Telechips TCC893x Dual Core ARM Cortex A9 + Cortex M3 SoCs: TCC8930, TCC8933, TCC8935

Sometimes last year, Telechips discreetly released a triple core SoC comprised of 2 ARM Cortex A9 cores and one Cortex M3 core for tablet, set-top boxes, media player and car AVN (Audio, Video & Navigation). A dual core release in 2013 may not be that interested, but the addition of a Cortex M3, and high performance interfaces such as Gigabit Ethernet and USB 3.0 may make it interesting. Let’s have a look. There’s very little information on Telechips TCC893x page, apart from the block diagram above and the following description: The TCC893x is a system-on-chip with powerful multimedia solution and high performance such as dual decoding. It is ideal for high-end multimedia devices such as Set top box, Media Box, Car AVN, and Tablet. TCC893x multimedia application processor based on Cortex-A9 Dual & M3 has multi-format hardware video accelerator optimized to reduce power consumption, high-performance 2D/3D graphic engine for rich […]

$69.95 NanoPC-T1 by FriendlyARM Features Samsung Exynos 4412 SoC

If you like low cost boards by Hardkernel such as ODROID-U3, but the add-ons required, and/or shipping costs put you off, an alternative will soon be available thanks to FriendlyARM NanoPC-T1, a tiny computer designed and manufactured by CoreWind Tech FriendlyARM Guangzhou, and powered by Samsung Exynos 4412 quad core Cortex A9 SoC with 1GB RAM, and 4GB built-in flash. FriendlyARM NanoPC specifications: SoC – Samsung Exynos 4412 quad core Cortex-A9 @ 1.5GHz + Mali-400MP4 GPU System Memory – 1GB DDR3 RAM, 32bit data bus Storage – 4GB eMMC Flash + SD Card slot Connectivity – 10/100M Ethernet (RJ45) Video Output – HDMI Audio –  3.5mm Audio Out jack USB – 1x micro USB OTG, 2x USB 2.0 host ports Expansions and I/Os: UART –  4 x TTL UART LCD –  TFT LCD interface, support Capacitive/Resistive touch driver 2x Digital sensor input CMOS CAMERA Interface MIPI interface – Support HD […]

Review of Beelink A9 RK3188 Android Media Player

Beelink A9 is an Android TV Box powered by Rockchip RK3188 SoC with 2GB RAM, and 8GB RAM (See full specs). The hardware is pretty standard, but the company released Android 4.4 SDK for the device, so when Beelink / Nexteon told me they wanted to send me one for review, I accepted. I won’t test the Android SDK today, but I’ll just show the pictures of the device, and run my usual series of tests for review. The shipped sample is not running Android 4.4 (beta), but Android 4.2.2. Unboxing Pictures I’ve received this Android media player in the no brand package below. I’m not sure if Beelink will sell directly to individuals, so you’ll likely to received some different if you order Tronsmart A928 or Zero Devices Z6C which are based on the same platform. There are quite a few accessories in the package: The box itself, a […]

AllGo Embedded Systems Android IVI System Boots in 4 Seconds

We’ve already seen several sub-second boot times for embedded Linux systems with platforms such as Beagleboard (TI OMAP 3530) and an AllWinner A10 based device, but I had never seen fast boot optimization for Android before, or I just forgot… Typically Android boots within 20 to 40 seconds on most devices, but AllGo Embedded Systems has optimized Android Jelly Bean boot time for their IVI (In-Vehicle Infotainment) platform running a media player called RACE. Charbax interviewed then at CES 2014, where they demoed the 4 seconds (actually 4.2 seconds) boot on Texas Instruments OMAP5 from reset and power, as you can see in the video below. (The video starts at 2:20 to show the demo directly). Beside Texas Instrument OMAP5, the solution is also available for Freescale i.MX6. 0xlab did some boot time optimizations for Android dropping the boot time from 30 seconds to 15 seconds. AllGo Embedded Systems did […]

Getting Started with Raxda Rock – Building an Android 4.2 Image from Source

I’ve posted some pictures, and show some basics how to get started in my first post about Radxa Rock. Today, I’ll post my experience trying the instructions to build Android for Radxa Rock in Ubuntu 13.10. Many of the instructions are also valid for other RK3188 devices. The source code is currently located in a private git repository, and if you’re sure you want to get the Android source  code, you should send an e-mail to [email protected] to be granted access to their private repo. Within minutes, I’ve received an email with the subject “GitLab | Account was created for you” to register an account. You’ll then need to add an SSH key just like you’d do for Github. Assuming you’re already using a service like github, you should already have SSH key. Simply type cat ~/.ssh/id_rsa.pub, copy the output, and go to git.linux-rockchip.org/profile/keys, login if needed, and click on […]

Radxa Rock and ODROID-U3 Quad Core Development Boards Comparison

If you want a quad core development board for less than $100, you only have two choices right now: Radxa Rock powered by Rockchip RK3188, and Hardkernel ODROID-U3 powered by Samsung Exynos 4412 prime. There are also a few Freescale i.MX 6Q boards such as Wandboard Quad and UDOO Quad for around $130 which you could consider because of potentially better software support and features like SATA, but in this post, I’ll compare Radxa Rock and ODROID-U3 to help you decide which one may be right for your application or project. Let’s get right to the subject, with a side-by-side comparison table. Radxa Rock Hardkernel ODROID-U3 Comments Processor Rockchip RK3188 ARM Cortex-A9 quad core @ 1.6Ghz Samsung Exynos 4412 Prime quad core Cortex A9 @ 1.7 Ghz Slight advantage for ODROID-U3, but it’s basically a draw. GPU ARM Mali-400 MP4 GPU ARM Mali-400MP4 GPU @ 440MHz Same GPU, that’s a […]

Raxda Rock Development Board Unboxing, Quick Start Guide, and Benchmarks

Radxa Rock is an Android & Linux development board based on Rockchip RK3188 with 2GB RAM, 8GB NAND Flash, several I/Os that’s been available in beta version to a small number of developers in September 2013, with general availability starting at the very end of December 2013. Radxa team has sent me a board for me to try out. I’ll start with some unboxing pictures, write a Quick Start Guide for the first boot with Android 4.2.2, and run some benchmarks on the board. In another post, I’ll try some of the instructions to build Android and Ubuntu for the platform. Radxa Rock Unboxing Pictures & Video I’ve received the board in the following package via Fedex. Beside the board, we’ve got a Wi-Fi antenna, a USB power cable, and a plastic casing. Checkout Radxa Rock unboxing video below, if you want to find out exactly what’s you get when […]

NETGEAR NeoMediacast Android HDMI Dongle (NTV300D) Features Wi-Fi 802.11ac Module

NETGEAR has announced a new HDMI dongle called NeoMediacast, but also known as NTV300D model, running Android 4.2.2, with functionalities very similar to all the HDMI TV sticks / mini PCs originating from Chinese manufacturers we’ve seen for nearly 2 years. AFAIK, NETGEAR is the first relatively well-known global company to unveil an Android HDMI TV stick for the consumer market. [Update: see comments for details how it will reach the comsumer]Key features published for NTV300D by the company: Android 4.2+ supported with RDK support in the future 1080p/60 full HD, H.264/MPEG4 video decode Supports HDMI 1.4 and HDCP 2.1 Miracast-enabled Wi-Fi 802.11ac 1×1 AC 450 Mbps, Bluetooth 4.0 USB powered Micro SD slot for playback/storage Micro USB (OTG) for secondary storage Misc – Infrared Port, status LED DRM support for Microsoft PlayReady, Google Widevine and Adobe RTMPe Remote control unit – RF4CE or Bluetooth supported So there’s now information […]