Android News - Page 137 of 364 - CNX Software

October 31, 2016November 2, 2016 by Jean-Luc Aufranc (CNXSoft) - 121 Comments

Giveaway Week – VR SKY CX-V3 Android Virtual Reality Headset

It’s been a while since I’ve organized a Giveaway week, and with Christmas less than two months away, it might be a good time to launch another one. It will take place on October 31 – November 6 with one device or board offered every day, starting with VR SKY CX-V3 All-in-one Android VR Headset. CX-V3 review showed that it’s good enough to play 2D and 3D videos, but Allwinner H8vr might not be quite powerful enough for VR games, and the IPD (Interpupillary distance) is not adjustable, so depending on the distance between your eyes, virtual reality apps may not be usable at all. That’s not a problem for videos however. I’ll send the kit with all accessories to the lucky winner. To enter the draw simply leave a comment below. Other rules are as follows: Only one entry per contest. I will filter out entries with the same […]

October 28, 2016October 28, 2016 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

CS668 Combines Android TV Box, Power Bank, and Bluetooth Speakers Into One Device

CS668 is an Android 6.0 TV box powered by Amlogic S905X quad core processor, which triples as Bluetooth stereo speakers and a power bank thanks to its built-in 5,000 mAh battery. CS668 3-in-1 TV box specifications: SoC – Amlogic S905X quad core ARM Cortex-A53 @ up to 1.5 GHz with Mali-450MP GPU System Memory – 1GB DDR3 Storage – 8GB eMMC flash + micro SD slot up to 32 GB Video Output – HDMI 2.0a up to 4K @ 60 Hz Audio I/O – HDMI output, 3.5mm headphone jack, 10W stereo speakers, built-in microphone Connectivity – 802.11 b/g/n Wi-Fi @ 2.4 GHz and Bluetooth 4.0 (AP6212 module) USB – 3x USB 2.0 host ports, 1x micro USB OTG port Misc – Power & Play/Pause combo button, and volume buttons Battery – 5,000 mAh rechargeable lithium battery good for up to 48 hours Power Supply – 5V/3A Dimensions – 15.1 cm […]

October 28, 2016October 31, 2016 by Jean-Luc Aufranc (CNXSoft) - 12 Comments

NanoPi S2 Quad Core ARM Linux Board Comes with WiFi & BT Connectivity, HDMI, LVDS, and LCD Interfaces

FriendlyARM has released a bunch of Allwinner based NanoPi Allwinner boards recently, but they also have some Samsung/Nexcell S5P ARM Cortex A9 boards in their portfolio, and the latest is NanoPi S2 with Samsung S5P4418 quad core processor, three display interfaces, a camera interface, wireless connectivity through WiFi and Bluetooth 4.0, a 40-pin “Raspberry Pi” header, and more. NanoPi S2 specifications: SoC – Samsung/Nexcell S5P4418 quad core Cortex A9 processor @ 400 MHz to 1.4 GHz with Mali-400MP GPU System Memory – 1 GB DDR3 Storage – 8GB eMMC flash + micro SD slot Video Output / Display I/F – micro HDMI port up to 1080p60, 24-pin LCD RGB interface, 24-pin LVDS interface Audio – 3.5mm audio jack, micro HDMI Camera – 24-pin DVP camera interface Connectivity – 802.11 b/g/n WiFi + Bluetooth 4.0 classic & LE (AP6212 module); IPEX/u.FL antenna connector USB – 1x USB 2.0 Host, 1x micro […]

October 26, 2016 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

$28 MK809V 4K Android TV Stick is Powered by Rockchip RK3229 Processor

Rockchip RK3229 is found is some ultra-cheap 4K Android TV boxes such as SCISHION V88 are selling for as low as $20. If you prefer HDMI TV stick form factor, there’s now MK809V 4K TV stick based on the processor, which I’ve first noticed on DealExtreme for $30.71, but it can also be found on other sites such as GeekBuying for $27.99, or eBay for $33. MK809V-4K HDMI TV dongle specifications: SoC – Rockchip RK3229 quad core ARM Cortex A7 processor @ 1.5 GHz with ARM Mali-400MP2 System Memory – 1GB DDR3 Storage – 8GB eMMC flash + micro SD card slot up to 32GB Video & Audio Output – HDMI 2.0 up to 4K2K @ 60 fps with CEC support Connectivity – 802.11 b/g/n WiFi up to 150 Mbps + Bluetooth 4.0 LE (Realtek RTL8723) USB – 1x USB 2.0 host ports, 1x micro USB OTG port, 1x micro […]

October 26, 2016June 5, 2017 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

Intel Introduces 3 Atom E3900 Apollo Lake Processors for IoT, Industrials and Automotive Applications: x5-E3930, x5-E3940, x7-E3950

Intel previously introduced Celeron and Pentium Apollo Lake processors for laptops and mini PCs, and it seemed Atom was gone for good from that processor family, but the vendor has now introduced Atom E3900 “Apollo Lake” processor family for IoT, industrial and automotive applications with three models: x5-E3930, x5-E3940, and x7-E3950. All three new processors will support up to 8 GB of LPDDR4/DDR3L memory, come in a FCBGA1296 package, be manufactured using 14 nm process, support 4K UHD video output up to 60 Hz on three independent displays, up to 15 simultaneous 1080p30 video stream, as well as 13MP cameras for photos and 1080p60 video capture. Peripherals interfaces include SATA 3.0, PCIe lane, HDMI, DisplayPort, embedded DisplayPort, USB 3.0 & 2.0 ports and more. The new processors also integrate Intel Time Coordinated Computing (TCC) Technology that “coordinates and synchronizes peripherals and networks of connected devices, achieving improved determinism. It can […]

October 25, 2016May 29, 2017 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

Theobroma Systems Introduces Micro Qseven Allwinner A64 System-on-Module

Theobroma Systems, an Austrian based engineering services and embedded systems solutions company, has been designing Allwinner based systems-on-module compliant with Micro Qseven standard for a while, starting with Allwinner A31 A31-μQ7 module in 2015. The company has now launched A64-μQ7 system-on-module powered by Allwinner A64 quad core Cortex A53 processor. A64-μQ7 module specifications: SoC – Allwinner A64 quad core ARM Cortex A53 processor with Mali-400MP2 GPU System Memory – Up to 2GB DDR3 on module Storage – Up to 64GB eMMC flash, Up to 16MB SPI NOR flash Display I/F (via edge connector) – HDMI 1.4 up to 4K @ 30 Hz, MIPI DSI up to 1920×1200 @ 60 Hz Connectivity – 10/100/1000 Mbps PHY USB – 7x USB 2.0 ports including one dual-role port Other I/Os – On-module communication offload controller for CAN, UART, 8x GPIO, I2S, I2C, SMBus, SPI, FAN Security – Optional Global Platform 2.2.1 compliant JavaCard […]

October 24, 2016October 25, 2016 by Jean-Luc Aufranc (CNXSoft) - 28 Comments

Beelink GT1 TV Box Review – Part 2: Android Marshmallow Firmware

I’ve previously reviewed other Amlogic S912 TV boxes such as M12N MXQ Plus or Qintaix Q912, but Beelink GT1 has the advantage of being quite cheaper at $56 and up, but still come with many of the same features as more expensive devices. I’ve already posted pictures, and checked out the hardware design in the first part of Beelink GT1 review, so in the second part I’ll report my experience with Android, including video and audio capabilities, hardware features testing, and some benchmarks. First Boot, OTA Firmware Update, Settings, and First Impressions The device comes with two USB ports only, so I connected a USB hard drive to one of the port, and a USB hub to the other with the RF dongles for MINIX NEO A2 Lite air mouse and Tronsmart Mars G01 gamepad, as well as a USB keyboard to take screenshots. I completed the setup by adding […]

October 24, 2016 by Jean-Luc Aufranc (CNXSoft) - 16 Comments

Zidoo X8 Android TV Box, OpenWrt NAS, and HDMI Recorder Sells for $109

I posted my review of Zidoo X9S Android TV box, HDMI recorder and OpenWrt NAS a few days ago, and despite some limitations with regards to 4K video playback, the device is working pretty well. The $140 price tag might be a little more than some people are ready to pay, and the good news is that the company has now launched a cheaper model based on the same processor called Zidoo X8, without the external SATA port, and less storage. Zidoo X8 specifications: SoC – Realtek RTD1295 quad core Cortex A53 processor @ 1.4 GHz with ARM Mali-T820 MP3 GPU System Memory – 2 GB DDR3 Storage – 8 GB eMMC flash + micro SD slot + SATA 3.0 interface Video I/O – HDMI 2.0a output, AV output and HDMI 2.0 input (Support up to 4K60 input, but record/stream up to 1080p @ 30 Hz) Audio I/O – HDMI […]