development board News - Page 45 of 289 - CNX Software

June 13, 2023June 13, 2023 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

CompuLab UCM-iMX93 – A miniature NXP i.MX 93 module with WiFi 5 & Bluetooth 5.3

CompuLab UCM-iMX93 is a miniature system-on-module powered by the new NXP i.MX93 Cortex-A55 AI processor family with up to 2GB RAM and 64GB eMMC flash. The tiny 38x28mm features a Gigabit Ethernet PHY, a WiFi 5 and Bluetooth 5.3 wireless modules, and plenty of multimedia, communication, and peripheral interfaces through two 100-pin high-density connectors including display and camera interfaces, USB ports, CAN FD, and up to 79 GPIOs. UCM-iMX93 specifications: SoC – NXP i.MX9352 or i.MX9331 dual-core/single-core Arm Cortex-A55 @ 1.5 GHz (industrial) / 1.7 GHz (commercial) with Arm Cortex-M33 real-time core @ 250 MHz, Arm Ethos U65 microNPU System Memory – 512MB to 2GB LPDDR4 Storage – 8GB to 64GB eMMC flash Networking Gigabit Ethernet PHY Certified WiFi 5 (802.11ac) and Bluetooth 5.3 BLE module (NXP 88W8997) 2x 100-pin 0.4mm pitch high-density UCM connectors Display 4-lane MIPI-DSI up to 1920 x 1080 @ 60Hz 4-lane LVDS up to 1366 […]

June 10, 2023June 10, 2023 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

T-RGB ESP32-S3 board gets larger 2.8-inch round color display

T-RGB ESP32-S3 board 2.8-inch round display

LILYGO T-RGB ESP32-S3 board was first introduced last year with a 2.1-inch round color touchscreen display, and the company has an update with a T-RGB board with a 2.8-inch display. The new board still offers WiFi 4 and Bluetooth 5.0 connectivity, 8MB PSRAM, and 16MB flash storage, as well as a microSD card socket for storage, a Grove I2C connector for expansion, and LiPo battery support. T-RGB specifications: SoC – Espressif ESP32-S3R8 dual-core Tensilica LX7 microcontroller up to 240 MHz with vector instructions for AI acceleration, 8MB PSRAM, WiFi 4 and Bluetooth 5.0 LE + Mesh connectivity Storage – 16MB SPI flash, MicroSD card socket Display – 2.8-inch round 18-bit RGB color IPS TFT display with 480×480 resolution (ST7701S SPI controller), 3-wire SPI touchscreen panel via GT911 controller USB – USB Type-C port for power and programming Expansion – Grove I2C connector Misc – BOOT and Reset buttons Power Supply […]

June 9, 2023 by Jean-Luc Aufranc (CNXSoft) - No Comments

Axiomtek AIE110-XNX is an affordable Edge AI Developer Kit based on NVIDIA Jetson Xavier NX

Axiomtek AIE110-XNX Edge AI developer kit provides up to 21 TOPS of accelerated AI computing performance thanks to an NVIDIA Jetson Xavier NX system-on-module with a 6-core NVIDIA Carmel ARM v8.2 64-bit CPU and a 384-core NVIDIA Volta GPU with 48 Tensor Cores. The new devkit serves as a relatively low-cost cost development kit with no minimum order, instead of getting full-feature embedded computers such as the company’s AIE900-XNX Edge AI system also based on the same Jetson Xavier NX module. Axiomtek AIE110-XNX specifications: NVIDIA Jetson Xavier NX system-on-module with CPU – 6-core NVIDIA Carmel Armv8.2 64-bit CPU with 6 MB L2 + 4 MB L3 cache GPU – 384-core NVIDIA Volta GPU with 48 Tensor Cores AI Accelerator – 2x NVDLA System Memory – 8GB 128-bit LPDDR4x onboard Storage – 16GB eMMC flash Storage – M.2 Key M 2280 with PCIe x4 NVMe SSD slot, microSD slot Video Output […]

June 8, 2023 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Epi 32U4 – An Arduino-compatible USB-C development board with ATmega32U4 MCU (Crowdfunding)

Epi 32U4 Arduino USB Type-C development board

Epi 32U4 is a tiny Arduino-compatible development board based on a Microchip ATmega32U4 8-bit AVR microcontroller with just a USB-Type-C port and 23 I/O pins accessible through castellated holes that can be soldered to headers or another PCB. The board also includes some protection such as a fuse, ESD protection, a ferrite bead, and a low-pass filter for the analog reference voltage. Ping Hobbyelektronik, the developer, says it’s especially useful for compact USB keyboards, but it also has more I/O ports than a standard Pro Micro board, so it’s appropriate for a range of other projects as well. Epi 32U4 board specifications: MCU – Microchip ATmega32U4 8-bit AVR microcontroller @ 8MHz or 16 MHz with 32 KB flash, 2.5 KB SRAM, 1 KB EEPROM USB 1x USB Type-C port for power and programming USB D+ and D- lines are broken out ESD and surge protection on USB data lines and […]

June 8, 2023August 22, 2023 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Silicon Labs FG28 Sub-GHz wireless and 2.4 GHz BLE SoC supports Amazon Sidewalk, Wi-SUN, etc…

Silicon Labs dual-band FG28 Cortex-M33 SoC comes with sub-Gigahertz and 2.4 GHz Bluetooth LE radios that support long-range networks and protocols like Amazon Sidewalk, Wi-SUN, and other proprietary protocols, as well as a built-in AI/ML accelerator for machine learning inference and SiLabs Secure Vault technology. The chip looks to be an update to the sub-GHz FG25 Cortex-M33 microcontroller with an additional 2.4 GHz BLE radio, but somehow less program memory (up to 256KB) and storage (up to 1024 KB). The peripherals implemented in the chip are almost the same, as the microcontroller gains support for predictive maintenance with a small matrix vector processor for AI/ML acceleration. Silicon Labs FG28 (EFR32FG28) specifications: MCU core – Arm Cortex-M33 @ 78 MHz with DSP instructions and FPU On-chip memory – Up to 256 kB RAM data memory On-chip storage – Up to 1024 kB flash program memory AI accelerator – Matrix Vector Processor […]

June 2, 2023June 2, 2023 by Jean-Luc Aufranc (CNXSoft) - No Comments

Pico-Ice board combines Raspberry Pi RP2040 MCU with Lattice ICE40 UltraPlus 5K FPGA

Pico Ice Raspberry Pi RP2040 Lattice FPGA board

tinyVision.ai Pico-Ice is a development board with a Raspberry Pi RP2040 MCU and a Lattice ICE40 UltraPlus 5K FPGA connected through an 8-bit bus. The Arm Cortex-M0+ microcontroller provides the clock for the FPGA and can program the FPGA directly or the dedicated FPGA flash using a drag-drop of a UF2 file. Just a few days ago we wrote about the LILYGO T-FPGA board that combines an ESP32-S3 wireless MCU with a Gowin FPGA connected through a 6-bit bus, and the Pico-Ice board provides a similar option with different chips and without wireless connectivity. Pico-Ice specifications: MCU – Raspberry Pi RP2040 dual-core Cortex-M0+ microcontroller @ 133 MHz with 264KB SRAM with all pins exposed FPGA – Lattice UltraPlus iCE40UP5K FPGA with 5.3K LUTs, 1Mbit SPRAM, 120Kbit DPRAM, 8x multipliers with all pins brought out Memory & storage chips MCU – 4MB QSPI flash FPGA – 4MB QSPI Flash, 8MB low […]

June 2, 2023 by Jean-Luc Aufranc (CNXSoft) - No Comments

Khadas VIM4 Amlogic A311D2 SBC gets 3.2 TOPS NPU

First introduced in 2022, the Khadas VIM4 SBC will now sell with an Amlogic A311D2-N0D Cortex-A73/A53 processor equipped with a 3.2 TOPS NPU, and the version without AI accelerator will be phased out. I reviewed the Khadas VIM4 with both Android 11 and Ubuntu 22.04 last year, and really liked the user experience notably thanks to the OOWOW system that makes it really easy to try different operating systems downloaded from Khadas servers, although some features like support for GPU acceleration still needed to be worked on at the time. One thing missing compared to the previous generation Khadas VIM3 SBC was an on-chip NPU to accelerate AI workloads, and the latest revision of the Amlogic A311D2 processor (with N0D suffix) fixes that on the Khadas VIM4. “Khadas VIM4 with NPU” specifications: SoC – Amlogic A311D2-N0D octa-core processor with 4x Arm Cortex-A73 cores @ up to 2.2 GHz and 4x […]

June 1, 2023May 31, 2023 by Leo Zachary - 3 Comments

MangoPi mCore-R818 module powers CyberPad 3.1-inch handheld android “tablet”

mCore-R818 is the first time that MangoPi adopts the design combination of a core-lite module and a carrier board. As its name suggests, it is an AllWinner R818 SoM whose SoC integrates an Imagination PowerVR GE8300 GPU for UI rendering, can drive MIPI DSI, LVDS, and RGB displays, as well as cameras through a MIPI CSI interface, 8MP/5MP/2MP interfaces. The Allwinner R818 system-on-module powers a feature-rich carrier board as well as an upcoming Cyberpad Android “tablet” with a 3.1-inch display. MangoPi mCore-R818 The package design of the processor itself is small, so the MCore-R818 core board is only 3x3cm in size, but still contains four components with the Allwinner R818, the eMMC flash, LPDDR4 memory, and the AXP717 PMU. MangoPi provides two hardware configurations: 2GB DDR with 16GB eMMC flash, and 4GB DDR with 32GB eMMC flash. MCore-R818 Core Lite Specifications: SoC – Allwinner R818 CPU – Quad-core Arm Cortex-A53 […]