IoT

Posted on by Jean-Luc Aufranc (CNXSoft) - No Comments on Qualcomm unveils Snapdragon X80 5G modem with NB-NTN satellite connectivity, AI Hub, and FastConnect 7900 WiFi 7 chip

Qualcomm unveils Snapdragon X80 5G modem with NB-NTN satellite connectivity, AI Hub, and FastConnect 7900 WiFi 7 chip

Snapdragon X80 5G modem satellite

Mobile World Congress 2024 (MWC 2024) has just started, and Qualcomm had three major announcements with the introduction of the Snapdragon X80 5G modem with NB-NTN satellite connectivity, the Qualcomm AI Hub with over 75 AI models optimized for Snapdragon processors, and the FastConnect 7900 WiFi 7, Bluetooth, and Ultra Wideband (UWB) chip. Snapdragon X80 5G modem-RF system Snapdragon X80 5G modem specifications: Peak download speed – 10 Gbps Peak upload speed – 3.5 Gbps Cellular Modem-RF Specs – 10CC aggregation in mmWave, 5CC aggregation in 5G sub-6GHz Cellular Technology 5G NR, sub-6 GHz Dynamic Spectrum Sharing (DSS) LTE, WCDMA, LAA, TD-SCDMA, GSM/EDGE, CBRS mmWave, sub-6 carrier aggregation (FDD-FDD) sub-6 carrier aggregation (TDD-TDD), 5G FDD, 5G TDD, sub-6 carrier aggregation (FDD-TDD) 5G SA (standalone), 5G NSA (non-standalone) F + F ULCA, FDD UL MIMO, Switched Uplink, 3GPP R18-ready (5G Advanced-ready), 6x CA sub-6 downlink carrier aggregation, 1024-QAM sub-6, FR1 + […]

Posted on by Debashis Das - No Comments on Nordic nRF9151 – A smaller LTE-M/NB-IoT and DECT NR+ SiP with enhanced power efficiency and security

Nordic nRF9151 – A smaller LTE-M/NB-IoT and DECT NR+ SiP with enhanced power efficiency and security

Nordic’s New nRF9151 DECT NR+ SiP Module

Nordic Semiconductor has announced the availability of its new nRF9151 SiP module adding to the nRF91 cellular IoT lineup. This new module includes a 64MHz Arm Cortex-M33 SoC, LTE-M/NB-IoT connectivity with a radio-frequency front-end (RFE) for cellular support, and DECT NR+ connectivity. All this comes with a 20% smaller footprint and additional support for Power Class 5 20 dBm alongside Class 3 (23 dBm) compared to the Nordic nRF9161 SiP module also designed to power cellular IoT and non-cellular 5G solutions that was introduced just last month. Nordic nRF9151 SiP module specification: Processor and Memory – 64 MHz Arm Cortex-M33, 1 MB flash, and 256 KB SRAM. Modem – Integrated LTE-M/NB-IoT and DECT NR+ with support for 3GPP Release 14 LTE-M/NB-IoT. Location Tracking – Built-in GNSS receiver and support for cellular-based location features. Security – Arm TrustZone, CryptoCell for cryptographic operations, true random number generator (TRNG). Power Options – Supports […]

Posted on by Tomisin Olujinmi - 1 Comment on Particle’s M-series multi-radio devices connect anywhere with WiFi, cellular, NTN satellite, and LoRaWAN connectivity

Particle’s M-series multi-radio devices connect anywhere with WiFi, cellular, NTN satellite, and LoRaWAN connectivity

Particle M-series M-SoM versions

Particle Industries Inc., an IoT Platform-as-a-Service company, has announced a new line of multi-radio boards and modules that offer multiple connectivity options in a single product. Particle is a complete edge-to-cloud IoT development platform that offers hardware products and software tools for creating IoT solutions. The company’s latest product, the M-series, has a bold tagline: connect anywhere. Although wireless connectivity has come a long way, there is no single wireless technology that works everywhere. Particle’s M-series aims to address that problem by bundling multiple radios – Wi-Fi, cellular, satellite, and LoRaWAN – into one product. Particle is looking to expand from its two primary wireless technologies: Wi-Fi and cellular, and add two more radios, satellite and LoRaWAN, for broader coverage. These two radios will cover devices in areas such as enclosed spaces (boiler rooms, elevator shafts, basements, and mines) and remote locations (methane sensors in oil and gas plants, boats, […]

Posted on by Tomisin Olujinmi - 11 Comments on Spark Analyzer is a USB-C PD analyzer and power supply based on ESP32-C3 (Crowdfunding)

Spark Analyzer is a USB-C PD analyzer and power supply based on ESP32-C3 (Crowdfunding)

spark analyzer front back

Spark Analyzer is an ESP32-C3-powered device built to streamline the process of developing and debugging USB-C Power Delivery (UCPD) solutions. The board’s design is simple, compact, and includes helpful power delivery and analysis functionality, at an affordable price. Spark Analyzer runs on an ESP32-C3FH4 microcontroller, a low-power SoC with a single-core RISC-V CPU with onboard 2.4 GHz Wi-Fi and Bluetooth 5 (Low Energy) connectivity. The wireless chip lets users control the Spark Analyzer and monitor its operation remotely. It also supports integration with other smart devices via Matter.  The device allows you to adjust voltage output from 5V to 20V, depending on your project requirements. Power is sent to a connected device via the two-pin screw terminal block on the device, and a Cross Chip sensor measures the electrical current sent through the device using Hall effect. It includes a software safety feature that turns off the output field-effect […]

Posted on by Debashis Das - 3 Comments on Waveshare ESP32-S3 4G dev boards feature LTE Cat-1, 2G, and camera support

Waveshare ESP32-S3 4G dev boards feature LTE Cat-1, 2G, and camera support

ESP32 S3 4G Dev Boards

Waveshare has recently launched two new ESP32-S3 4G dev boards – the ESP32-S3-SIM7670G-4G and the ESP32-S3-A7670E-4G. These boards support 4G LTE Cat-1, Wi-Fi, Bluetooth, and GNSS, and come with an OV2640 camera, and a battery holder for a 18650 battery. The main difference between the two is that the A7670E module also supports 2G GSM/GPRS/EDGE at 900/1800MHz while the SIM7670G module does not. The board has two rows of I/Os including GPIO, I2C, SPI, ADC, and USB 2.0. It also has a USB-C port for power and programming, a slot for a MicroSD card, and an option to connect an external speaker. There’s a USB switching IC and DIP switch for easily connecting the module to a PC for internet or debugging. Waveshare ESP32-S3 4G Dev Boards Specification: Communication module A7670E 4G – A7670E Cat-1 4G module supporting 4G Cat-1 + 2G networking, GNSS positioning, telephone calls, and SMS. SIM7670G […]

Posted on by Debashis Das - No Comments on SparkFun launches MicroMod Single Pair Ethernet kit for easier 10BASE-T1L experimentation

SparkFun launches MicroMod Single Pair Ethernet kit for easier 10BASE-T1L experimentation

SparkFun MicroMod Single Pair Ethernet Kit

The SparkFun MicroMod Single Pair Ethernet Kit utilizes the ADIN1110 transceiver for 10BASE-T1L communication, enabling long-distance connectivity over a single twisted pair cable. Things get easier as SparkFun has designed the module to be compatible with the MicroMod ecosystem, which allows for testing connections between industrial devices over long distances, up to 1,700 meters. The standout feature of this board is its ADIN1110 transceiver, which supports 10BASE-T1L Ethernet. This technology uses a single twisted pair for lightweight, long-distance data transmission, achieving speeds up to 10Mbps by the 802.3cg IEEE standard, all without delivering power over the cable. SparkFun MicroMod Single Pair Ethernet Kit Specification: 2x SparkFun MicroMod Single Pair Ethernet Function boards 10BASE-T1L IEEE Standard 802.3cg-2019 Compliant Transceiver Single-pair Ethernet transmission at speeds up to 10Mbps 1km transmission distance (1.7km max cable reach) Supply Voltage of 1.8V or 3.3V 2.4V transmission amplitude Integrated MAC connects via SPI – Supports 16 MAC addresses Supports both […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 2 Comments on Digi IX40 5G edge computing industrial IoT cellular gateway is designed for Industry 4.0 use cases

Digi IX40 5G edge computing industrial IoT cellular gateway is designed for Industry 4.0 use cases

Digi IX40 5G industrial cellular IoT gateway

Digi IX40 is a 5G edge computing industrial IoT cellular router solution designed for Industry 4.0 use cases such as advanced robotics, predictive maintenance, asset monitoring, industrial automation, and smart manufacturing. The IIoT gateway is based on an NXP i.MX 8M Plus Arm processor running a custom Linux distribution, and besides 5G and 4G LTE cellular connectivity, offers gigabit Ethernet networking with 6 RJ45 and SFP ports, GNSS for geolocation and time, as well as digital and analog I/Os and an RS232/RS422/RS485 serial interface supporting Modbus. Digi IX40 specifications: SoC – NXP i.MX 8M Plus Arm Cortex-A53 processor @ 1.6 GHz with 2.3 TOPS NPU System Memory – 1GB RAM Storage – 8GB eMMC flash Wireless Cellular  IX40-05 5G NSA, 5G SA, 4G LTE-ADVANCED PRO CAT 19 5G NR bands – n1, n2, n3, n5, n7, n8, n12, n13, n14, n18, n20, n25, n26, n28, n29, n30, n38, n40, n41, […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 4 Comments on SparkFun Thing Plus – ESP32-C6 board comes with 16MB flash, LiPo battery support

SparkFun Thing Plus – ESP32-C6 board comes with 16MB flash, LiPo battery support

SparkFun Thing Plus ESP32-C6

SparkFun has launched yet another ESP32-C6 board with the “Thing Plus – ESP32-C6”  based on the ESP32-C6-WROOM-1-N16 module with 16MB flash and a PCB antenna and  range of I/Os and power options. The board features 28 through holes with up to 23 multi-function GPIOs and a Qwicc connector for expansion, and supports 5V or LiPo battery power through respectively a USB-C port a 2-pin JST connector combined with a charging chip, and a fuel gauge. SparkFun Thing Plus – ESP32-C6 specifications: Wireless module – ESP32-C6-WROOM-1-N16 MCU – ESP32-C6 32-bit single-core RISC-V microcontroller with 2.4 GHz WiFI 6, Bluetooth 5 LE, and 802.15.4 radio (Zigbee and Thread); Matter-compatible Storage – 16 MB flash PCB Antenna Storage – MicroSD card slot USB – 1x USB Type-C port for power and programming Expansion 12-pin + 16-pin headers with 23x multifunctional GPIOs Up to 7x 12-bit ADC channels Up to 2x UART channels (with […]

Exit mobile version