digital signage

Posted on by Jean-Luc Aufranc (CNXSoft) - 4 Comments on Ugoos UM4 TV Box/Dongle Runs Android 7.1.2 with Some Uncommon Features

Ugoos UM4 TV Box/Dongle Runs Android 7.1.2 with Some Uncommon Features

Ugoos UM3 was launched in 2014 with Android 4.4 on Rockchip RK3288 processor, and could be described a a tiny TV box, or large TV stick. That form factor must have had some success, and they later launched AM2 model powered by Amlogic S905 plus Android 6.0. The company has now just launched Ugoos UM4 with the same form factor but with Rockchip RK3328 processor running Android 7.1.2. Ugoos likes to add some software features often not found on other devices, and that would normally require hacking the firmware, or purchasing apps. Ugoos UM4 specifications: SoC – Rockchip RK3328 quad core Cortex A53 processor with ARM Mali-450MP GPU System Memory – 2GB DDR4 memory Storage – 16 GB eMMC flash (8GB optional) + micro SD card slot up to 32 GB Video & Audio Output – HDMI 2.0a female port up to 4k @ 60 fps with CEC and HDR […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 4 Comments on Rikomagic Introduces V3 TV Stick, MK39 TV Box, R3 Projector, and DS01 Digital Signage Player

Rikomagic Introduces V3 TV Stick, MK39 TV Box, R3 Projector, and DS01 Digital Signage Player

Rikomagic will launch four new Android devices this month with RKM V3 TV stick powered by Rockchip RK3328 processor, RKM MK39 TV box / mini PC based on Rockchip RK3399, RKM R3 projector with an octa-core processor, and DS01 digital signage player. RKM V3 TV Stick RKM V3 specifications: SoC – Rockchip RK3328 quad core Cortex A53 processor @ 1.5 GHz with Mali-450MP2 GPU System Memory – 2 GB RAM Storage – 8 GB eMMC flash + micro SD card up to 32GB Video & Audio Output – HDMI 2.0a up to 4K @ 60 Hz with HDR10 and HLG support Video Codec – 4K VP9, H.265 and H.264. 1080p VC-1, MPEG-1/2/4, VP6/8 Connectivity – 10/100M Ethernet, 802.11 b/g/n WiFi, Bluetooth 4.2 USB – 1x USB 2.0 port, 1x USB 3.0 port Misc – IR receiver? (TBC) Power Supply – 5V/2A via power barrel jack The stick runs Android 7.1 […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 12 Comments on VIA ALTA DS 4K Digital Signage Player is Powered by Zhaoxin ZX-2000M Quad Core Cortex A17 Processor

VIA ALTA DS 4K Digital Signage Player is Powered by Zhaoxin ZX-2000M Quad Core Cortex A17 Processor

VIA has just announced their latest ALTA DS 4K digital signage player with a “quad core Cortex A17 processor”, which I first assumed must be Rockchip RK3288 processor since it’s one of the few with that processor core. But the processor is actually from a company I had never heard before: Shanghai Zhaoxin Semiconductor that does both x86 and ARM SoCs for various markets. But let’s check out the product with VIA ALTA DS 4K Digital Signage specifications: SoC – Zhaoxin ZX-2000M quad core ARM  Cortex-A17 processor @ up to 1.4GHz with 2D/3G GPU supporting OpenGL ES 3.0, and a video processing unit System Memory – 2GB DDR3 @ 1600MHz Storage – 8GB eMMC Flash memory, SD card slot Video Output – HDMI 1.4 with CEC support Video Codecs –  MPEG-2, VC-1, H.264 and H.265 video decoding up to 3840x2160p @30fps; H.264 encoding Connectivity – 1x Gigabit Ethernet port (Realtek RTL8211FS-CG), […]

Posted on by Jean-Luc Aufranc (CNXSoft) - No Comments on E-ink Demonstrated a Foldable E-Book Prototype, Color-Changing Clothes, Smartcards and More at Display Week 2017

E-ink Demonstrated a Foldable E-Book Prototype, Color-Changing Clothes, Smartcards and More at Display Week 2017

E-ink is known with their e-paper technology with the same name, that is used in e-book readers and some signage applications, but the company demonstrated some  their prototypes and customer’s products at SID’s Display Week in Los Angeles last month, with some capabilities I had not seen before. Some of the notable solutions and products include: 10.2″ foldable e-book reader prototype based on the company’s flexible Carta Mobius plastic display with 220 ppi A dress that can change colors using E-ink Prism film that was made for a fashion exhibition in Japan. A 42″ active matrix E-ink digital signage display Various examples of products based on E-ink such as smartwaches (e.g. Sony FES Watch U), e-book readers, flexible displays… NFC Smartcard with E-ink display that has the same thickness as normal smartcard, but can be used to display account balance, price of last purchased item, etc… QuirkLogic Quilla interactive and […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 3 Comments on Boardcon Introduces Rockchip RK3399 PICO3399 CPU Module and EM3399 Baseboard

Boardcon Introduces Rockchip RK3399 PICO3399 CPU Module and EM3399 Baseboard

There’s a limited number of boards based on Rockchip RK3399 processor, with the easiest to work with (for non-Chinese readers) probably being Firefly-RK3399. Shenzhen Xunlong is working on their own Orange Pi RK3399 board, 9Tripod released their X3399 SoM and devkit, Boardcon has also launched their own RK3399 SoM (system-on-module) and baseboard solution with respectively PICO3399 CPU module and EM3399 board. PICO3399 SoM specifications: SoC – Rockchip RK3399 hexa core processor with a dual ARM Cortex-A72 core cluster @ up to 2.0 GHz, quad ARM Cortex-A53 cluster, and ARM Mali-T860MP4 GPU System Memory – 4GB LPDDR3 Storage – 8GB eMMC flash 314-pin edge connector with 2x USB2.0 Host, 2x USB3.0 or 2x  Type-C, UART, MIPI, GbE, HDMI in&out, Audio, I2C, I2S, PCI-E, SD/MMC/SDIO, GPIO, eDP.. Power Supply – 5V Dimensions – 82 x 50mm (8 layers) The company provides support  for Android6.0.1 and Debian for the module. If the info […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 3 Comments on Shuttle NS02E Rockchip RK3368 Android mini PC Supports PoE for Digital Signage and Thin Clients

Shuttle NS02E Rockchip RK3368 Android mini PC Supports PoE for Digital Signage and Thin Clients

The market is flooded of octa-core Android mini PCs or TV boxes for the consumer market, but Rockchip RK3368 powered Shuttle NS02E Android mini PC targets a different mark, specifically digital signage and thin clients as it’s been designed for 24/7 nonstop operation, and supports features such as PoE (Power over Ethernet). Shuttle XPC nano NS02E specifications: SoC – Rockchip RK3368 ARM Cortex A53 processor @ up to 1.5 GHz with Imagination PowerVR G6110 “Rogue” GPU System Memory – 2GB RAM Storage – 16GB eMMC flash, 2.5″ SATA bay for 7″ drives (requires one extra optional accessory), SD card reader Video Output – HDMI 2.0 Audio Output – Via HDMI, 3.5mm Line OUT audio jack Connectivity – Gigabit Ethernet (RTL8211-CG transceiver) with PoE support, 802.11 b/g/n WiFi and Bluetooth 4.0 (RTL8723BS module) USB – 3x USB 2.0 host ports Misc – Kensington lock hole, power button, power LED, HDD LED, […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 11 Comments on GIGABYTE BRIX IoT Apollo Lake Fanless mini PC is Designed for the Internet of Things, Digital Signage, Thin Clients

GIGABYTE BRIX IoT Apollo Lake Fanless mini PC is Designed for the Internet of Things, Digital Signage, Thin Clients

GIGABYTE has unveiled BRIX IoT mini PC powered by either Intel Celeron N3450 or Pentium N4200 processor both part of Intel’s Apollo Lake family, and as the name implied the devices target Internet of Things applications. GIGABYTE BRIX IoT specifications: SoC (one or the other) Intel Celeron  N3450 quad core processor @ up to 2.2GHz with Intel HD graphics 500 (6W TDP) Intel Pentium N4200 quad core processor @ up to 2.5GHz with Intel HD graphics 505 (6W TDP) System Memory – 2x SO-DIMM DDR3L slots @ 1333/1600/1866 MHz up to 8GB Storage – 1x M.2 slot, 1x micro SD slot, optional 32 or 64GB eMMC flash Connectivity Dual Gigabit Ethernet via Realtek RTL8111HS Intel Dual band Wireless-AC 3165 module with two SMA antenna connectors 3G via mini PCIe slot and SIM card slot with one SMA antenna connector Video Output – Dual HDMI 1.4b up to 3840×2160 @ 30 […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 5 Comments on MQMaker Koala is a Features-Packed Development Board Powered by Rockchip RK3288 Processor

MQMaker Koala is a Features-Packed Development Board Powered by Rockchip RK3288 Processor

MQMaker launched MiQi board based on Rockchip RK3288 quad core Cortex A17 processor last year with the hardware aimed at hobbyists and makers, but the company has been developing a higher-end board – named Koala – based on the same processor, featuring many more ports and features, and geared towards the enterprise market. Koala board preliminary specifications: SoC – Rockchip 3288 quad core ARM Cortex A17 up to 1.8 GHz with Mali-T764 GPU supporting OpenGL ES 1.1/2.0 /3.0, and OpenCL 1.1 System Memory –  2GB DDR3 (default) Storage – 16 GB eMMC flash (default) + micro SD slot Video Output / Display Interface – HDMI 2.0, header for eDP, MIPI, LVDS, LCD backlight header, touch panel header Audio – HDMI out, optical S/PDIF, 3.5mm analog stereo audio jack, microphone header, audio L/R header Connectivity – Gigabit Ethernet, WiFi or WiFi + Bluetooth module, mini PCIe slot for 3G/4G card + SIM card slot USB – 4x […]

Exit mobile version