airplay News - Page 4 of 4 - CNX Software

January 2, 2014January 2, 2014 by Jean-Luc Aufranc (CNXSoft) - 7 Comments

iPush Hi768 HDMI/AV Wi-Fi Display Dongle Supports DLNA, and Airplay for $22

Now EZCast dongles are my preferred type of Wi-Fi display dongle, although there are not perfect, they support Android, iOS, Windows, and Mac OS, and beside the proprietary EZCast protocol, they also support Miracast, Airplay, and DLNA. However, they cost between $30 to $40, and if all you are after is a cheap DLNA and Airplay adapter, you could get iPush Hi768 for $21.99 including shipping. This device also features an AV output (composite + stereo audio) to mirror your phone on your old TV. Here are the specifications as listed on Pandawill and some other sources: SoC – ACTIONS SEMI ATV6003 @ 500MHz System Memory – 64M or 128M DDR2 Storage – 16MB NOR flash Video Output – HDMI, AV/CVBS Connectivity – Wi-Fi 802.11 b/g/n (Built-in Realtek 8188 SDIO WiFi Module) Protocol – DLNA and Airplay. Power Supply – 5V/0.5A via micro USB port Dimensions – 76 x 36 […]

December 6, 2013 by Jean-Luc Aufranc (CNXSoft) - 10 Comments

Tronsmart T1000 Mirror2TV EZCast, Miracast, Airplay, DLNA HDMI Dongle Sells for $29.99

There has already been several dongles released to the mark that support Miracast, Airplay, and DLNA, either a subset, or a combination of the standards. One of the cheapest is iPush that now sells in the low $20, but there are different models, and one of them is only supporting DLNA. A couple of months later, EZCast was released with support for DLNA, as well as Miracast and Airplay (with some limitations), and their own EZCast support. EZCast is supported on several hardware dongles that often sell for about $35 to $45, and although it’s not outrageously expensive, you can get full single or dual core Android HDMI TV for this price. I’ve just come across a new product called Tronsmart T1000 Mirror2TV sold for $29.99 including shipping by GeekBuying, and a couple of sellers on Aliexpress, that appears to be another EZCast dongle with support for Miracast, Airplay, and DLNA. […]

August 29, 2013August 29, 2013 by Jean-Luc Aufranc (CNXSoft) - 22 Comments

RK2928 Miracast Adapter (MOCREO M1) Is Now Available for $26

Rockchip (via Charbax) has been teasing us with their upcoming RK2928 miracast adapter since the Hong Kong Electronics Fair in April 2013. It appears a device is finally available on DealExtreme with MOCREO M1 (iPush) for $25.90 including shipping. It’s using the same casing as the other iPush or Ezcast (MSD03) HDMI sticks, but the guts of the device are different: Processor – Rockchip RK2928 single core ARM Cortex A9 @ 1.0 GHz System Memory – 256MB DDR3 Storage – 16 MB Serial Flash Connectivity – Wi-Fi: 802.11b/g/n Video Output – HDMI V1.4 Multi-screen protocol – DLNA / Airplay / Miracast Video Format – RMVB / WMV / ASF / AVI / 3GP / MPG / MKV / MP4 / MOV / MPEG2 / MPEG4 Audio decoding – MP3 / OGG / WAV / APE / CDA / MIDI / WMA / AAC; Power adapter: 5V / 1A (Micro USB) […]

May 31, 2013May 29, 2017 by Jean-Luc Aufranc (CNXSoft) - 112 Comments

$32 iPush Wi-Fi DLNA / Miracast Adapter for Android

Last time I wrote about Miracast / DLNA dongles, the price was about $55, but today I’ve found a new device closer to my target price ($25) with IPUSH Miracast adapter that sells for $31.90 on DealExtreme. [Update: Several users report it’s only a DLNA dongle, and it does not support Miracast yet] Here are the specifications according to DealExtreme: SoC – Allwinner A10s Cortex A8 + Mali-400 GPU Wi-Fi 802.11b/g/n USB – 1x micro USB port for power Video Output – HDMI 1.4 Supports DLNA and Miracast mode Power – 5V / 0.5A The device comes with an HDMI cable and a micro USB cable used to connect the device to your TV HDMI and USB ports, or if your TV lacks USB, a USB power adapter. However, I’ve done a little more research, and it turns out iPush is also a product designed by Action Semi, that just […]