development board

Posted on by Jean-Luc Aufranc (CNXSoft) - 2 Comments on Pandauino 644/1284 Narrow are Compact ATmega644/1284 Arduino Boards (Crowdfunding)

Pandauino 644/1284 Narrow are Compact ATmega644/1284 Arduino Boards (Crowdfunding)

Pandauino Narrow Pinout Diagram

Pandauino 644 Narrow and 1284 Narrow boards powered by Microchip ATmega644 and ATmega1284 8-bit AVR MCU in a compact form factor slightly larger than the official Arduino Nano. The Pandaunino boards also come with up to eight times more RAM, more flash, as well as ten extra digital I/Os compared to Arduino Nano while keeping software compatibility. Pandauino 644/1284 Narrow boards specifications: MCU 644 Narrow – Microchip ATmega644 8-bit AVR microcontroller with 64KB flash, 4KB SRAM, 2KB EEPROM 1284 Narrow – Microchip ATmega1284 8-bit AVR microcontroller with 128KB flash, 16KB SRAM, 4KB EEPROM USB – 1x Micro USB port for power and programming I/Os – 24x digital I/Os including up to 8x PWM (6x max for 644 Narrow), 8x analog I/Os, 1x SPI, 2x USART, 1x I2C Power Supply – 5V input with on-board 5V and 3.3V regulators. Max current – USB: 500 mA limited by a PTC. Vin: 800 […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 6 Comments on ESP32 Board Features mini PCIe & SIM Card Sockets for 4G LTE Connectivity

ESP32 Board Features mini PCIe & SIM Card Sockets for 4G LTE Connectivity

ESP32 SIM Card T-PCIe Board Pinout Diagram

LilyGO has launched yet another ESP32 WiFi & Bluetooth IoT board. As its name implies, TTGO-T-PCIe board includes a mini PCIe socket that coupled with a SIM card socket allowing users to insert a 4G LTE mPCIe card to add cellular connectivity. The company also offers optional SIM7000 2G or SIM7600 4G LTE modems that come with LTE and GPS antennas. You should probably be able to add other cellular mini PCiE, as well as other wireless mPCIe modems for LoRa, Satellite communication, etc… (Finally most probably not) TTGO-T-PCIe board specifications: Wireless module – ESP32-WROVER-B with ESP32 dual-core wireless SoC with 520KB SRAM, WiFi and Bluetooth with on-board antenna, as well as 4MB flash, and 8MB PSRAM Connectivity 802.11 b/g/n WiFi 4 up to 150 Mbps (ESP32) Bluetooth 5.1 LE (ESP32) Optional wireless cards via mPCIe socket (I2C and UART), SIM card slot for 2G and 4G LTE cellular networking […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 4 Comments on Qualcomm IPQ8074 Embedded Board Offers 802.11ax WiFI 6 12×12 MIMO DBDC Connectivity

Qualcomm IPQ8074 Embedded Board Offers 802.11ax WiFI 6 12×12 MIMO DBDC Connectivity

Qualcomm IPQ8074 Reference Board

Qualcomm IPQ8074 802.11ax WiFi 6 SoC was first unveiled in 2017 and designed for high-end routers, gateways, and access points supporting up 12×12 MIMO configuration (8×8 5GHz + 4×4 2.4 GHz) using Dual-Band Dual Concurrency (DBDC). I was just informed about a Qualcomm IPQ8074 embedded board going under the names DR8074A or HK01 depending on the company promoting it, respectively Wallys Communication and Compex. Qualcomm IPQ8074 embedded board (AP.HK01) specifications: SoC – Qualcomm Atheros IPQ8074A quad-core Arm Cortex A53 processor 2.2GHz CPU System Memory – 1GB (2x 512MB) DDR3L RAM (Option for up to 4GB) Storage – 8GB eMMC flash, 32MB NOR Flash, 256MB NAND flash, 1x micro SD Card socket Connectivity Wired 5x Gigabit Ethernet (1GbE) RJ45 ports 1x 10Gigabit Ethernet (10GbE) RJ45 port 1x SFP+ Port WiFi On-board 4×4 2.4GHz MU-MIMO 802.11b/g/n/ax WiFi 6 up to 1147Mbps On-board 2x(4×4) or 8×8 5GHz MU-MIMO 802.11a/n/ac/ax WiFI 6 up to […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 13 Comments on Orange Pi 4 SBC Gets a $16 4G LTE mini PCIe Card based on Rockchip RM310

Orange Pi 4 SBC Gets a $16 4G LTE mini PCIe Card based on Rockchip RM310

Orange Pi 4 4G LTE Mini PCIe Card

Orange Pi 4 SBC is one of the most cost-effective Rockchip RK3399 SBC’s, as it sells for as low as $50 with 4GB RAM, Gigabit Ethernet, WiFi, and Bluetooth, HDMI 2.0 output, etc.. The board also comes with a 24-pin PCIe connector that’s not of much use on its own, so the company introduced a $4 PCIe adapter board providing access to a standard mPCIe socket and a SIM card slot so you could install your own. 4G mini PCIe cards can easily cost around $50 or more, but Shenzhen Xunlong Software has now launched its own 4G LTE mini PCIe card based on Rockchip RM310 module and sold for $16 on Aliexpress, excluding shipping. mPCIe card and RM310 module specifications: Frequency bands LTE-FDD – B1, B3, B5, B8 LTE-TDD – B38, B39, B40, B41 WCDMA – B1, B5, B8 GSM – 850, 900, 1800, and 1900 MHz Data rates […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 2 Comments on ROScube Pico SBC Runs Ubuntu & ROS on Intel Atom or Rockchip PX30 Processor

ROScube Pico SBC Runs Ubuntu & ROS on Intel Atom or Rockchip PX30 Processor

RoScube Pico SBC Devkit

ADLINK has launched ROScube Pico SBC designed for robotics projects and powered by either an Intel Atom x5 Apollo Lake processor or a Rockchip PX30 Arm Cortex-A35 processor via their SMARC-compliant system-on-modules namely LEC-AL and as LEC-PX30. Both models run Ubuntu and ROS/ROS-2 operating systems simultaneously, and the company also provides NeuronBot robotics development and demo kit based on the SBC. ROScube Pico SBC and Devkit If ROScube Pico looks similar it’s because it appears to be based entirely on ADLINK previously announced ADLINK Industrial-Pi (I-Pi) SMARC Development Kit based on Rockchip PX30, and Vizi-AI development starter kit based on Atom x5-E3940 SoC and Movidius Myriad X VPU. Those are the specifications listed for ROScube Pico: SMARC Module For ROScube Pico NPS-1 – LEC-AL with Intel Atom processor, Intel Movidius Myriad X AI accelerator, 8GB LPDDR4 RAM, 32GB eMMC For ROScube Pico NPS-4 – LEC-PX30 with Rockchip PX-30 quad-core Cortex-A35 […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 11 Comments on TTGO T-Internet-POE Board Provides Ethernet, PoE, WiFi, Bluetooth for $16

TTGO T-Internet-POE Board Provides Ethernet, PoE, WiFi, Bluetooth for $16

TTGO T-Internet-POE

We’ve written about several ESP32 POE boards in the past including wESP32, but there’s now another one with LilyGO TTGO T-Internet-POE board offering Fast Ethernet, PoE,  as well as WiFI and Bluetooth connectivity through ESP32-WROVER-B module. TTGO T-Internet-POE specifications: Wireless Module – ESP32-WROVER-B with ESP32 dual-core WiSoC, 4MB flash, 8MB PSRAM Storage – MicroSD card socket Connectivity 2.4 GHz 802.11b/g/n WiFi 4 and Bluetooth 5.1 via ESP32 10/100M Ethernet via LAN8720A Ethernet PHY Expansion – Unpopulated I/O header with UART, SPI, I2C, PWM, I2S, ADC; 3.3V I/O voltage Debugging / Programming Serial port via USB-C port and CP2104 USB to TTL chip (TBC) 6-pin programming interface with Tx/Rx, IO0, Reset, 3.3V and GND Misc – BOOT and reset buttons, 32.768MHz crystal oscillator Power Supply 5V via USB-C port up 50V PoE via Pulse PA2369NL transformer and HanRun HR861153C PoE compliant RJ45 jack SI3404 power management chip Dimensions – 70 x […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 1 Comment on Exor GigaSOM GS01 SoM and Devkit Combine Intel Atom E39xx CPU and Cyclone 10 GX FPGA

Exor GigaSOM GS01 SoM and Devkit Combine Intel Atom E39xx CPU and Cyclone 10 GX FPGA

EXOR Intel Atom + Cyclone FPGA Smart Factory / Industrie 4.0 Development Kit

EXOR International has worked in collaboration with Arrow Electronics to design and manufacture GigaSOM GS01 system-on-module combining an Intel Atom E39xx Apollo Lake processor and Cyclone 10 GX FPGA. The module and corresponding development kit are specifically designed for smart factory & “Industrie 4.0” applications with the processor running Intel’s time-coordinated computing plus a real-time “IoT stack”, and the FPGA supporting IEEE 802.1 time-sensitive networking (TSN) and 10Gbps connectivity. GigaSOM GS01 module specifications: Apollo Lake SoC (one or the other) Intel Atom x5-E3930 dual-core processor @ 1.3 GHz / 1.8 GHz (Turbo) with 12EU Intel HD Graphics 500; 6.5W TDP Intel Atom x5-E3940 quad-core processor @ 1.6 GHz / 1.8 GHz with 12EU Intel HD Graphics 500; 9.5W TDP Intel Atom x7-E3950 quad-core processor @ 1.6 GHz / 2.0 GHz with 18EU Intel HD Graphics 505; 12W TDP FPGA – Intel Cyclone 10 GX up to 220 KLE System Memory […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 11 Comments on Cucumber ESP32-S2 Development Board Comes with USB OTG Port, Optional Sensors

Cucumber ESP32-S2 Development Board Comes with USB OTG Port, Optional Sensors

Cucumber ESP32-S2 USB OTG Development Board

Yesterday, I wrote about LilyGO TTGO ESP32-S2 WiFi IoT board, but one commenter mentioned it missed one of the key features of ESP32-S2 chip: a USB OTG port. While USB OTG  is accessible through the header pins, it’s not the most convenient to use. I also quickly mentioned Cucumber ESP32-S2 development board in that post, but I did not expand too much since I thought it should only ship within Thailand. But the board does include two USB Type-C ports, one for the usual USB UART connector, and the other for USB OTG, and I found out the board is available worldwide. The board is available in multiple variants with or without sensors and PSRAM, and with external IPEX antenna or PCB antenna using ESP32-S2-WROVER(-I) or ESP32-S2-WROOM(-I) module. Cucumber specifications: Wireless Module (one of the other): ESP32-S2-WROVER with ESP32-S2, 4MB flash, 2MB PSRAM, on-board PCB antenna ESP32-S2-WROVER-I with ESP32-S2, 4MB […]

Exit mobile version