ics

Posted on by Jean-Luc Aufranc (CNXSoft) - 7 Comments on Diyomate A5 Dual Core Android Set-Top Box Powered by Infotmic iMAPx820 Processor

Diyomate A5 Dual Core Android Set-Top Box Powered by Infotmic iMAPx820 Processor

I’ve been tipped off about a new Android set-top box – Diyomate A5 Dual Core – that features Infotmic iMAPx820 dual core A5 SoC @ 1 GHz with Mali-400 GPU, 1 GB RAM & 4 GB Flash, and runs Android 4.0.3. Here are the specs of this media player: SoC – Infotmic 820 dual Cortex-A5 + dual core Mali-400 GPU System Memory – 1GB DDR3 Storage – 4GB  NAND Flash + SD card socket Video Output – HDMI and composite Audio Output – HDMI and Stereo audio output Video Codecs – H.263, MPEG1/2, MPEG-ASP, MPEG-AVC(H.264), VC-1, RV, AVS, MJPEG/JPEG, VP8, MVC, VP6(FLV), ETC Audio Codecs  – MP3, WMA, M4A (AAC), WAV, OGG, LPCM, FLAC, AC3 and DTS Connectivity: Ethernet – 10/100Mbps Wi-FI – 802.11 b/g/n USB – 2x USB 2.0 Host ports Power supply – 5V/2A AC Adaptor Dimension – 98*98*20 mm Weight – 160 grams Beside featuring 2 Cortex A5 cores up to […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 2 Comments on ZOPO ZP900S Leader Smartphone Unboxing and Review

ZOPO ZP900S Leader Smartphone Unboxing and Review

I’ve just received ZOPO ZP900S smartphone from Pandawill by Fedex. This phablet features a 5.3″ display, MediaTek MTK6577 dual core cortex A9 processor with 512 MB RAM, 4GB flash and runs Android 4.0 (upgradable to Android 4.1 once the firmware is released). This is the lite version of ZOPO ZP900 which comes with 1GB RAM. Both devices look like low cost versions of the Samsung Galaxy Note as you can see from the comparison table below between ZOPO ZP900S, ZOPO ZP900 and Samsung Galaxy Note N7000. ZOPO ZP900S & ZP900 Specifications ZOPO ZP900S Leader ZOPO ZP900 Leader Samsung Galaxy Note CPU Mediatek MTK6577 @ 1GHz Samsung Exynos 4210 @ 1.4 GHz GPU POWERVR SGX531T ARM Mali-400MP RAM 512 MB 1GB 1GB Storage 4 GB Flash + microSD 16GB/32GB Flash + microSD Display 5.3″ IPS 960×540 (qHD) 5.3″ super AMOLED 1280×800 Camera 8MP Rear, 2MP Front 8MP Rear, 2MP Front Wi-Fi […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 27 Comments on Jesurun Xplus H25 Mini PCs with Rotating HDMI Port, DLNA Support

Jesurun Xplus H25 Mini PCs with Rotating HDMI Port, DLNA Support

Jesurun Xplus H25 mini PCs are typical Android 4.0 AllWinner A10 and Rockchip RK3066 mini PCs, expect for one slight mechanical difference: The HDMI male port can rotate and possibly allow the mini PC to be inserted directly into the TV in case where other may not. Of course, one option could always be to buy a cheap HDMI rotating adapter or an HDMI cable to connect the device, but I find having this option within the device is neater. Let’s look at the specs of the single core version: SoC – AllWinner A10 with Mali-400 GPU System Memory – 1GB RAM Storage – 4GB NAND Flash + TF card slot USB – 1x USB 2.0 OTGX + 1x  USB HOST + 1x mini USB HOST WiFi – 802.11b/g/n Video Container Formats – AVI, MKV, TS, TP, TRP, M2TS, MPG, MP4, M4V, MOV, VOB, MVC(3D) ISO, IFO, DAT, WMV, ASF/RM, […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 9 Comments on $444 Smartbeam Android 4.0 Media Player & Projector Powered by Telechips TCC8925

$444 Smartbeam Android 4.0 Media Player & Projector Powered by Telechips TCC8925

Android is now everywhere, from the ubiquitous smartphones and tablets to cars, cameras, satellites (no kidding), light bulbs (seriously) and more. Today is the first time I’ve come across a full sized projector running Android. The “Smartbeam” is a 2000 lumens 1280×768 (native) projector powered by Telechips TCC8925 with 512 MB RAM and 4 GB Flash running Android 4.0.4 (ICS), so the performance should be very similar to CX-01 mini PC. Here are the specs of this new device: SoC – Telechips TCC8925 up to 833 MHz System Memory – 512 MB RAM Storage – 4 GB NAND Flash WiFi – 802.11 b/g/n Display – 5.8″ Single LCD Panel Display Technology (cnxsoft: But I can’t find any display on any of the pictures…) Projector: Projection Lens – Manual Lens Resolution: Native SGA (1280*768 Pixels), Support Resolution QGA (1920 x 1200) Brightness (Typical) – LED lamp 2000 lumens, more than 320Lux […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 10 Comments on Variscite VAR-SOM-MX6 Freescale i.MX 6 Solo, Dual and Quad System on Modules Start at $59

Variscite VAR-SOM-MX6 Freescale i.MX 6 Solo, Dual and Quad System on Modules Start at $59

Variscite has unveiled a new series of system on modules powered by Freescale i.MX6 Solo, Dual, DualLite and Quad processors with 512 to 2048 MB DDR3 RAM, and 128 to 1024MB SLC NAND Flash. Here are the modules key features: SoC – Freescale i.MX 6 series SoC (Single/Dual /Quad ARM® Cortex™-A9 Core, 1.2 Ghz) System Memory • Up to 16 Gb DDR3 RAM Storage – Up to 8 Gb NAND Flash for storage memory/boot Video Output: 2 x LVDS display interface HDMI V1.4 i nterface 1 x MIPI DSI Touch panel interface Camera – Parallel & serial camera interface (CSI) Connectivity On-board 10/100/1000 Mbps Ethernet PHY WLAN (802.11 b/g/n) Bluetooth 2.1 + EDR USB – 1 x USB 2.0 host, 1 x OTG Audio – Stereo line -In/out, digital & analog microphone, and S/PDIF In/Out Other interfaces: 2 x SD/MMC Serial interfaces ( SPI , I2C, UART, I2S,) 2x CAN […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 19 Comments on $100 Mele A1000G / A2000G Android Media Players with 1GB RAM and 8GB Flash

$100 Mele A1000G / A2000G Android Media Players with 1GB RAM and 8GB Flash

I’ve been asked by several people when there would be a Mele with 1GB RAM, well the time is now, with the Mele A1000G and Mele A2000G. Both appear to be based on the previous Mele A1000 and Mele A2000 set-top boxes, but feature 1 GB RAM and 8 GB Flash instead of 512 MB RAM and 4 GB Flash. Here are Mele A1000G & Mele A2000G Specifications: SoC – AllWinner A10 Cortex A8 processor @  1GHz System Memory – 1 GB DDR3 Storage: 8GB NAND Flash  SD card slot (up to 32 GB) Connectivity: Wi-Fi – 802.11 b/g 10/100 MB Ethernet USB – 3 USB Host ports SATA Interface for 2.5″ HDD Video Output – HDMI, composite and VGA. Audio Output –  RCA stereo output and optical out (SPDIF) Audio Formats – MP3 / WMA / WAV / OGG / FLAC / MKA Video Formats – TS / M2TS […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 9 Comments on PengPod 700 & 1000 – Linux Tablets Based on AllWinner A10

PengPod 700 & 1000 – Linux Tablets Based on AllWinner A10

There are plenty of tablet based on AllWinner A10 and A13 processors, but all of them run Android, and you are out of luck if  you want to run Linux on your tablet, unless you hack this yourself. But this is about to change as PengPod will launch 2 tablets and 1 mini PC running Linux from NAND flash or micro SD card: PengPod 700 – 7″ tablet with Allwinner A10, 1GB RAM and 8GB Flash PengPod 1000 – 10″ tablet with AllWinner A10, 1GB RAM and 8GB Flash PengStick – AllWinner A10 mini PC with 1GB RAM and 4 GB Flash The table below gives more detailed specifications and comparison of the three devices. Device PengPod1000 PengPod700 PengStick Type Tablet Tablet TV Stick CPU Allwinner A10 AllWinner A10 AllWinner A10 Android 4 4 4 Linux 3.0.42 3.0.42 3.0.42 Screen 10” 7” External Resolution 1024×600 800×480 1080i Ram 1GB 1GB […]

Posted on by Jean-Luc Aufranc (CNXSoft) - No Comments on TI and AllGo Embedded Launch E-Tab Tablet Reference Design Powered by TI AM3354 Processor

TI and AllGo Embedded Launch E-Tab Tablet Reference Design Powered by TI AM3354 Processor

Texas Instruments and Allgo Embedded jointly announced the availability of E-Tab, a tablet reference design based on Cortex A8 Sitara AM3354 processor that targets the healthcare, logistics, retail and education markets as well as hotels and restaurants. Here are the tablet reference designs specifications: Processor –  TI’s AM3354 ARM Cortex-A8 microprocessor (up to 1 GHz) Operating System – Android ICS 4.0 System Memory – 512 MB DDR3 RAM Storage – 512 MB Nand Flash and 4GB Micro SD card Display –  7″ WVGA TFT LCD with 5-Touch Capacitive Touch panel Audio –  Stereo Headphone, Internal MIC and Internal Mono Speaker Connectivity: WiFi 802.11 b/g/n + BT 2.1 Module Bluetooth 2.1 + EDR Ethernet 10/100Mbps (Optional) Camera – Internal USB Camera Module (Optional) USB Interfaces – USB High Speed Host Port and USB OTG (ADB and Debug purpose) Key/Button – Single Button for Back and Home screen, Reset Switch and Power […]