digital signage News - Page 22 of 29 - CNX Software

August 24, 2013 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

Habey EMB-3700 Embedded Board Features AMD G-Series SoC

AMD recently announced their G-Series SoC family that combines a CPU, a GPU, and a controller hub into a single chip, as ARM has been doing for a while, and more products based on the platform are entering the marketplace. I’ve already written about Win Enterprises MB-60830 and Netboard A10 single board computers, and today I’ll introduce another option with Habey EMB-3700, a 3.5″ embedded board that targets applications such as digital signage, point-of-sale (PoS), industrial automation, machine to machine, in-vehicle telemetry, and medical technology. Habey EMB-3700 Specifications: SoC: GX-420CA quad core @ 2.0GHz (25W TDP) with Radeon HD8400E or GX-415GA quad core @ 1.5GHz (15W TDP) with Radeon HD8330E or GX-210HA dual core @ 1.0GHz (9W TDP) with Radeon HD810E System Memory – 1x 204-Pin DDR3 SODIMM, up to 4GB (ECC) RAM Storage – 2x 6Gb/s SATA 3.0 connectors Video Output: HDMI up to 1920 x 1200 VGA up […]

July 4, 2013May 29, 2017 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

$130 Giada Q11 Android PC Features an LVDS Port, a mini PCIe slot, a Battery and 2.5″ HDD Support

Giada Q11 is an Android media player powered by AllWinner A10 with 1GB RAM and 8GB flash, which are pretty low specifications by today’s standard, so I would probably not recommend using at home. However, it comes with some pretty rare ports and features: an LVDS port, a mini PCIe slot (for 3G module only), a COM port, and a 2200 mAh battery capable of driving displays. Those extra features could make it a pretty good solution for specific applications such as high definition digital signage players. If your setup does not support networking, and you need to store media files in the device, a 2.5″ for SATA hard drive is also available. Giada Q11 Specifications: SoC – Allwinner A10 Cortex A8 processor @ 1GHz + ARM Mali-400 GPU System memory – 1GB DDR3 Storage – 8GB NAND flash, micro SD card slot (up to 32GB), and SATA II (2.5″ […]

June 28, 2013 by Jean-Luc Aufranc (CNXSoft) - No Comments

FossilShale FS-DM385-SOM Features TI DaVinci SoC for HD Media applications

FossilShale, an embedded company based in Bangalore, has announced a system-on-module based on Texas Instruments Davinci TMS320DM385 SoC that targets applications high-definition decoding and encoding (up to 1080p60) such as IP Cameras, HD video conferencing endpoints, digital signage, portable medical imaging and diagnostics, or camcorders. It can be used standalone for evaluation, or with a carrier board. FS-DM385-SOM Specifications: SoC – Texas Instruments TMS320DM385F ARM Cortex A8 core @ 1GHz with HDVICP v2 video core handling H.264 BP/MP/HP, MPEG2, VC1, MPEG4 SP/ASP, JPEG/MJPEG encoding and decoding. Memory – 1GB DDR3 Storage – 512MB NAND flash +1x Micro SD/MMC connector (up to 32GB) Audio / Video: 1x HDMI Out (Micro) 1x LCD TFT Interface (24 Bit RGB) 1x Camera Interface (MIPI) 1x Integrated Composite Video In & Audio Line In(Stereo Jack) 1x Integrated Composite Video Out & Audio Line Out(Stereo Jack) Other Interfaces: 1x USB OTG 1x IrDA Accelerometer 1x I2C, 1x SPI […]

May 20, 2013 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Win Enterprises MB-60830 Single Board Computer Powered by AMD Embedded G-Series SoC

At the end of last month, AMD announced their first Embedded SoC family that combines a CPU, a GPU, and a controller hub into one chipset. Win Enterprises is one of the first companies to release a board based on the platform with MB-60830, a single board computer powered by AMD G-Series dual core or quad core SoCs. The board is designed for embedded applications such as digital signage, gaming, medical imaging, kiosks/POS, thin client and factory automation. The board specifications are as follows: SoC – AMD Embedded G-Series SoC dual or quad core. System Memory – 1x DDR3 @ 1600MHZ / SODIMM up to 4GB Storage – 1x SATA 6.0 Gb/s, 1x Half-size Mini-PCIe supporting mSATA for SSD Connectivity – Intel i211 AT Gigabit Ethernet Video Outputs: 1x VGA 1x dual channel 24-bit LVDS 1x HDMI with Optional Chrontel CEC Support Digital I/O – 8-bit programmable LPC – 1x […]

April 25, 2013 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

AMD Unveils AMD G-Series SoCs For Embedded Applications

In 2011, AMD launched the G-Series APUs (Accelerated Processing Unit) that combines the CPU and GPU into one chipset which then connects to a controller hub to handle I/Os, and recently the company announced AMD G-Series SoC at Design West 2013. The new solution combines a “Jaguar” CPU, a Radeon HD8000 series GPU and a controller hub into one and only SoC, further integrating functions. Both AMD G-Series APU and SoC target embedded systems such as industrial control and automation, digital signage, electronic gaming systems, SMB storage, IP-TV, medical and network appliances, set-top boxes and more. AMD claims G-Series SOCs offer up to 113 percent improved CPU performance compared to G-Series APU, and up to a 125 percent advantage compared to the Intel Atom (Dhyrstone, EEMBC CoreMark). The platform also includes support for DirectX 11.1, OpenGL 4.2x and OpenCL 1.2 yielding up to a 20 percent graphics improvement over G-Series […]

February 18, 2013February 18, 2013 by Jean-Luc Aufranc (CNXSoft) - 9 Comments

PQ Labs iStick A200 Android mini PC Connects to G4 Series Multi-Touch Screens

PQ Labs iStick A200 is a Rockchip RK3066 Android 4.1.1 mini PC with 2 GB RAM, 4 GB Flash, an HDMI (female) output, a USB 2.0 Host port, and a miniUSB port for power. Pretty boring stuff if you ask me… And I would not be writing about it, if the company hadn’t interfaced their infrared touch frames to this mini PC to allow 10-point multi-touch on a large screen or projector output, making it a pretty good solution for conferences and interactive digital signage. Before going further, let’s have a look at the details of specifications for the iStick A200: SoC – ARM Cortex A9 Dual Core @ 1.6Ghz with HyperSpeed (Equivalent to 2.0Ghz Dual Core) and Quad Core Mali400 GPU (cnxsoft: It has to be Rockchip RK3066) System Memory – 2 GB DRAM chipset Storage – 4 GB NAND flash + microSD socket (Up to 32 GB) Video […]

January 24, 2013January 25, 2013 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

Embedded Linux Conference 2013 Schedule

The Embedded Linux Conference (ELC 2013) will take place on February 20 – 22, 2013 at Park 55 Hotel in San Francisco, California. ELC consists of 3 days of presentations, tutorials and sessions. There will be over 50 sessions during those 3 days. I’ll highlight a few sessions that I find particularly interesting, and that did not get presented at ELCE 2012 (AFAICR). February 20 11:00 – Anatomy of the arm-soc git tree by Olof Johansson, Google We are now two years into the new maintainer model for ARM platforms, and we have settled down into a workflow that maintainers have adjusted well to. Still, when new platforms arrive, or when maintainer ship changes hands, there’s sometimes a bit of ramp-up in getting used to how we organize our git tree and how we prefer to see code submitted to fit that model. This presentation will give an overview of […]

January 23, 2013 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

VIA ARMOS-800 Embedded System Features a Freescale i.MX537 based Pico-ITX Board

VIA Technologies has recently announced the VIA ARMOS-800, an fanless system designed around VIA VAB-800 Pico-ITX board powered by Freescale i.MX537 processor. The VIA ARMOS-800 provides a ruggedized low-power system for industrial and in-vehicle applications such as a digital signage. Here are VIA ARMOS-800 specifications: Processor – 800MHz Freescale Cortex-A8 single core i.MX537 System Memory – 1GB DDR3-800 SDRAM using 128M x16 memory devices Storage – 4GB onboard eMMC Flash memory + ob-board micro SD connector Graphics – Supports two integrated graphics processing units: an OpenGL ES 2.0 3D graphics accelerator and an OpenVGTM 1.1 2D graphics accelerator Video Output – VGA and HDMI Audio I/O – Line-In, Line-out, Mic-in connectors Connectivity: Ethernet – 10/100 PHY transceiver (SMSC LAN8720A) Wi-Fi – Optional VIA 802.11n Wireless module VNT 9271 USB – 3x USB connectors + 1x on-board USB 2.0 pin header COM – 1x D-Sub 9-pin female connector CAN – […]