automation News - Page 28 of 56 - CNX Software

April 28, 2020April 28, 2020 by Jean-Luc Aufranc (CNXSoft) - 13 Comments

Rockchip RK3588 8K TV Box Triples as 5G & WiFi 6 Router, Home Automation Gateway

Rockchip RK3588 octa-core Cortex-A76/A55 processor was only expected in the second half of 2020 for IoT and vision/AI applications, but at least one company is working on a 3-in-1 product based on Rockchip high-end processor with a “5G AIoT 8K TV box” that also works as a 5G and WiFi 6, and with features such as Zigbee can also act as a home automation gateway. “5G AIoT Android TV Box” preliminary specifications: Main SoC – Rockchip 3588 octa-core processor with 4x Cortex-A76 and 4x Cortex-A55 cores in dynamIQ configuration, Arm “Natt” GPU (i.e. NOT Mali-G31 MP2), NPU 2.0, 8K H.265/AV1 video decoder, 4K video encoder System Memory – 4GB DDR4 Storage – 32GB eMMC flash, MicroSD card slot up to 64GB?! Video Output – HDMI 2.1 up to 8K resolutions Audio – SPDIF audio output, HDMI audio Connectivity 802.11 b/g/n/ac/ax WiFi 6 and Bluetooth 5.1 via Qualcomm QCA6391 WiSoC 1x […]

April 27, 2020April 28, 2020 by Jean-Luc Aufranc (CNXSoft) - 11 Comments

$9 Ebyte E180-ZG120B-TB Zigbee 3.0 Evaluation Board Features Silicon Labs EFR32MG1B Zigbee/Thread SoC

Ebyte E180-ZG120B-TB is a Zigbee 3.0 evaluation/development board based on the company’s E180-ZG120B module itself powered by Silicon Labs EFR32MG1B Series 1 Zigbee/Thread Arm Cortex-M4 SoC. Ebyte E180-ZG120B-TB specifications: Zigbee Module – Ebyte E180-ZG120B powered by Silabs EFR32MG1B Arm Cortex-M4 @ 40 MHz with 256 KB flash, 32KB SRAM; IPEX antenna connector; dimensions: 18 x 11.5mm Connectivity 2.4GHz Zigbee 3.0 & Thread Tx Power: 18 to 20dBm Range up to 1.3 km USB – 1x Micro USB port for power and programming via CP2102G serial chip Expansion 2x 14-pin headers plus 9-pin header giving access to module I/Os including GPIO, UART, PWM, ADC, TouchLink, Wake, RESET, DBG, 3.3V, and GND 6-pin header for power, 1x UART for CP2102G, 1x UART for module; Fitted with 3 jumpers by default to connect both Tx/Rx, as well as 3.3V power pins. Removing the jumper should allow you to connect directly to the module, […]

April 27, 2020 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Banana Pi BPI-F2P Industrial Control Board Adds PoE, RS-232 and RS-485 Interfaces

At the end of Last year, we covered Banana Pi BPI-F2S Industrial SBC powered by Sunplus SP7021 “Plus1” SoC with four Cortex-A7 core, an Arm A926 microprocessor, an 8051 core, as well as 128MB to 512MB built-in DDR3 RAM. The company has now unveiled Banana Pi BPI-F2P with the same processor and many of the same features, but with the addition of PoE support on one of the Fast Ethernet ports, as well as an RS-232 DB9 connector, and RS-485 terminal blocks. The expansion connector for an FPGA board found in BPI-F2S is however gone. Banana Pi BPI-F2P specifications: SoC – Sunplus SP7021 “Plus1” with a quad-core Cortex-A7 processor @ 1.0 GHz, one Arm A926 microprocessor, an 8051 core to handle I/Os, and 128MB or 512MB DDR3 DRAM. Storage – 8GB eMMC flash, microSD card slot Video Output – HDMI 1.4 output Camera I/F – MIPI CSI connector Connectivity – […]

April 21, 2020 by Jean-Luc Aufranc (CNXSoft) - 8 Comments

TransferFi Wireless Power Network Lights Up Sensors up to 55 Meters Away

Wireless charging has been around for a while, and it usually placing a phone or other device on a charging pad. But back in 2018, Energous started to promote its near-field, mid-field, and far-field wireless charging solutions, with far-field meaning within a room. But so far, they only have released near-field devkits and products. Singapore based TransferFi Pte has come up with its own wireless charging solution. TranferFi wireless power network (TFi WPN) aims to power sensors up to 55 meters away and specifically targets building and factory automation in order to help companies save on installation and cabling costs. The solution works with a gateway powering up and receiving data from sensors wirelessly with a range of up to 55 meters. The TFi Gateway Max Turin-1 covers up to 32 TFi Sense devices via multichannel beamforming supporting up to 16 channels and can be connected to Modbus, BACnet & […]

April 16, 2020March 18, 2021 by Jean-Luc Aufranc (CNXSoft) - 16 Comments

Sonoff ZBBridge WiFi to Zigbee Gateway Launched for $16.90

Since the end of last year, ITEAD has introduced several Zigbee Sonoff products such as Sonoff Basic R3 Zigbee, but so far customers had to rely on third-party hardware for the gateway, and they very recently launched a CC2531 Zigbee USB dongle to ease the task. But now the company’s just-launched Sonoff ZBBridge WiFi to Zigbee gateway allows people to control compatible Zigbee devices using eWelink mobile app. Sonoff ZBBridge specifications: Wireless Connectivity – 2.4 GHz 802.11b/g/n WiFi 4 and Zigbee 3.0 Power Input – 5V/1A Dimensions – 62 x 62 x 20 mm (PC V0) Weight – 35 grams Temperature Range – -10 to 40°C The gateway is working with BASICZBR3 Smart Switch, S31 Lite zb Smart Plug, and the upcoming SNZB-01 Wireless Switch, SNZB-02 Temperature & humidity sensor, SNZB-03 motion sensor, and SNZB-04 wireless door/window sensor. It will also work with other smart devices certified by the ZigBee […]

March 31, 2020 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Kontron 3.5″-SBC-WLU Single Board Computer Takes CNVi M.2 WiFi Cards

We first found out about Intel CNVi (Connectivity Integration Architecture) for WiFi in a block diagram for Gemini Lake processors in 2017. CNVi integrates a WiFi MAC, Bluetooth MAC, and Baseband Modem into the processor, and connect over a CNVio interface to a separate CRF (Companion RF) module handling the RF part. This allows overall cost & power savings and reduction in size. AFAIK, all new Intel desktop and mobile processors come with a CNVi block, but somehow only a few SBC’s are made with M.2 slot compliant with CNVi WiFi cards. But Kontron 3.5″-SBC-WLU single board computer powered by an Intel Whiskey Lake processor is one of those and features an M.2 E-key slot that supports Intel Integrated Connectivity (CNVi) WiFi & Bluetooth modules. Kontron 3.5″-SBC-WLU specifications: SoC (one or the other) Intel Core i7-8665UE quad-core processor @ up to 4.4 GHz with 8MB cache, Intel UHD Graphics 620; […]

March 23, 2020March 23, 2020 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

$4 ITEAD CC2531 Zigbee USB Dongle Works with Zigbee2MQTT Out of the Box

Some of ITEAD Studio’s Sonoff home automation devices include Zigbee connectivity with for instance Sonoff BASICZBR3 smart switch or a version of Sonoff S31 smart socket with integrated Zigbee. Those devices usually work via a Zigbee enabled gateway that could be a router, Raspberry Pi SBC, or mini PC, which ITEAD did not offer so far. But to help people making their own Zigbee gateway the company is now selling a low-cost ($3.99) CC2531 USB dongle preloaded with CC2531ZNP-Prod firmware (Zigbee coordinator firmware), and compatible with Zigbee2MQTT open-source Zigbee to MQTT bridge once plugged into a PC, Raspberry Pi, or another Linux SBC. ITEAD CC2531 Zigbee USB dongle specifications: MCU – Texas Instruments CC2531F256 Zigbee and IEEE 802.15.4 wireless MCU with 8kB RAM, 256kB Flash pre-loaded with CC2531ZNP-Prod firmware for zigbee2mqtt application Host Interface – USB 2.0 male port Expansion – 8-pin unpopulated header with 8 I/Os Debugging – Debug […]

March 12, 2020March 12, 2020 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

AMD Ryzen Embedded based SBC-VR1000 SBC to Power Edge Computing & Graphics Applications

We just wrote about a 3.5″ Ryzen Embedded SBC a few days ago, namely SECO SBC-C90 single board computer, after mentioning there were few such AMD options in the 3.5-inch form factor with the only other board we covered so far being IBase IB918. But there’s now at least a third option with Kontron introducing SBC-VR1000 3.5-inch board powered by AMD Ryzen Embedded V1000-series or R1000-series processor, and designed for “intensive edge computing and graphics applications” including digital signage, digital casino gaming, kiosk, retail, banking, education, medical imaging, as well as industrial control and automation. Kontron SBC-VR1000 specifications: SoC (one or the other) AMD Ryzen V1605B quad-core processor @ up to 3.60 GHz with 4M cache, AMD Radeon Vega 8 GPU; 15 W TDP AMD Ryzen V1202B dual-core processor @ up to 3.20 GHz with 4MB cache, AMD Radeon Vega 3 GPU; 15 W TDP AMD Ryzen R1606G dual-core processor […]