925

Android is now everywhere, from the ubiquitous smartphones and tablets to cars, cameras, satellites (no kidding), light bulbs (seriously) and more. Today is the first time I’ve come across a full sized projector running Android. The “Smartbeam” is a 2000 lumens 1280×768 (native) projector powered by Telechips TCC8925 with 512 MB RAM and 4 GB Flash running Android 4.0.4 (ICS), so the performance should be very similar to CX-01 mini PC. Here are the specs of this new device: SoC – Telechips TCC8925 up to 833 MHz System Memory – 512 MB RAM Storage – 4 GB NAND Flash WiFi – 802.11 b/g/n Display – 5.8″ Single LCD Panel Display Technology (cnxsoft: But I can’t find any display on any of the pictures…) Projector: Projection Lens – Manual Lens Resolution: Native SGA (1280*768 Pixels), Support Resolution QGA (1920 x 1200) Brightness (Typical) – LED lamp 2000 lumens, more than 320Lux […]

November 8, 2012November 8, 2012 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

Ugoos UG007 Android 4.1 HDMI TV Stick Features Bluetooth and Rockchip RK3066 Processor

There are many low cost Android mini-PCs on the market today, but most of them can only support 2.4 GHz wireless connection (e.g. for keyboard, mouse or “fly mouse”) via an external USB dongle, and very few have built-in Bluetooth support. If you want the performance of UG802 mini PC and use your existing Bluetooth keyboard, game controller, headset…, Ugoos UG007 mini PC might be a good option since it features Rockchip RK3066 dual core processor and comes with Bluetooth v2.1 + EDR support. Here are the specs of Ugoos UG007: SoC – Rockchip RK3066 Dual ARM Cortex-A9 processor clocked @ up to 1.2 GHZ with Mali-400MP4 Quad-core GPU, System Memory – 1GB DDR3 RAM Storage – 8GB NAND Flash + micro SD card slot (Up to 32 GB) Connectivity: Wifi – 802.11 b/g/n Bluetooth 2.1 + EDR (Mediatek MT6622) 3G support via external 3G USB dongle USB – 1x […]

November 5, 2012May 29, 2017 by Jean-Luc Aufranc (CNXSoft) - 9 Comments

PengPod 700 & 1000 – Linux Tablets Based on AllWinner A10

There are plenty of tablet based on AllWinner A10 and A13 processors, but all of them run Android, and you are out of luck if you want to run Linux on your tablet, unless you hack this yourself. But this is about to change as PengPod will launch 2 tablets and 1 mini PC running Linux from NAND flash or micro SD card: PengPod 700 – 7″ tablet with Allwinner A10, 1GB RAM and 8GB Flash PengPod 1000 – 10″ tablet with AllWinner A10, 1GB RAM and 8GB Flash PengStick – AllWinner A10 mini PC with 1GB RAM and 4 GB Flash The table below gives more detailed specifications and comparison of the three devices. Device PengPod1000 PengPod700 PengStick Type Tablet Tablet TV Stick CPU Allwinner A10 AllWinner A10 AllWinner A10 Android 4 4 4 Linux 3.0.42 3.0.42 3.0.42 Screen 10” 7” External Resolution 1024×600 800×480 1080i Ram 1GB 1GB […]

November 2, 2012November 2, 2012 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

Versatile Express TC2 (2xA15, 3xA7) Development Board at ARM Techcon 2012

If you’ve been following Linaro work, you may have read they develop big.LITTLE processing on TC2, a Test Chip based on 2 Cortex A15 cores and 3 Cortex A7 cores. Charbax is at ARM Techcon 2012 and he shot an interesting video showing 2 Versatile Express development boards based on TC2 demonstrate different big.LITTLE processing schedule strategies: The first scheduling strategy switches between Cortex A15 and Cortex A7 depending on the load required. The second scheduling strategy makes use of 5 cores at the same time and runs high load tasks on the Cortex A15 cores whereas simpler tasks are run on Cortex A7 core. This is only available on Android and Linux and the moment. TC2 is an actual silicon (not FPGA), and as they opened the casing of the development kit (Around 5:00 in the video), you’ll see a fan to cool down the SoC as it is […]

November 2, 2012November 2, 2012 by Jean-Luc Aufranc (CNXSoft) - No Comments

199 Euros “Energy Harvesting Solution To Go” Kit with Energy Micro Cortex M3 Starter Kit

If you’re interesting in battery less ultra low power applications, Energy Micro, Linear Technology and Würth Elektronik have announced an energy harvesting development platform early last month. The “Energy Harvesting Solution To Go” Kit is composed of an Energy Micro Giant Gecko (Cortex M3) Starter Kit and an energy harvesting board that is capable of getting enough solar, thermal, piezoelectric or electromagnetic energy to power the MCU board. The power connector shown above connects directly to the Giant Gecko Starter Kit board to provide power. Although there are 4 energy harvesters on the board, only one power source can be selected at a time via jumpers. Several power sources can be selected by using diodes. The board The energy harvesting board offers two integrated energy sources: A solar cell (32mm x 50mm) A thermo-generator (40mm x 40mm). And 2 other external energy sources can be added to the board via […]

November 1, 2012 by Jean-Luc Aufranc (CNXSoft) - No Comments

OLPC XO-4 Touch Laptop Powered by Marvell ARMADA PXA2128

Last year, OLPC (One Laptop Per Child) announced their first laptop powered by ARM, with OLPC X-1.75 powered by Marvell ARMADA 610 single core processor (And sold over 100,000 since Q1 2012). The 2 new models – OLPC XO-4 and OLPC XO-4 Touch – will be upgraded to ARMADA PXA2128 triple core processor (2 ARMv7 Core + 1 Hybrid LPM (Low Power Mode) ARMv7 core), which the OLPC XO-4 Touch offering multitouch support. OLPC XO-4 laptop will look exactly like the OLPC 1.75 laptop pictured below. OLPC XO-4 will have the following specifications: SoC – Marvell PXA2128 (ARMv7 compatible) @ 1 GHz with Vivante GC2000 GPU System memory – 1GB or 2GB DDR3 RAM (Depending on configuration) Mass storage: 4 GB or 8GB NAND flash (eMMC) Internal microSD card slot for repair/replacement Externally accessible SD card slot; Display – 7.5” dual-mode TFT display with touchscreen (2 simultaneous touch max) Audio […]

November 1, 2012November 1, 2012 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

$149 Hardkernel ODroid-X2 Development Board with Exynos 4412 @ 1.7 GHz and 2 GB RAM

You’ve probably heard about the ODROID-X development board announced in July by Hardkernel. They now have an updated version called ODroid-X2 with Samsung Exynos 4412 clocked at 1.7 GHz (vs 1.4 GHz) and 2 GB RAM (vs 1 GB RAM for the first version). They also boosted the Mali 400 clock speed from 400 MHz to 533 MHz. Apart from being a good mobile development platform, the 2 GB RAM could make the board a pretty good native ARM build machine under Ubuntu, as I’ve read 1 GB RAM is not always enough at link stage (e.g. for Debian packages, sorry I can’t find the link), unless you use swap which tremendously slows things down. The rest of the board seems identical and it just looks the same as the first version. Charbax shot a video of Hardkernel ODroid-X2 development board at ARM Techcon 2012: ODroid-X2 will cost $149 (ODroid-X […]

October 31, 2012October 31, 2012 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

VIA ARTiGO A1250 Slim System Powered by Quad Core E-Series Processor

VIA Technologies announced the VIA ARTiGO A1250 slim system featuring a 1.0 GHz VIA QuadCore E-Series processor and VIA VX11H media system processor (MSP). The VIA ARTiGO A1250 is a low profile system targeted at home or office applications such as home server, home automation, hotel management, media streaming, digital signage, surveillance as well as medical and healthcare applications. Here are the key features of ARTIGO A1250: VIA QuadCore E-Series processor (U4650E) @ 1.0 GHz Up to 8GB of DDR3 1333 SDRAM SODIMM Supports one 2.5″ SATA HDD or Flash SSD installation Quiet, ultra slim profile design (3cm high) VIA VX11H media system processor with DirectX11 support 3D and HD video up to 1080p HDMI & VGA display ports with dual independent display support I/O: HDMI, VGA, 2x USB 3.0, 2x USB 2.0, GigaLAN, Audio-in/out/mic-in Average power consumption of 27W TDP Dimensions: 17.7cm x 12.5cm x 3.0cm I understand that inside […]