esp32 News - Page 40 of 68 - CNX Software

July 15, 2021July 21, 2021 by Jean-Luc Aufranc (CNXSoft) - 13 Comments

ESP32-C3 board comes with 16340 battery holder, D1 mini compatibility

It looks like ESP32-C3 floodgates have opened. We’ve just written about several NodeMCU ESP32-C3 boards, and now there’s another board with the RISC-V WiFI & Bluetooth processor. Meet LilyGo TTGO T-OI PLUS equipped with a 16340 battery holder. Getting a battery-powered ESP32-C3 board could prove to be very interesting as ESP32-C3 power consumption is much lower than ESP8266 and ESP32, notably in deep sleep mode, where the RISC-V processor consumes just 5uA, against 20 uA for ESP8266 and ESP32, and the difference is even greater in light sleep mode (ESP8266: 2000 uA vs ESP32-C3: 130 uA). LilyGo TTGO T-OI PLUS specifications: SoC – Espressif Systems ESP32-C3 single-core RISC-V processor @ 160 MHz with 2.4 GHz WiFi, Bluetooth 5.0 LE Storage – TBD flash (probably 2MB or 4MB) Antenna – Ceramic antenna and IPEX connector USB – USB-C port for power and programming Expansion 2x 8-pin headers with 12x GPIO, 1x […]

July 14, 2021January 9, 2023 by Jean-Luc Aufranc (CNXSoft) - 9 Comments

XUAN-Bike self-balancing, self-riding bicycle relies on flywheel, 22 TOPS Huawei Ascend A310 AI processor

After Huawei engineer Peng Zhihui Jun fell off this bicycle, he decided he should create a self-balancing, self-riding bicycle, and ultimately this gave birth to the XUAN-Bike, with XUAN standing for eXtremely, Unnatural Auto-Navigation, and also happening to be an old Chinese name for cars. The bicycle relies on a flywheel and a control board with ESP32 and MPU6050 IMU for stabilization connected over a CAN bus to the motors, as well as Atlas 200 DK AI Developer Kit equipped with the 22 TOPS Huawei Ascend A310 AI processor consuming under 8W connected to a 3D depth camera and motor for self-riding. It’s not the first time we see this type of bicycle or even motorcycle, but the XUAN-Bike design is also fairly well-documented with the hardware design (electronics + 3D Fusion360 CAD files) and some documentation in Chinese uploaded to Github. The software part has not been released so […]

July 12, 2021July 14, 2021 by Jean-Luc Aufranc (CNXSoft) - 16 Comments

NodeMCU ESP32-C3 WiFi & BLE IoT boards show up for about $4

ESP32-C3 RISC-V IoT processor with 2.4 WiFI and Bluetooth LE 5.0 was unveiled in December 2020, and Espressif Systems’ own ESP32-C3-DevKitM-1 board has been available in limited quantities as an “engineering sample”. But now I’ve noticed third-party NodeMCU ESP32-C3 boards are being sold on Aliexpress for around $4 with ESP32-C3S_Kit and ESP-C3-01M-Kit both based on AI Thinker ESP32-C3 modules announced a few months ago. NodeMCU ESP32-C3S_KIt Specifications: Wireless module – AI Thinker ESP32-C3S (footprint compatible with ESP32-S / ESP32-WROOM-32D) with ESP32-C3 RISC-V processor @ 160 MHz, 2.4 GHz WiFi, Bluetooth 5.0 LE, 4MB flash, on-board PCB antenna, and IPEX connector (which may be soldered or not). USB – Micro USB port for power and programming via CH340C USB to TTL chip Expansion – 2x 15-pin headers with GPIO, SPI, UART, ADC, I2S, 3.3V, GND Misc – RGB LED, Reset key, user-programmable key Dimensions – 49 x 26 mm ESP32-C3S_Kit is […]

July 6, 2021July 6, 2021 by Jean-Luc Aufranc (CNXSoft) - No Comments

RAKwireless announces 14 new WisBlock modules for IoT prototyping

Rakwireless has added 14 new Wisblock modules to the WisBlock IoT modular system introduced last year, plans to soon release a Raspberry Pi RP2040 based LoRaWAN Wisblock Core module, and will give away some Wisblock starter kits this week. As a reminder WisBlock IoT modular system is comprised of four block types: WisBlock Base – A carrier board with connectors for other block types, power supply, some ports WisBlock Core – Module with a microcontroller/processor WisBlock Sensor – Modules with environmental sensors, motion sensors, ambient light sensors, or others WisBlock IO – Adds more inputs, outputs, or connectivity options including LTE-M / NB-IoT, cellular and Wi-Fi modules, NFC reader, and interfaces for I2C, UART, ADC, and GPIO. New WisBlock IO and Sensor modules Some modules are available right now, while others have been announced, but just coming soon Here’s a list of the 10 modules available now: RAK12002 – RTC […]

July 1, 2021 by Jean-Luc Aufranc (CNXSoft) - 7 Comments

ThingPulse ESPGateway features not one, but two ESP32 wireless modules

ThingPulse ESPGateway is a WiFi and Bluetooth gateway equipped with two ESP32 modules, two external antennas, and a footprint for an RN2483 LoRaWAN chip. The two ESP32-WROVER modules communicate over UART, and this design allows one ESP32 to transmit data over WiFi or Bluetooth, while the other remains in promiscuous mode, or transmits data using ESPNow low-power proprietary protocol for applications we’ll discuss below. ESPGateway hardware specifications: Wireless connectivity 2x ESP32-WROVER-IB modules with dual-core ESP32 processor, 4MB flash, and 8MB PSRAM Footprint for RN2483 LoRaWAN module connected to one of the ESP32 module 2x external antennas for longer range Expansion – Unpopulated headers to access to 18 GPIO pins, 3.3V, and GND to add sensors, displays, actuators… Debugging – USB-C port for serial console connected to one CP2104 USB to TTL chip plus switch to select ESP1/ESP2 module Misc – 4x WS2812B programmable LEDs, Reset button ThingPulse explains in more […]

June 29, 2021June 29, 2021 by Jean-Luc Aufranc (CNXSoft) - No Comments

M5Stack Atom DTU LoRaWAN Kit also supports WiFi, RS485, Modbus communication

ESP32 WiFI, Bluetooth, LoRaWAN, and RS485 kit

M5Stack is known for its ESP32 based building blocks for the IoT with WiFi & Bluetooth wireless connectivity, I/O headers, and block-specific features like a tiny color display, a speaker, a touchscreen display, a camera, and more. The company’s latest product is the M5Stack Atom DTU LoRaWAN Kit based on ESP32 ATOM Lite, as well as ASR Micro ASR6501 LoRa module (SX1302 based) and one RS485 header that allows for industrial communication notably with the Modbus protocol. M5Stack Atom DTU LoRaWAN Kit specifications: Wireless connectivity M5Stack ATOM Lite with ESP32 WiFi 4 and Bluetooth 4.2/5.x dual-core SoC ASR ASR6501 LoRa chip Operating frequency – 868MHz or 915 MHz Transmit power – Up to +21dBm RX sensitivity – Up to -137dBm (SF=12/BW=125KHz) Serial communication – UART 115200bps (AT command) via ESP32 Antenna – SMA antenna connector Power consumption @ 3.3V (from ASR6501 datasheet) Tx @ +21dBm – 106 mA Rx – […]

June 25, 2021June 25, 2021 by Jean-Luc Aufranc (CNXSoft) - 14 Comments

Pico Wireless Pack adds ESP32 WiFi & Bluetooth module to Raspberry Pi Pico

Pico Wireless Pack for Raspberry Pi Pico

Pimoroni Pico Wireless Pack is an add-on board for Raspberry Pi Pico adding a MicroSD card socket and ESP32 WiFi & Bluetooth module to the popular MCU board. While it’s a nice idea to add wireless connectivity to Raspberry Pi Pico, ESP32 is a dual-core Xtensa LX6 processor clocked at 160 to 240 MHz with WiFi, Bluetooth, and plenty of I/Os that should be able to handle most tasks better than Raspberry Pi RP2040 dual-core Cortex-M0+ processor clocked at 48 MHz by default, although we’ve also seen it overclocked up to 252 MHz. It comes with female headers that allow it to be inserted directly to the back of Raspberry Pi Pico has shown above, or into a “GPIO expander” board like the Pico Omnibus shown below through an SPI interface. Pico Wireless Pack specifications: Wireless module – ESP32-WROOM-32E WiFi 4 & Bluetooth 4.2/5.x module with PCB antenna, 4 MB […]

June 23, 2021 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

LILYGO Mini E-Paper Core combines ESP32 with 1.02-inch ePaper Display in 3D printed enclosure

LILYGO Mini E-Paper Core is another ESP32-based e-Paper display by LILYGO, but it’s a really tiny 1.02-inch e-Paper display housed in a 3D printed enclosure that reminds me of M5Stack Core with a 2-inch TFT LCD. The tiny low-power display also offers a MicroSD card socket, a reset button, a three-way user button, as well as headers for GPIOs, ADC, DAC, SPI, and more. LILYGO Mini E-Paper Core specifications: Wireless SiP – ESP32-PICO-D4 system-in-package with ESP32 dual-core processor, 4MB Flash, 2.4 GHz WIFi 4 & Bluetooth connectivity Storage – MicroSD card socket Display – 1.02-inch e-paper display with 128×80 resolution USB – 1x USB Type-C for power and programming Expansion 7-pin 2.54mm pitch header with 5x GPIO, 2x ADC, 2x DAC, 3.3V, and GND 8- pin 2.54mm pitch header with 4x GPIO, SPI, 1x ADC, 5V, VBUS, VBat, and GND Misc – Three-way toggle button connected to G36, G0, […]