4k News - Page 58 of 78 - CNX Software

July 29, 2016July 29, 2016 by Jean-Luc Aufranc (CNXSoft) - 23 Comments

SCISHION V88 Rockchip RK3229 TV Box Sells for $19.99 (Promo)

Entry-level Android TV boxes are now already pretty cheap, and in the past we’ve seen deals in for around $25 and less, but with SCISHION V88, I think it’s the first time I see a new 4K Android TV box selling for less than $20 shipped. SCISHION V88 specifications: SoC – Rockchip RK3229 quad core ARM Cortex A7 processor @ 1.5 GHz with ARM Mali-400MP2 System Memory – 1GB DDR3 Storage – 8GB eMMC flash + SD card slot up to 16GB Video Output – HDMI 2.0 up to 4K2K @ 60 fps, and 3.5mm AV output (composite) Audio Output – HDMI, AV, and coaxial S/PDIF Connectivity – 10/100Mbps Ethernet, 802.11 b/g/n WiFi USB – 4x USB 2.0 host ports Power Supply – 5V/2A Dimensions – 11.6 x 11.6 x 2.5 cm The devices runs Android 5.1, and ships with a power adapter, a HDMI cable, an IR remote control, […]

July 24, 2016 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

EBox T8-4 Review – A 4K Android TV Box Bundle Geared Towards the UK Market

I’ve already taken some pictures of the device and board in part 1 of EBox T8-4 review, so today, I’m going to report my experience with the Android 5.1 firmware for this Amlogic S905 TV box, air mouse, and wireless gamepad, specifically targetted to users leaving in the United Kingdom, but since the hardware is based on Zoomtak T8V, it may also be informative to international users, although the firmware, mostly launcher and IPTV services, will be different. EBox T8-4 Setup Wizard & Configuration Since I’ve already inserted an internal SSD into the SATA bay of the device, I did not connect an external USB harddrive, and only connected HDMI and Ethernet cables, plus the RF dongle for the included air mouse, a USB keyboard to easily take screenshots, and of course the power cord. The power button will be red at this stage. If you want to start the […]

July 22, 2016August 5, 2016 by Jean-Luc Aufranc (CNXSoft) - 27 Comments

NEXBOX A95X (S905X) Android TV Box Review – Part 1: Unboxing and Teardown

NEXBOX A95X is an Android TV box that first launched with Amlogic S905 processor, the company thought it was a good idea to make multiple models with the same name with a combination of memory capacity (1 or 2GB), storage capacity (8 or 16GB), and even processor, as you may get a box with Amlogic S905, or Amlogic S905X processor adding 4K VP9 and HDR support. So you should be careful befoire your place an order, and check you got the right model when you receive it. The company now sent me their “high-end” A95X Android 6.0 model with Amlogic S905X processor, 2GB RAM, and 16GB storage, as well as Fast Ethernet and dual band WiFi 802.11 b/g/n support. In the first part of the review I’ll check out the hardware, including the board itself, before testing the firmware in more details in the second part. NEXBOX A95X Unboxing The […]

July 18, 2016July 18, 2016 by Jean-Luc Aufranc (CNXSoft) - 20 Comments

MXQ Pro (G9CX) Android 6.0 TV Box Review – Part 1: Specs, Unboxing and Teardown

Most people probably don’t know Shenzhen Shiningworth Technology, but if you’ve ever bought a low cost Android TV box, it may have been made by them. Companies such as Eny Technology, Acemax, Shenzhen Tomato and other are relying on Shenzhen Shiningworth for some of their products, including the popular MXQ series (although other companies are also using MXQ “brand”), and in the past I often found their MAC address in products I reviewed. But this time, the company decided to send their latest product for review directly with MXQ Pro G9CX. I’ll write a two part review starting with specs and pictures, before testing the firmware and providing the second part of the review in a few weeks. G9CX Specifications Let’s start with the technical specifications: SoC – Amlogic S905X quad core ARM Cortex-A53 @ up to 2.0GHz with penta-core Mali-450MP GPU up to 750MHz+ System Memory – 1GB DDR3 […]

July 13, 2016July 30, 2016 by Jean-Luc Aufranc (CNXSoft) - 52 Comments

Mini M8S II TV Box (Amlogic S905X) Review – Part 1: Unboxing and Teardown

Amlogic S905X powered TV boxes have now hit the market, and compared to existing Amlogic S905 devices add VP9, and provided your TV can handle it, HDR (High Dynamic Range) support. GearBest sent me one of the cheapest S905X TV Box with Mini M8S II, and in the first part of the review, I’ll take some picture of the device, and tear it down, while the second part will be posted later, and focus on testing the firmware. MINI M8S II Unboxing The package was slightly damaged, but nothing to bad. The top reads “Mini TV Box” with some icons describing the main feaures like 4K & H.265/HEVC support, WiFi, and so on. I’ve recently realized that logos and trademarks may cause problems with customs in some countries, and the package does have several potentially problematic trademarks like HBO and Netflix, as well as logos for Twitter, Facebook, Yahoo…. In […]

July 9, 2016July 10, 2016 by Jean-Luc Aufranc (CNXSoft) - 11 Comments

ARNU Box Mach 10 64-bit Pure Linux TV Box Review

In part 1 of ARNU Box Mach 10 64-bit Pure Linux review, I listed the specifications, and took some pictures of the Amlogic S905 based TV box, and its board. I’ve now completed testing of this Kodi Linux media player, going though setup and add-ons, and see how it works compared to ARNU Box Mach 10 Pure Linux based on Amlogic S812 processor. Setup, Cloudword and Configuration The setup part is basically the same as on the previous model, but I’ll go through it again. Please ignore the vertical white line on the TV in the photos below, as it’s just due to my 18 months old LG 42UB820T 4K UHD television being partially broken, and out of warranty. The boot will typically take 30 seconds, but the first time, you’ll go through ARNU Box Setup Wizard. You could skip it in theory, but it’s still a good idea to […]

July 2, 2016 by Jean-Luc Aufranc (CNXSoft) - 40 Comments

Review of Vorke V1 mini PC Powered by Intel Celeron J3160 Processor

After checking out Vorke V1 mini PC hardware in the first part of the review, it’s now time to publish the review starting with system information, benchmarks, and user testing. The device competes with similarly priced devices based on Intel Atom x7 processor such as Voyo V3 and Beelink BT7, so I’ll also include some comparisons to those in the review. Setup and System Information I connected USB keyboard and mouse, an Ethernet cable, HDMI and VGA cables to check dual display support, as well as the power supply. I did not connect my USB 3.0 hard drive since, I’ve already fitted the mini PC with an internal 1TB hard drive. Pressing on the large power button on the top of the device will boot it, and after a few seconds, you’ll get to go through Windows 10 setup by first accepting the EULA. The next steps are Custom or […]

June 30, 2016June 30, 2016 by Ray - 5 Comments

ROOFULL MRX 4K Android TV Box Review

CNXSoft: I’ve got many requests to review TV boxes, but I don’t always have time for them all, so from time to time I get people who help me do reviews, and this review of Roofull MRX TV box powered by Amlogic S905 processor had been done by Ray, who like me has been playing with many other Android TV boxes. ROOFULL MRX Specifications Operation System – Android 5.1 CPU – Amlogic S905 64-bit Quad core Cortex A53 up to @2GHz GPU – Penta Core Mali-450 RAM – 2GB DDRIII ROM – 16GB eMMC flash SD Storage expendable up to 32GB Bluetooth – BT 4.0 Antenna – Built-in antenna for WiFi Media UHD 4K x 2K: Support Full HD 1080P: Support HEVC H.265/H.264: Support Video/Picture Decoding Support: *.mkv,*.wmv,*.mpg, *.mpeg, *.dat, *.avi, *.mov, *.iso, *.mp4, *.rm and *.jpg file formats Audio Format Support: MP3,AAC,WMA,RM,FLAC,Ogg Communication WiFi: IEEE 802.11 a/b/g/n (2.4GHz/5GHz) Ethernet: […]