camera

Posted on by Jean-Luc Aufranc (CNXSoft) - No Comments on Vizy AI camera runs Tensorflow, OpenCV, PyTorch on Raspberry Pi 4 (Crowdfunding)

Vizy AI camera runs Tensorflow, OpenCV, PyTorch on Raspberry Pi 4 (Crowdfunding)

Vizy AI Camera

We previously covered Charmed Labs PIXY2 computer vision camera based on an NXP LPC4330 microcontrollers that worked with Arduino, Raspberry Pi, and other development boards. The company is now back with a fully integrated more powerful solution with Vizy AI camera featuring a Raspberry Pi 4 SBC with up to 8GB RAM. Vizy AI camera key features and specifications: SBC – Raspberry Pi 4 with Broadcom BCM2711 quad-core Arm Cortex-72 processor, up to 8 GB RAM Camera – High-resolution camera based on Sony iMX477 12.3 MP sensor that can capture at over 300 frames/second and support both daytime and nighttime viewing; Both M12 and C/CS lenses are supported Video Output – 2x micro HDMI ports Audio – Analog stereo audio port Networking – Gigabit Ethernet, dual-band WiFi 5, and Bluetooth 5.0 USB – 2x USB 3.0 ports, 2x USB 2.0, 1x USB Type-C port from Raspberry Pi 4 (But not […]

Posted on by Jean-Luc Aufranc (CNXSoft) - No Comments on Lantronix Open-Q 865XR SoM Brings Snapdragon XR2 Processor Beyond Virtual Reality

Lantronix Open-Q 865XR SoM Brings Snapdragon XR2 Processor Beyond Virtual Reality

Lantronix Snapdragon XR2 Development Kit

Qualcomm Snapdragon XR2 (SXR2130P) is the latest and most powerful virtual & extended reality processor from the company and Facebook recently announced it would be found in their Oculus Quest 2 standalone VR headset. But it now looks like the processor will be used well beyond virtual reality applications as Lantronix has unveiled a Snapdragon XR2 SoM with Open-Q 865XR system-on-module designed for AI boxes, video conference systems, multi-camera systems, machine vision platforms, advanced high-resolution multi-display systems, medical imaging, and handheld data collectors. Open-Q 865XR SoM Open-Q 865XR SoM specifications: SoC – Qualcomm SXR2130P (Snapdragon XR2) Octa-core processor with 1x Kryo Gold prime @ 2.84 GHz + 3x Kryo Gold @ 2.42 GHz + 4x Kryo Silver @ 1.81 GHz Adreno 650 GPU @ up to 587 MHz Hexagon 698 DSP with quad Hexagon Vector eXtensions Spectra 480 Image Signal Processor Adreno 665 Video Processing unit for decode up to […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 7 Comments on Allwinner T5 Processor to Power Android 10 and Linux Multi-Camera Infotainment Systems

Allwinner T5 Processor to Power Android 10 and Linux Multi-Camera Infotainment Systems

Allwinner T5

Allwinner T-series processors are designed for transportation applications such as automotive infotainment systems, smart rear-view mirrors, and navigation systems. The Zhuhai-based company has now added a new T-series processor to its website with Allwinner T5 processor featuring four Cortex-A53 cores and a Mali-G31 MP2 GPU that’s a nice upgrade to the Mali-400 MP2/4 GPUs used in their other automotive processors. Allwinner T5 specifications: CPU – Quad-core Arm [email protected] GPU – Arm Mali G31 MP2 with support for OpenGL ES 3.2/2.0/1.0, Vulkan 1.1, OpenCL 2.0 Memory I/F – 32-bit DDR4/DDR3/DDR3L/LPDDR3/LPDDR4 interface up to 4GB Storage I/F SD3.0/eMMC5.0 interface 8-bit Nand flash interface with maximum 80-bit/1KB ECC Video Engine Video decoder H.265 MP decoder up to 4K @ 60fps H.264 BL/MP/HP decoder up to 4K @ 30fps VP9 decoder up to 4K @ 60fps AVS2 decoder up to 4K @ 60fps Multi-format 1080p60 video playback including VP8, MPEG1/2 SP/MP, MPEG4 SP/ASP, AVS+/AVS […]

Posted on by Jean-Luc Aufranc (CNXSoft) - No Comments on IP67 Rugged GMSL2 Camera Works with NVIDIA Jetson Devkits

IP67 Rugged GMSL2 Camera Works with NVIDIA Jetson Devkits

IP67 Rugged Camera for Nvidia Jetson

e-con Systems has launched an industrial-grade GMSL2 Full HD camera and a deserializer interface board for NVIDIA Jetson AGX Xavier / TX2 Developer Kits. The STURDeCAM20 camera is waterproof with an IP67 rating and ships with a 15-meter coaxial cable with a FAKRA connector, while STURDeCAM20_CUXVR camera kit adds a GMSL deserializer board supporting up to 6 STURDeCAM20 cameras. STURDeCAM20 camera specifications: 2MP camera module with S-mount lens holder Gigabit Multimedia Serial Link 2 (GMSL2) interface with IP67 certified FAKRA connector On-board ISP High Dynamic Range (HDR) and Uncompressed UYVY streaming support Supported resolutions & frame rates VGA (640 x 480) @ 60 fps QHD (960 x 540) @ 58 fps HD (1280 X 720) @ 45 fps 960p (1280 x 960) @ 34 fps FHD (1920 x 1080) @ 30 fps Supply Voltage – 5 to 15V with +/- 5% tolerance Dimensions – 42 x 42 mm (aluminium enclosure) […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 9 Comments on VIA Pixetto Hi3518E V300 HD Camera Board Targets Artificial Intelligence and Machine Learning Education

VIA Pixetto Hi3518E V300 HD Camera Board Targets Artificial Intelligence and Machine Learning Education

VIA Pixetto HD Camera Board AI Education

VIA Technologies has launched the VIA Pixetto vision sensor aims to teach artificial intelligence (AI) and machine learning (ML) to students aged twelve and above. The Linux board features an Hisilicon Hi3518E V300 Cortex-A7 HD camera SoC combined with 64MB RAM, 128MB SPI flash, a MicroSD slot, as well as GalaxyCore GC2053 2M CMOS sensor offering 1920 x 1080 resolution and a 130° field of view. VIA Pixetto hardware specifications: SoC – Hisilicon Hi3518E V300 Cortex-A7 HD camera SoC @ 900 MHz with H.264, H.265, MJPEG/JPEG encoder System Memory – 64MB DDR, MicroSD card slot Storage – 128MB SPI flash Camera – GalaxyCore GC2053 2M CMOS sensor with 1920 x 1080 resolution,  130° FoV Audio – Microphone USB – 1x Micro USB 2.0 port Connectivity – WiFi 4 via Hisilicon Hi1131 low-power Wi-Fi chip  and ceramic antenna Expansion – Grove connector Misc – 3x LEDs (Power, OS boot, active status), […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 2 Comments on The Notch is Gone! ZTE Axon 20 5G Smartphone Features an Under-Display Camera

The Notch is Gone! ZTE Axon 20 5G Smartphone Features an Under-Display Camera

ZTE Axon 20 5G Under-Display-Camera Smartphone

A little over a few ago, we reported companies like Xiaomi and Oppo were working on under-display cameras to remove the notch on smartphones. This works by having the phone display a black bar (that means transparent) above the camera while taking a photo, and reverting to normal display once the photo is taken or video is shot. At the time, picture quality left to be desired, so more work was needed, but the first phone with an under-display camera is now available for ZTE Axon 20 5G selling for 2,198 RMB (~$322) and up in China. ZTE Axon 20 5G specifications: SoC – Qualcomm Snapdragon 765G octa-core processor with 1x Kryo 475 Prime (Cortex-A76 class) @ 2.4GHz, 1x Kryo 475 Gold (Cortex-A76 class) @ 2.2GHz, 6x Kryo 475 Silver (Cortex-A55 class) @ 1.8GHz System Memory – 6 or 8GB RAM Storage – 128GB or 256GB flash MicroSD card slot […]

Posted on by Jean-Luc Aufranc (CNXSoft) - No Comments on RISC-V & ESP32 based TTGO Handheld T-WATCH K210 AIoT DevKit Works with a 9V Battery

RISC-V & ESP32 based TTGO Handheld T-WATCH K210 AIoT DevKit Works with a 9V Battery

TTGO Handheld T-WATCH-K210 RISC-V & ESP32 Devkit

LilyGO TTGO T-Watch K210 AIOT is a rather thick watch development kit based on Kendryte K210 RISC-V AI Processor and ESP32 WiSoC capable of performing AI workloads such as face detection using a USB power source. We first covered the development kit in June, and the company releases some small variants from time to time with the latest being TTGO Handheld T-Watch K210 with basically the same hardware, plus the addition of a handle that adds a power button, and a compartment for a 9V battery to power the watch/devkit. TTGO Handheld T-Watch K210 specifications: SoC – Kendryte K210 dual-core 64-bit RISC-V processor with 8MB RAM, AI accelerators Storage – 16MB flash, MicroSD card slot Display – 1.54-inch capacitive touch IPS screen connected over an 8080 interface Camera – Adjustable 2MP OV2640 sensor with 65-degree lens (optional 120-degree angle lens),  AS312 “human” infrared sensor Connectivity – 2.4 GHz 802.11b/g/n WiFi […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 9 Comments on WCH CH569 RISC-V SoC Offers USB 3.0, Gigabit Ethernet, High-Speed SERDES & HSPI Interfaces

WCH CH569 RISC-V SoC Offers USB 3.0, Gigabit Ethernet, High-Speed SERDES & HSPI Interfaces

CH569 RISC-V SoC

RISC-V open architecture has made its way into low-cost low power general purpose MCUs such as Gigadevices GD32V or WCH CH32V103, Western Digital hard drives, some AI processors notably Kendryte K210, and even Linux capable boards including Microsemi’s PolarFire SoC Icicle kit. But more applications featuring RISC-V architecture are coming with, for instance, WCH CH569 RISC-V processor featuring USB 3.0, Gigabit Ethernet, DVP camera, and 1.25 SERDES block all managed by a RISC-V core clocked at 120 MHz. CH569 (and CH565) processor key features and specifications: CPU – RISC-V (RISC-V3A) core @ 120MHz with hardware multiplication and division, programmable interrupt controller, low-power two-stage pipeline Memory – 16KB 32-bit SRAM, 32/64/96KB configurable 128-bit SRAM Storage Internal – 448KB code flash, 32KB data flash External – SD/eMMC controller with single-wire, 4-wire, 8-wire data communication mode. Complies with eMMC card 4.4 and 4.5.1 specifications, and compatible with 5.0 specifications Networking – Gigabit Ethernet […]

UP 7000 x86 SBC