hardkernel News - Page 5 of 14 - CNX Software

December 16, 2020December 17, 2020 by Jean-Luc Aufranc (CNXSoft) - 26 Comments

ODROID-N2+ based “Home Assistant Blue” announced as official hardware for Home Assistant

Home Assistant has announced “Home Assistant Blue” hardware with an enclosure designed by Hahn Werke housing Hardkernel ODROID-N2+ SBC, and software supported by BayLibre who helped upstreaming the code. The goal is to make Home Assistant Blue a fully open-source platform with long-life support. The device was officially announced during the Home Assistant Conference 2020 held a couple of days ago. Home Assistant Blue home automation gateway uses the 4GB DDR4 version of the Amlogic S922X SBC, ships with a 128GB eMMC flash module, and offers Gigabit Ethernet and four USB 3.0 ports. As I understand it, the gateway will run the latest Home Assistant Core 2020.12 that was announced at the conference with a new feature called Blueprints defined as “pre-created automation with user-settable options”, as well as new neural voices for Nabu Casa Cloud TTS (Text-to-Speech), the ability to temporarily disable devices, and more. The release was initially […]

December 15, 2020December 15, 2020 by Jean-Luc Aufranc (CNXSoft) - No Comments

Linux 5.10 LTS release – Main changes, Arm, MIPS and RISC-V architectures

Linus Torvalds has just released Linux 5.10: Ok, here it is – 5.10 is tagged and pushed out. I pretty much always wish that the last week was even calmer than it was, and that’s true here too. There’s a fair amount of fixes in here, including a few last-minute reverts for things that didn’t get fixed, but nothing makes me go “we need another week”. Things look fairly normal. It’s mostly drivers – as it should be – with a smattering of fixes all over: networking, architectures, filesystems, tooling.. The shortlog is appended, and scanning it gives a good idea of what kind of things are there. Nothing that looks scary: most of the patches are very small, and the biggest one is fixing pin mapping definitions for a pincontrol driver. This also obviously means that the merge window for 5.11 will start tomorrow. I already have a couple […]

October 20, 2020October 21, 2020 by Jean-Luc Aufranc (CNXSoft) - 38 Comments

ODROID-HC4 low-cost dual NAS comes with 4GB RAM, supports 2.5-inch and 3.5-inch SATA drives

[Edit: Hardkernel has now updated their documentation to clarify the NAS uses ASM1061 PCIe to SATA controller instead of JMB582] It’s hard to find low-cost NAS platforms often because of the mechanism to insert drives and the enclosure add to the cost. An alternative is to use boards like Hardkernel ODROID-HC1 for 2.5-inch drives or ODROID-HC2 for 2.5- and 3.5-inch drives, but each board supports only one drive. The designs are stackable, but you’d need one Linux board per drive, so it’s not ideal. The Korean company has now launched a new model with ODROID-HC4 powered by an Amlogic S905X3 processor and shipping with a case supporting two 2.5-inch or 3.5-inch SATA drives that will start selling later this month for just $65 and up. ODROID-HC4 specifications: SoC – Amlogic S905X3 quad-core Cortex-A55 processor @ 1.8 GHz with Mali-G31 MP2 GPU System Memory – 4GB DDR4 Storage 128 Mbit SPI […]

July 16, 2020November 8, 2022 by Jean-Luc Aufranc (CNXSoft) - 53 Comments

ODROID-N2 Plus SBC Gets Amlogic S922X Rev. C Processor Clocked at up to 2.4 GHz

Announced in February 2019, ODROID-N2 Amlogic S922X SBC launched the following month with 2GB to 4GB RAM, HDMI 2.0 output, Gigabit Ethernet, multiple USB 3.0 ports with pricing starting at $63 making very good value for an hexa-core Cortex-A73/A53 processor. The company has now announced an upgraded with ODROID-N2 Plus SBC featuring Amlogic S922X Rev.C bringing the Cortex-A73 big core maximum clock frequency from 1.8 GHz to 2.2GHz. But Hardkernel also found out they could overclock the processor up to 2.4 GHz in all 300 boards they have delivered a 33% boost over the original ODROID-N2 board. The Cortex-A53 cores are also a bit faster up to 2.0 GHz. ODROID-N2+ specifications: SoC – Amlogic S922X Rev.C hexa-core big.LITTLE processor with 4x Arm Cortex A73 cores @ up to 2.2/2.4GHz, 2x Arm Cortex A53 cores @ 2.0GHz, Arm Mali-G52 GPU @ 846MHz; 12nm manufacturing process System Memory – 2GB or 4GB […]

June 18, 2020June 18, 2020 by Jean-Luc Aufranc (CNXSoft) - 23 Comments

ODROID-H2+ SBC Gets Celeron J4115 Processor, Offers 2.5GbE Networking

Harkernel ODROID-H2 is an Intel Celeron J4105 Gemini Lake powered SBC that offers great value and performs reasonably well as we’ve seen in our ODROID-H2 Ubuntu review. But there’s an upgraded model coming soon with ODROID-H2+ getting a slightly faster Intel Celeron J4115 processor, 2.5 GbE networking, a couple of extra I/O on the header for USB 2.0 and HDMI CEC, and a change to the 12V SATA power circuit to improve the suspend-resume power control sequence of 3.5″ HDDs. ODROID-H2+ specifications: SoC – Intel Celeron J4115 Gemini Lake Refresh quad-core processor @ 1.8 GHz / 2.5 GHz (turbo single thread) / 2.3Ghz (turbo multi-thread) with 12EU Intel UHD Graphics 600 up to 700 MHz; Noted listed on Ark Intel just yet, but it’s real. System Memory – Dual-channel Memory DDR4-PC19200 (2400MT/s) supporting up to 32GB RAM in total Storage – M.2 PCIe 2.0 x4 slot for one NVMe storage, […]

May 3, 2020May 3, 2020 by Jean-Luc Aufranc (CNXSoft) - 10 Comments

ODROID-Go Advance Black Edition Gets WiFi, R2/L2 Button, and USB-C Power Input

At the end of last year, Hardkernel launched ODROID-GO Advance portable Linux retro game console powered by a Rockchip RK3326 processor with 1GB RAM, and a 3.5″ color display. While it was fairly well-received, people wished it would not come with a large power barrel jack and included WiFi among a few other requests. COVID-19 also delayed mass-production of the device, but the silver lining is that the company decided to make a new revision 1.1 PCB with a USB-C port for power input, a WiFi module, and R2 and L2 buttons that’s planned to launch soon under the name ODROID-Go Advance Black Edition. ODROID-Go Advance Black Edition specifications: SoC – Rockchip RK3326 quad-core Arm Cortex-A35 processor @ 1.3GHz with Mali-G31 MP2 GPU System Memory – 1GB DDR3L @ 786Mhz, 32 Bits bus width Storage – 16MB SPI Flash for bootloader, Micro SD Card slot (UHS-1 Capable interface) Display – […]

April 24, 2020April 26, 2020 by Jean-Luc Aufranc (CNXSoft) - 68 Comments

Raspberry Pi 4 vs ODROID-C4 Features Comparison

Yesterday, Hardkernel launched ODROID-C4 Amlogic S905X3 SBC as an update to ODROID-C2 SBC launched in 2016. We’ve seen the board can compete with Raspberry Pi 4 4GB board thanks to benchmarks released by Hardkernel, but since those boards are so versatile, meaning they can be used in a variety of applications, it’s impossible to benchmark all use cases. One way to find out which board might be right for your application without going through benchmarks is to look at a list of features for each, and that’s exactly what we’ve done in this post. Let’s get straight to the Raspberry Pi 4 (4GB RAM) vs ODROID-C4 comparison table. Features/Specs Raspberry Pi 4B (4GB) ODROID-C4 Release date 24th June 2019 23rd April 2020 SoC Broadcom BCM2711 quad-core Cortex-A72 @ 1.5 GHz (overclockable to 2.0+ GHz) with NEON, FPU Amlogic S905X3 quad-core Cortex-A55 processor @ 2.0 GHz with NEON, FPU, Armv8 Crypto […]

April 23, 2020April 24, 2020 by Jean-Luc Aufranc (CNXSoft) - 107 Comments

$50 ODROID-C4 Raspberry Pi 4 Competitor Combines Amlogic S905X3 SoC with 4GB RAM

Hardkernel has just launched an update to its ODROID-C2 board, with ODROID-C4 SBC equipped with a 2.0 GHz Amlogic S905X3 quad-core Cortex-A55 processor combined with up to 4GB RAM, four USB 3.0 ports, Gigabit Ethernet, HDMI 2.0 video output, and the usual 40-pin I/O header. That makes it a worthy competitor to Raspberry Pi 4 with 4GB RAM, especially since it supports Ubuntu 20.04, CoreELEC, Android 9, and LineageOS operating systems, and comes with a proper heatsink for cooling for just $50 plus shipping. ODROID-C4 specifications: SoC – Amlogic S905X3 quad-core Cortex-A55 processor @ 2.0GHz with Arm Mali-G31MP2 GPU supporting OpenGL ES 3.2, Vulkan 1.0 and OpenCL 2.0 System Memory – 4GB DDR4 Storage 1x eMMC connector (8/16/32/64GB modules available) 1x Micro SD slot with support for DS/HS mode up to UHS-I SDR104 Video & Output – HDMI 2.0 port up to 4K@60Hz with HDR, CEC, EDID Audio – Digital […]