Single Board Computer News - Page 79 of 105 - CNX Software

March 17, 2020 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

DFI GHF51 Ryzen Embedded R1000 SBC is about the Size of a Raspberry Pi

We’ve seen a fair amount of AMD Ryzen Embedded boards over the last few months including 3.5″ Ryzen Embedded SBC‘s such as Kontron SBC-VR1000 and IBASE Technology IB918, as well as larger boards such as SAPPHIRE FS-FP5R 5×5 motherboard. The most compact Ryzen Embedded board we covered so far must have been the upcoming Sapphire NP-FP5 based on Ryzen R1305G processor with a 4″x4″ (10.16 x 10.16 cm) form factor. But DFI GHF51 1.8″ SBC takes the crown of the smallest Ryzen Embedded SBC, with the business card / Raspberry Pi sized board measuring just 84 x 55 mm, and featuring an AMD Ryzen Embedded R1000-series processor combined with up to 8GB RAM. DFI GHF51 specifications: SoC – AMD Ryzen Embedded R1000 Series with Radeon Vega 3 GPU; 12W CPU System Memory – 2GB/4GB/8GB single-channel DDR4 3200MHz Storage 1x 16GB/32GB/64GB eMMC flash 64Mbit SPI Flash for BIOS (supports UEFI boot […]

March 13, 2020March 15, 2020 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

2.5-inch Pico-ITX SBC Offers LVDS, HDMI & DisplayPort Video Interfaces, Dual Gigabit Ethernet

Today I learned that Pico-ITX boards were also called 2.5-inch boards since they are about the size of a 2.5-inch SATA drive. Kontron pITX-APL V2.0 is one such 2.5-inch Pico-ITX SBC powered by an Intel Atom E39XX or Celeron Apollo Lake processor. The board can drive three independent displays via its 24-bit LVDS interface, HDMI and mini DisplayPort 1.2 output, comes with two Gigabit Ethernet ports and support for 4G LTE connectivity via M.2 slot and SIM card socket. Those features make it suitable for a wide range of applications including industrial client applications, kiosk, infotainment, digital signage, and POS systems. Kontron pITX-APL V2.0 specifications: Apollo Lake SoC variants Intel Atom x7-E3950 quad-core processor @ up to 2.0 GHz with 18EU Intel HD graphics; 12W TDP Intel Atom x5-E3940 quad-core processor @ up to 1.8 GHz with 12EU Intel HD graphics; 9.5W TDP Intel Atom x5-E3930 dual-core processor @ up […]

March 12, 2020March 12, 2020 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

AMD Ryzen Embedded based SBC-VR1000 SBC to Power Edge Computing & Graphics Applications

We just wrote about a 3.5″ Ryzen Embedded SBC a few days ago, namely SECO SBC-C90 single board computer, after mentioning there were few such AMD options in the 3.5-inch form factor with the only other board we covered so far being IBase IB918. But there’s now at least a third option with Kontron introducing SBC-VR1000 3.5-inch board powered by AMD Ryzen Embedded V1000-series or R1000-series processor, and designed for “intensive edge computing and graphics applications” including digital signage, digital casino gaming, kiosk, retail, banking, education, medical imaging, as well as industrial control and automation. Kontron SBC-VR1000 specifications: SoC (one or the other) AMD Ryzen V1605B quad-core processor @ up to 3.60 GHz with 4M cache, AMD Radeon Vega 8 GPU; 15 W TDP AMD Ryzen V1202B dual-core processor @ up to 3.20 GHz with 4MB cache, AMD Radeon Vega 3 GPU; 15 W TDP AMD Ryzen R1606G dual-core processor […]

March 9, 2020April 7, 2020 by Jean-Luc Aufranc (CNXSoft) - No Comments

SECO Unveils 3.5″ Ryzen Embedded SBC, Docker-Compatible EDGEHOG OS Linux Distribution

After IBase IB918, here’s another 3.5″ Ryzen Embedded SBC courtesy of SECO SBC-C90 equipped with a choice of Ryzen Embedded V1000 or R1000-series processor, dual Gigabit Ethernet, and four DisplayPort++ ports. Separately from the hardware announcement, SECO has launched a Yocto-based, Docker-compatible Linux distribution called EDGEHOG OS and supporting containers, OTA updates, and remote management. SECO SBC-C90 SBC Specifications: SoC (one or the other) AMD Ryzen Embedded V1000 family: Ryzen Embedded V1807B quad-core/octa-thread @ 3.35GHz (3.8 Boost) with AMD Radeon Vega 11 Graphics; TDP 35-54W Ryzen Embedded V1756B quad-core/octa-thread @ 3.25GHz (3.6 Boost) with AMD Radeon Vega 8 Graphics; TDP 35-54W Ryzen Embedded V1605B quad-core/octa-thread @ 2.0GHz (3.6 Boost) with AMD Radeon Vega 8 Graphics; TDP 12-25W Ryzen Embedded V1202B dual-core/quad-thread @ 2.3GHz (3.2 Boost) with AMD Radeon Vega 3 graphics; TDP 12-25W AMD Ryzen Embedded R1000 family: Ryzen Embedded R1606G dual-core/dual-thread @ 2.6GHz (3.5 Boost) with AMD Radeon Vega […]

March 7, 2020 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Raspberry Pi or UP Board based Linutop Runs Digital Signage or Web Kiosk Software

Linutop is a French company offering software and hardware solutions for digital signage and secure web kiosks, and this morning we received an email about Linutop OS now working on Raspberry Pi 4 board. Linutop OS is a Xubuntu (x86) or Raspbian (Arm) based OS using XFCE desktop environment, and shipping with the company’s Linutop Kiosk program used to setup a web kiosk or a digital signage player controlled via Linutop TV Digital Signage CMS (Cloud or self-hosted). The kiosk/DS software and the content management system (CMS) are not open-source, but there are free demo versions. If you want to install the full version it will cost you 79 Euros, and a self-hosted license for the CMS goes for 196 Euros. The company also offers Arm and x86 digital signage players based on Raspberry Pi or UP Board SBCs. Linutop XS/XS3 Linutop XS is based on a Raspberry Pi 2 […]

March 5, 2020 by Jean-Luc Aufranc (CNXSoft) - 12 Comments

CloverPI Clusters Up to 4 Raspberry Pi Boards (Crowdfunding)

We’ve seen Raspberry Pi cluster boards before, and most of them either use Raspberry Pi Zero boards or Raspberry Pi Compute Modules. Some examples include Turing Pi Clusterboard for up to 7 RPi CM3 modules, Cluster HAT board taking up to 4 Pi Zero board, and Mininodes Raspberry Pi 3 COM Carrier Board. But some other solutions like Bitscope rely instead on full-sized Raspberry Pi 2/3/4 Model B boards. Another such option is IPTerra CloverPI board allowing up to 4 Raspberry Pi or compatible boards with 40-pin header to be clustered into a single unit powered by one power supply and connected via a 5-port Gigabit Ethernet switch. CloverPI is shown above without RPi boards. The mainboard includes four 40-pin headers, four 6-pin Ethernet headers for SBC’s, as well as one Gigabit Ethernet port, and one power jack. There’s also a board/card fitted in the middle of the latest version […]

March 3, 2020 by Jean-Luc Aufranc (CNXSoft) - No Comments

Congatec conga-SMC1 3.5″ Carrier Board is Designed for NXP i.MX8 SMARC Modules

3.5-inch carrier board with NXP i.MX8 SMARC Module

Last year, Congatec introduced SMARC 2.0 compliant systems-on-modules based on NXP i.MX 8, i.MX 8M Mini and i.MX 8M Nano processors, together with Conga-SEVAL carrier board designed for evaluation and early software development, but is not suitable for deployment in the field. The company has now unveiled a standard 3.5″ carrier board – conga-SMC1 – that takes any of the company’s i.MX8 SMAC modules, in order to help their customers bring products faster to market thanks to a commercial-off-the-shelf (COTS) board. Congatec conga-SMC1/SMARC-ARM carrier board features and specifications: Supported SoM – conga-SMX8 (i.MX8), conga-SMX8-Mini (i.MX 8M Mini), or conga-SMX8-Nano (i.MX 8M Nano). Future SMARC 2.0 Arm-based modules should also be supported Storage – 1x SATA III (support of SATADOM VCC PIN 7 and PIN 8), 1x SATA power (+5V, +12V), MicroSD card socket, M.2 NVMe SSD support Display Interface 1x LVDS 18/24bit single/dual channel LVDS 2x optional eDP/DSI (dependent on […]

February 27, 2020July 10, 2020 by Jean-Luc Aufranc (CNXSoft) - 16 Comments

Price of Raspberry Pi 4B with 2GB RAM Drops to $35 Permanently

Raspberry Pi 1 Model B was introduced to the world almost exactly 8 years ago on February 29, 2012, and to celebrate the Raspberry Pi Foundation decided to permanently lower the price of Raspberry Pi 4B with 2GB RAM to $35. This was made possible due to falling RAM prices. The 1GB RAM version will still be sold for $35 to industrial and commercial customers due to long term support commitments. Sadly, the 4GB RAM version remains at $55, so no discount for this version for now. Due to inflation, Raspberry Pi 4B 2G is even cheaper than the first Raspberry Pi 1 since $35 in 2012 is roughly equivalent to $40 now. But more importantly, 8 years make a huge difference in terms of performance and features. The Raspberry Pi Foundation explains the new board is now 40 times faster, has eight times more memory (the very first batch […]