beaglebone News - Page 6 of 13 - CNX Software

March 10, 2016March 10, 2016 by Jean-Luc Aufranc (CNXSoft) - 14 Comments

BeagleBone Enhanced Adds Gigabit Ethernet, More Memory & USB Ports, and Sensors (Crowdfunding)

It’s nice to see BeagleBone Black‘s open source hardware being leveraged by third parties, as we’ve already seen designs such as BeagleBone Green and BeagleBone Black Industrial 4G in the past, and now UK based SanCloud has decided to launch BeagleBone Enhanced on Indiegogo (flexible funding). BeagleBone Enhanced board specifications with bold highlights showing improvements over the BeagleBone Black Rev. C: SoC – Texas Instruments Sitara AM3358 Cortex A8 @ 1 GHz + PowerVR SGX530 GPU System Memory – 1GB DDR3 RAM @ 800 MHz Storage – 4GB eMMC flash + micro SD slot, optional 1MB SPI NOR flash USB – 2x USB 2.0 host port (A type), mini USB OTG port, 2x USB interfaces via expansion header Serial Port – UART0 via 3.3V TTL header Ethernet – Gigabit Ethernet Video Output – micro HDMI with EDID support, up to 1280×1024 resolution. Audio Output – Via HDMI Sensors Optional 6 […]

February 12, 2016February 18, 2016 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

Two Contests for Makers with BeagleBone Green (ARM) and Creator CI20 (MIPS) Boards

I’ve noticed Hackster hardware community has helped organizing several challenges for makers, and the most two recent one are sponsored by Imagination Technologies with their Creator CI20 MIPS board, and SeeedStudio and Beagleboard.org with BeagleBone Green board. “Terminate the competition with Creator Ci20!” That’s the title for Imagination Technologies contest, who basically wants you to create our robot overloads using their MIPS board, or at least design a Terminator inspired robot or hack using the board. You’ll need to submit your idea by March 4, 2016, and the company will give 50 Creator Ci20 to the best 50 ideas, aftwer which you have until April 29, 2016 to complete your project, and write about it on Hackster with photos, code and schematics. Three winners will be selected by May 6, 2016 to get one of the three prizes: 1st place (worth $400) – A bag of Imagination-powered goodies, including a Meizu […]

February 1, 2016 by Jean-Luc Aufranc (CNXSoft) - No Comments

BayLibre ACME Cape for BeagleBone Black Measures Power and Temperature with Sigrok

Sigrok open source signal analysis software suite had a major release last week-end with libsigrok 0.4.0, libsigrokdecode 0.4.0, sigrok-cli 0.6.0, and PulseView 0.3.0. The new version added numerous bug fixes for supported hardware such as UNI-T UT61E digital multimeter or USBee AX Pro logic analyzer, and added support for several logic analyzers, oscilloscopes, multimeters, programmable power supplies, an electronic load, an LCR meter, a scale, and one BeagleBone Black cape, namely BayLibre ACME. The ACME initiative was launched in order to get rid of the limitations of proprietary solutions, and provide an open source hardware and software multi-channel power and temperature measurements solution to the community. BayLibre ACME cape supports up to 8 probes to measure VBUS (0 to +36V), VSHUNT ( 2.5uV up to 81.92mV), CURRENT AND POWER. Three current / power probes have been developed with all featuring TI INA226 for the ADC conversion: ACME HE10 Power Probe […]

January 28, 2016January 28, 2016 by Jean-Luc Aufranc (CNXSoft) - 11 Comments

BeagleBone Black Industrial 4G is Red, and Offers an Extended Temperature Range

BeagleBone Black is a great little board for hobbyists with plenty of I/Os, and decent software support, but the development board has not been designed to be used in low or high temperatures as found in some industrial settings, so Element14 has designed BeagleBone Black Industrial 4G with the same specifications as BeagleBone Black Rev C, but a red PCB, support for an extended temperature range between -20 and +85°C, and additional board protection with a conformal coating. BeagleBone Black Industrial 4G Specifications: SoC – Texas Instruments Sitara AM3358BZCZA10 Cortex A8 @ 1 GHz + PowerVR SGX530 GPU System Memory – 512 MB DDR3L @ 800 MHz Storage – 4GB eMMC + micro SD slot Video Out/Display I/F – HDMI and LCD interfaces Connectivity – 10/100M Ethernet (RJ45) Serial Port – UART0 access via 6 pin 3.3V TTL Header. Header is populated USB – USB 2.0 Client port: Access to […]

January 13, 2016January 13, 2016 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

BeagleBone Blue Board is Designed for Robots and UAVs

Beagleboard.org organization already tried to go Blue with BeagleBone BlueSteel-Basic that was supposed to a the single board computer to be used by OEM to integrate into their design instead of BeagleBone Black development board. For some unknown reasons this never happened, but they’ve now reused the color to introduce BeagleBone Blue board designed for robotics and UAVs. BeagleBone Blue specifications: SoC – Texas Instruments Sitara AM3358 Cortex A8 @ 1 GHz + PowerVR SGX530 GPU System Memory – 512 MB DDR3 Storage – 4 GB 8-bit on-board flash storage Connectivity – 802.11 b/g/n, Bluetooth 4.0 LE USB – USB 2.0 client and host Motor Control – 8x 6V servo out, 4x DC motor out, 4x quad enc in Sensors – 9 axis IMU, barometer “Easy connect Interfaces” – GPS, DSM2 radio, UARTs, SPI, I2C, analog, buttons, LEDs Power / Battery – 2-cell LiPo support with balancing, 6-16V charger input […]

August 12, 2015August 12, 2015 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

$39 Beaglebone Green Loses HDMI and DC Jack, Gains Grove Connectors

The original BeagleBone launched in 2011 $89, then Beagleboard.org released an updated version with HDMI, a faster processor, and more RAM called BeagleBone Black for $45 in 2013, possibly as a competitor to the Raspberry Pi, and since then the price has bumped up to $55 because of a larger eMMC flash. There’s now a new version – and a different color – with BeagleBone Green selling for $39 on SeeedStudio with shipping starting on August 20, 2015. BeagleBone Green board specifications: SoC – Texas Instruments Sitara AM3358BZCZ100 Cortex A8 @ 1 GHz with NEON + PowerVR SGX530 GPU System Memory – 512 MB DDR3L @ 800 MHz Storage – 4GB eMMC + micro SD slot USB Access to USB0, Client mode via Micro USB Access to USB1, Type A Socket, 500mA LS/FS/HS Serial Port – UART0 via 6-pin 3.3V TTL header (populated) Ethernet – 10/100M Ethernet , RJ45 Expansion […]

June 9, 2015 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

Free Electrons Releases Buildroot Training Materials

Free Electrons develops embedded Linux & Android software, and also provides related training. On-site training sessions are scheduled from time to time, or organized on request, and they usually release their training materials for free, as they did for their Embedded Linux training in 2012, or their Yocto Project / OpenEmbedded course more recently. Thomas Petazzoni, Free Electrons’ Chief Technical Officer, recently informed me that the company also released training materials for Buildroot, which like the Yocto Project is a build system, but it had been around for much longer, and the company is actively participating in its development with over 2,800 patches submitted upstream over the years. Four main resources have been released for the course, under a Creative Commons BY-SA license: training materials for Buildroot – 325 pages Practical labs instructions (PDF) with BeagleBone Black – 32 pages Practical labs data (.tar.xz) – Patchsets for drivers, rootfs, and […]

April 24, 2015 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

Ubuntu 15.04 Released for PCs, Servers, IoT Gateways, the Cloud, and Phones

The road to convergence is a long one, and although you still can’t really use a smartphone as both a phone and your desktop computers, Ubuntu 15.04 “Vivid Vervet” releases brings us closer to this goal, as the Linux based operating systems now supports not only the traditional PCs and servers, but also the Cloud and IoT platforms thanks to Ubuntu Snappy, and phones such as BQ Aquarius E4.5 Ubuntu Edition. Most changes for Desktop users are under the hood with Upstart replaced by systemd, the Linux kernel is now up to version 3.19, and many packages have been upgraded to a newer version. You can download i386 (32-bit x86) and amd64 (64-bit x86) desktop or server ISO images, and for the first time Ubuntu Snappy for generic amd64 platform, as well as an ARMHF image made for BeagleBone Black, which AFAIK is the very first time Ubuntu formally releases […]