development board

Posted on by Jean-Luc Aufranc (CNXSoft) - 37 Comments on $10 Smartphone Display Released for Orange Pi 2G-IoT Board

$10 Smartphone Display Released for Orange Pi 2G-IoT Board

Orange Pi 2G-IoT is a low cost ARM Linux board with 2G, and WiFi & Bluetooth connectivity, basically with the guts of a smartphone minus the display and battery. Shenzhen Xunlong has now released a 800×480 display with capacitive touch support for the board available in black or white, and selling for $9.98 plus shipping. The board is too thick to make a smartphone out of it, but it reminds of the very expensive Qualcomm MDP’s (Mobile Development Platform), so Android app developers may find some use to test their apps on lower end hardware.  It could also be used for control panels that do not need to be very thin. Orange Pi 2G-IoT display specifications: 3.5″ TFT Display with 800×480 resolution Capacitive touchscreen Case with the Back, Home, and Recent buttons Dimensions – With case: 57.14 x 96.85 x 2.0 mm; Display only: 51.84 x 86.4mm Software support is […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 6 Comments on $89 MiniZed Development Board based on Xilinx Zynq Z-7007S SoC Includes WiFi, Bluetooth, Arduino Headers

$89 MiniZed Development Board based on Xilinx Zynq Z-7007S SoC Includes WiFi, Bluetooth, Arduino Headers

Avnet has unveiled MiniZed development board – part of ZedBoard family – powered by a Xilinx Zynq Z-7007s SoC with an ARM Cortex A9 processor and FPGA fabric,  supporting WiFi and Bluetooth connectivity, and equipped with Arduino and PMOD headers. MiniZed board (AES-MINIZED-7Z007-G) specifications: SoC – Xilinx Zynq-7007S single ARM Cortex A9 processor up to 677 MHz + FPGA with 23K logic cells, 1.8 Mb block RAM, 60 DSP slices System Memory – 512 MB DDR3L Storage –  8 GB eMMC flash, 128 Mbit QSPI flash Connectivity –  Wi-Fi 802.11b/g/n and Bluetooth 4.1 plus EDR and BLE  via Murata “Type 1DX” wireless module USB – 1x USB 2.0 host port Sensors – 3-axis accelerator and temperature sensor (LIS2DS12);  Digital Microphone (MP34DT05) Expansion Interfaces: 2x Pmod compatible connectors with 16x GPIOs Arduino UNO R3 compatible header with 22x GPIOs Debugging –  JTAG and serial console via micro USB port Misc – 2x […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 38 Comments on Micro SD Cards for Development Boards – Classes, Tools, Benchmarks, Reliability, and Tips & Tricks

Micro SD Cards for Development Boards – Classes, Tools, Benchmarks, Reliability, and Tips & Tricks

When people plan to use a development board for their project, they mainly focus on the requirements of the development board itself, as well as software support. But selecting the right accessories may be just as crucial for good performance and stability. For example, selecting a proper power supply is important, as the board may freeze or randmly rebooted if it is not feed at the right voltage. Part of this is selecting a micro USB cable, as you’ll want a cable with minimal resistance which can be achieved through shorter cables and/or a low AWG value. Another important item that can impact stability and performance of the systems are micro SD cards when used to run the operating system in development boards. Understanding SD Card Performance Metrics & Classes Until a few years ago, (Micro) SD cards were primary used to store data such as photos, videos and music. […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 8 Comments on Texas Instruments Announces AMIC110 Sitara Industrial Communication Processor & Development Board

Texas Instruments Announces AMIC110 Sitara Industrial Communication Processor & Development Board

Texas Instruments Sitara AM335x SoCs integrate an ARM Cortex A8 processor @ up to 1GHz with a PRU-ICSS for industrial communication, but also include a display controller, an optional PowerVR GPU, and a rich-set of peripherals making it useful for a wide range of applications. The company has now launched AMIC110 Sitara processor with a Cortex A8 core @ 300 MHz, and a PRU-ICSS specifically designed for industrial Ethernet, and fieldbus communication. Texas Instruments AMIC110 Sitara processor key features and specifications: CPU – ARM Cortex-A8 processor @ up to 300 MHz with NEON, 32+32KB I/D cache, 256KB L2 cache, 176KB boot ROM, 64KB RAM External Memory Interfaces (EMIF) – mDDR(LPDDR), DDR2, DDR3, DDR3L Controller up to 1GB General-Purpose Memory Controller (GPMC) – 8-bit & 16-bit Asynchronous Memory Interface with up to Seven Chip Selects (NAND, NOR, Muxed-NOR, SRAM) 2x programmable Real-Time Unit Subsystem and Industrial Communication Subsystem (PRU-ICSS) supporting  EtherCAT, […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 85 Comments on ROCK64 is a Rockchip RK3328 Development Board with Up to 4GB RAM, 4K HDR, Gigabit Ethernet, and USB 3.0

ROCK64 is a Rockchip RK3328 Development Board with Up to 4GB RAM, 4K HDR, Gigabit Ethernet, and USB 3.0

Rockchip RK3328 Android TV boxes such as A5X Plus or A95X R2 have been on the market for a couple of months, but since the processor is rather inexpensive, yet supports 4K UHD video output, Gigabit Ethernet and USB 3.0 interfaces, Pine64 has decided to create a new development board called ROCK64 with a form factor similar to Raspberry Pi 3 board. ROCK64 board specifications: SoC – Rockchip RK3328 quad core Cortex A53 processor with ARM Mali-450MP2 GPU System Memory – 1, 2, or 4 GB LPDDR3 @ 1866 MHz Storage – eMMC flash module socket + micro SD card slot + 128 Mbit SPI flash Video & Audio Output – HDMI 2.0a up to 4K @ 60 Hz with HDR10 and HLG support, 3.5mm AV port (composite video + stereo audio) Video Codec – 4K VP9, H.265 and H.264, 1080p VC-1, MPEG-1/2/4, VP6/8 Connectivity – Gigabit Ethernet USB – […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 1 Comment on Love to Code Board is Designed to Teach Coding via Paper Circuits, MakeCode Visual Programming Editor

Love to Code Board is Designed to Teach Coding via Paper Circuits, MakeCode Visual Programming Editor

Chibitronics has launched “Love to Code” board to enable beginners to try out programming without having to install software. The tiny board comes with a clip that designed for “paper circuits”, and can be programmed with either Microsoft MakeCode editor for visual programming, or the company’s online editor inspired from Arduino IDE. Love to Code board hardware (tentative) specifications: MCU – NXP Kinetis KL02 ARM Cortex M0+ @ 48 MHz with 32KB flash, 4KB RAM USB – 1x micro USB port used to power and program the board over a Y cable with micro USB and an audio jack to be connected to your smartphone as shown below) Expansion – 4x through holes for TXT, +5V, GND, and RGB, 6x programmable ports on clip to drive LED stickers, or used as switch / sensor inputs. Misc – Programming button, RGB LED The way it works is that you can first […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 1 Comment on Intrinsyc Open-Q 835 Development Kit Features Qualcomm Snapdragon 835 Processor, Support Android 7 and Windows 10

Intrinsyc Open-Q 835 Development Kit Features Qualcomm Snapdragon 835 Processor, Support Android 7 and Windows 10

Intrinsyc has just launched one of the first development boards powered by Qualcomm Snapdragon 835 processor with their Open-Q 835 devkit equipped with 4GB LPDDR4x, 128GB UFS 2.1 flash, 802.11ad WiFi, dual camera support and more. Open-Q 835 development kit is comprised of a “processor board” and a baseboard with the following specifications: Processor Board SoC – Qualcomm Snapdragon 835 (APQ8098) octa-core processor with four high performance Kryo 280 cores @ 2.20 GHz/ 2.30 GHz (single core operation), four low power Kryo cores @ 1.9 GHz, Adreno 540 GPUwith  OpenGL ES 3.2, OpenCL 2.0 Full support, and Hexagon 682 DSP with Hexagon Vector eXtensions (dual-HVX512) System Memory – 4GB LPDDR4x RAM Storage – 128GB UFS2.1 Gear3 2 lane Flash Connectivity Wi-Fi 802.11a/b/g/n/ac 2.4/5Ghz 2×2 Bluetooth 5.0 + BLE WiGig60 802.11ad with on-board antenna Dimensions – 70 x 60 mm Carrier Board Display – 1x HDMI 2.0 out up to 4K Ultra […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 24 Comments on A64-OLinuXino Open Source Hardware Allwinner A64 Development Board Launched for 50 Euros

A64-OLinuXino Open Source Hardware Allwinner A64 Development Board Launched for 50 Euros

Several boards based on Allwinner A64 quad core 64-bit ARM processor have been available on the market for a while, with products such as Pine A64(+), NanoPi A64, or Banana Pi BPI-M64. Olimex also has been working on A64-OLinuXino since late 2015, and the company has now formally launched the board for 50 Euros, which also happens to be the very first open source hardware board based on Allwinner A64. A64-OLinuXino Rev. C board specifications: SoC – Allwinner A64 quad core Cortex-A53 processor with Mali-400MP2 GPU System Memory – 1 or 2GB DDR3L @ 672 MHz Storage – micro SD slot, Optional 4 or 16GB industrial grade eMMC flash, optional SPI Flash Video Output & Display I/F – HDMI, 20-pin MIPI & 40-pin LCD display connectors Audio – Via HDMI, 3.5mm Audio In and Out jacks (Headphone output and microphone input can be changed to Line-in and Line-out via jumpers) […]