automation News - Page 37 of 56 - CNX Software

March 7, 2018January 30, 2022 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

WAGO PFC200 PLC Runs Embedded Linux, Supports Web and Mobile Visualization

WAGO is an international company with headquarters in Germany, designing electrical devices and automation systems. One of their latest product is WAGO PFC200 (PFC – Programmable Field Controller) designed for IIoT applications and running embedded Linux on an Arm Cortex A8 processor. WAGO PFC200 PLC key specifications & features: SoC – Arm Cortex A8 processor @ 600 MHz (CNXSoft: possibly Texas Instruments Sitara AM335x processor) System Memory – 256 MB RAM Storage – 256MB flash, SD card slot up to 32GB Fieldbus ports – 2x Ethernet; MODBUS, TCP/UD/RTU, CAN port, PROFIBUS Slave, Smart Grid and Serial RS-232/RS-485 Support for over 400 digital, analog, and specialty I/O modules Temperature Range – 0 to 50°C or -20 to 60°C depending on model All models support Modbus over TCP/UDP via their Ethernet port, but other Fieldbus ports are optional and depend on the exact model. The PLCs also come with a built-in Web […]

March 4, 2018March 4, 2018 by Karl Johnson - 14 Comments

Sonoff S31 Smart Socket Review – Power Consumption Monitoring with eWelink Android App

Today we are looking at the Sonoff S31. It is another device in the Sonoff line by ITEAD Studio. Similar to the Sonoff POW, you can see power usage but on the S31 you can keep historical data up to 100 days. This time around I am using it with the standard firmware, and will not be flashing the popular MQTT Tasmota firmware. Specifications per ITEAD website: Max. Current: 16A Voltage Input: 90~264V AC, 50/60HZ Wireless Standard: 2.4GHz, 802.11 b/g/n Receive Sensitivity: 802.11b: <-84dBm(11Mbps); 802.11g: <-68dBm(54Mbps) Output Power: 802.11b:16±2dBm; 802.11g:13±2dBm Security Mechanism: WEP/WPA-PSK/WPA2-PSK Encryption: AES/TKIP Working Temp: -20 °C ~ 75 °C Working Humidity: 10%-80% Product Dimensions: 75.7×39.7x32mm Gang: 1 Weight: 135g Certification: FCC (Download) Sonoff S31 Unboxing & Teardown Taking the S31 apart is rather easy but I did not take it fully apart for fear of breaking it. Just pop the power button off the left side. Then […]

February 19, 2018 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Low Cost Renesas Target Boards for RX MCUs are Designed for Home Appliances, Building & Industrial Automation

Renesas Electronics has announced three new Target Boards for the RX65N, RX130 and RX231 32-bit Microcontroller (MCU) groups designed for home appliance, building and industrial automation applications. Each board has minimal features with an on-chip debugger, a mini USB port, the micro-controller, and through-hole pin headers providing access to all MCU signals. This design allows to access all MCU features while keeping the price below $30. Renesas Target Board specifications: MCU Renesas RX65N (R5F565NEDDFP) 32-bit RXv2 MCU @ 120 MHz with 2MB+32KB ROM, 640KB RAM Renesas RX130 (R5F51308ADFP) 32-bit MCU @ 32 MHz with 512KB+8KB ROM, 48 KB RAM Renesas RX231 (R5F52318ADFP) 32-bit RXv2 MCU @ 54 MHz with 512KB+8KB ROM, 64 KB RAM Expansion Unpopulated 12-pin Pmod connector 2x unpopulated 50-pin MCU headers Misc 2-pin Current measurement header Reset and user push buttons Power LED (Green), ACT LED (Green), 2x user LEDs (Green) 2-pin emulator reset header Power Supply […]

February 16, 2018 by Jean-Luc Aufranc (CNXSoft) - 8 Comments

Wibeee Power Monitoring Device Plugs right into Your Home’s Circuit Breaker Box

We’ve covered several smart plugs or switches capable of monitoring electricity consumption and displaying results right in a smarphone app, or computer’s web browser with products such as Sonoff S31 or Broadlink SP2 WiFi smart sockets, or Sonoff POW switch. Those work for individual plugs, but if you want to cover your full house, you’d need several of those, and in some case it may not be so convenient as no plugs may be available for example for lights or air conditioner. Smilics Technologies has come up with an easier method, although less granular, thanks to their WIBEEE device that clips to your fuse / circuit breaker box using DINZERO “clip-on” technology, and available in single and three phase models. Main features: Voltage Range – 85 to 265 V AC @ 50 ~ 60 Hz with 2% accuracy + variation in range of use depending on temperature, humidity, etc… Current […]

February 13, 2018 by Jean-Luc Aufranc (CNXSoft) - No Comments

BASpi I/O is a Raspberry Pi HAT Expansion Board for Building Automation (BACNet)

BACNet is a data communication protocol for Building Automation and Control Networks that has been developed, supported and maintained by ASHRAE (American Society of Heating, Refrigerating and Air-Conditioning Engineers) Standing Standard Project Committee since 1987, and used as building automation standard in the US, Europe, and more than 30 other countries. It’s used for HVACs, lightings, elevators, fire safety, and other systems used in buildings. It’s also known as ISO 16484-6 standard. I had never heard of it, but this afternoon, I’ve come across Contemporary Controls BASPi I/O, a Raspberry Pi add-on specifically designed for BACNet, and providing 12 physical I/O points including 6 Universal Inputs and 6 Relay Outputs. BASPi I/O specifications and features: BACnet/IP Server – 12 physical points and 24 virtual points BACnet/IP over Ethernet or Wi-Fi Resident Sedona Virtual Machine (SVM) Input/Output — 12-points of physical I/O 6x configurable Universal Inputs: Analog Input, Binary Input, Resistance, […]

January 26, 2018 by Jean-Luc Aufranc (CNXSoft) - 16 Comments

AAEON RICO-3399 Pico-ITX Board is Powered by Rockchip RK3399 / OP1 Processor

We now have a fair amount of boards powered by Rockchip RK3399 hexa-core processor with Firefly-RK3399, Rockchip Sapphire, VideoStrong VS-RD-RK3399, the upcoming 96boards compliant Rock960, among others. But AFAIK, none of those are designed to fit in a standard enclosure. AAEON will soon change that with an update of their RICO-3288 pico-ITX board, called RICO-RK3399 featuring Rockchip OP1/RK3399 processor combined with 2GB RAM, 16GB eMMC flash, HDMI 2.0, Gigabit Ethernet and more. AAEON RICO-3399 specifications: SoC – Rockchip RK3399 (OP1) hexa-core processor with two Cortex A72 cores up to 1.8 GHz, four Cortex A53 cores, and an Arm Mali-T860MP4 GPU System Memory – 2GB LPDDR3 Storage – 16GB eMMC flash, micro SD card slot Video Output / Display HDMI 2.0 port up to 4K UHD @ 60Hz eDP connector for LCD display up to 4K UHD @ 60 Hz I2C/USB header for touch panel Audio – Via HDMI, 2.5W (by 4Ω) speaker/ […]

January 22, 2018March 13, 2020 by Jean-Luc Aufranc (CNXSoft) - 13 Comments

Xiaomi Sherlock M1 Allows You to Unlock Your Door with Your Smartphone

Xiaomi has recently launched a new product from their MiJia (My Home) family with Sherlock M1 smart lock, which you can stick to the inside part of your security lock, insert the key, and then control it with your smartphone using Xiaomi app. Sherlock M1 key features and specifications: Compatible with both right and left opening doors Connectivity – Bluetooth 4.0 LE USB – 1x micro USB port for charging Battery – Rechargeable 3800mAh battery Dimensions – 12.80 x 6.20 x 7.35 cm Weight – 430 grams The lock ships with some specification / user guide? in English. The video below shows a bit more about the installation steps. The main benefit of such smart lock is that you can share virtual keys with other people living in the household, so no more lost keys. Of course, you’d have to trust this cannot be easily hacked. This “user manual” provides […]

January 21, 2018June 18, 2018 by Jean-Luc Aufranc (CNXSoft) - No Comments

Getting Started with ANAVI Light pHat Starter Kit with RGB LED Strip, Light Sensor

ANAVI Light pHAT is an expansion board best suited for Raspberry Pi Zero (W/WH) boards, but also working with any other Raspberry Pi boards with a 40-pin header, that can control a 12V RGB LED strip and sensors. The project’s crowdfunding has just been successfully completed on CrowdSupply with 82 pledges, but you can still pre-order the board or kits for $25 and up. The developer – Leon ANAVI – had sent me a starter kit a little while ago, and this week-end I had time to test the basic functionalities of the board. The package includes the pHAT board itself, a one meter RGB LED strip, an I2C sensor, and some stickers. The sensor is based on BH1750 ambient light intensity sensor. The light pHAT boards include a 4-pin 12V/RGB blue terminal, EEPROM, three I2C connecter, a 3.3V UART connector to access the serial console for debugging / running […]