jynxbox News - CNX Software - Embedded Systems News

June 26, 2014March 8, 2015 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

Giveaway Week Winners Announced

Regular readers will know that I organized a giveaways last week, with Linux and Android based TV boxes and TV dongles based on Amlogic, Rockchip, and Telechips processors, a total of 8 devices with a combined value closed to $1,000 if purchased new. I’ve now selected all the winners, and send the devices, so it may be nice to list them in one post, even I announced each individual winners in the comment section of each contest. Without further delays, let’s go through the winners and their country of residence, with links to the original individual winner announcements: Jynxbox M1V2 Pure Linux Richard, USA (Facebook contest) Pavlos, Greece (Comment contest) Mele X1000 – Vedas, USA Measy U2C – Umaar, Germany Matricom Gbox Midnight MX2 – Starsolaris, Ukraine Beelink A9 – Alcides, Brazil Jynxbox Live – Greg, Canada Tronsmart Prometheus – Roberto, Portugal All parcels have been sent today by Airmail […]

June 21, 2014June 23, 2014 by Jean-Luc Aufranc (CNXSoft) - 89 Comments

Giveaway Week – Jynxbox Live TV Streaming Box

The sixth prize of this giveaway week on CNX Software will be Jynxbox Live. It’s a standard Android TV box based on Rockchip RK3066 dual core processor, except it has software that normally allowing live streaming of about 300 TV channels around the world, and sells at a steep price compared to Android media player based on similar hardware. However after installing the Live TV app, which is not included when the box ships, possibly due to legal reasons, I could only load 10 TV channels, and none of them would play. I’m not exactly sure why, maybe their server is blocked from Thailand, as other users reported the box worked just fine. There’s no Google Play store pre-installed in the box, only Jynx Market with a limited number of applications, so you may have to install another market (Amazon, Yandex, Google Play..) by yourself. To enter the draw simply […]

June 16, 2014June 18, 2014 by Jean-Luc Aufranc (CNXSoft) - 87 Comments

Giveaway Week – Jynxbox M1V2 Pure Linux XBMC

When Theaterinabox sent me a Jynxbox M1V2 for review, I was a little surprised to actually receive two. The reason was that I got one for review, one for giveaway. But since I need to drive to the post office anyway, I’ll just giveaway both, and actually start a giveaway week giving 8 different boxes to my readers starting today with the two Jynxbox M1V2, then one a day until Sunday. Let’s talk about the device a bit more. Jynxbox M1V2 is one of the few Linux based XBMC available on the market. It’s based on Amlogic AML8726-M3 Cortex A9 processor, with 1GB RAM and 2GB flash, with several XBMC add-ons pre-installed. You can read my review to get the detailed specs, and pictures. The conclusion of my testing was that the user interface was pretty smooth considering the low end processor, Wi-Fi was excellent, and I was pleasantly surprised […]

June 3, 2014June 3, 2014 by Jean-Luc Aufranc (CNXSoft) - 30 Comments

Jynxbox M1V2 Pure Linux XBMC Media Player Review

Theaterinabox.tv has sent me Jynxbox M1V2 TV box running XBMC Linux Gotham 13.0, and powered by Amlogic AML8726-M3 processor @ 1 GHz with 2GB Flash and 1 GB RAM. This is an upgrade of the first version featuring AML872-M1 and 512 MB RAM. I’ll go through the specs first, then show some unboxing pictures and video, and complete this post by reviewing the device by playing videos from the network and a USB flash drive, as well as going through the available add-ons in a video review. Jynxbox M1V2/M1+ Specifications Here are the specifications listed for Jynxbox M1V2 Pure Linux, aka Jynxbox M1+: SoC – Amlogic AML8726-M3 @ 1GHz with Mali-400 GPU System Memory – 1GB RAM Storage – 2GB NAND flash + micro SD card reader (up to 32GB) Video & Audio Output – HDMI up to 1080p (default: 720p) Video Codecs & Containers- MPEG 1/2/4, H.264, X264, VC-1, WMV, M2TS, TS, RMVB, […]

December 27, 2013 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

Mini Review of Jynxbox Live, a $350 Android Live TV Streaming Box

A few days ago I showed some unboxing pictures and videos for Jynxbox Android M6 and Jynxbox Live, followed by Jynxbox Android M6 review, and today I’ll quickly review Jynxbox Live, an Android TV Box that based on Rockchip RK3066 (full specs available in unboxing post) that can stream over 200 live TV channels after install a Live TV app / crack, and happens to cost a “mere” $350 allegedly because it give access to these live TV channels. From the outside, Jynxbox Live looks very much like any other Android TV box, with HDMI, Ethernet, S/PDIF, three USB ports, a micro SD slot, a few LEDs, and a Wi-Fi antenna. To get started I’ve connected the provided HDMI cable to the box and my TV, as well as an Ethernet cable, before powering up the device with the USB power supply. After a few seconds wait, you’ll get the […]

December 20, 2013July 2, 2014 by Jean-Luc Aufranc (CNXSoft) - 10 Comments

Jynxbox M6 Android TV Box Review

I’ve shown some unboxing pictures and video of Jynxbox Android M6 earlier this week, and today I’ll write a review of this AMLogic AML8726-M6 dual core Android media player. I’ll start with my first impressions, go through the different settings, test video playback, wi-fi performance, and reports about different miscalleous tests: Bluetooth, USB mass storage, USB webcam, etc… First Boot, Settings and First Impressions First, you’ll need to insert the provided AAA batteries in to the remote control. Opening the remote is a bit tricker than I would like as the cover does not come off that easily. Before powering up the device, I’ve connected the provided HDMI cable between the device and my HDTV, and an Ethernet cable to my hub. The first Ethernet cable would not click with in the device RJ45 connector, although it works with my laptop and other devices, but using another one worked just fine. Connecting […]

December 17, 2013December 20, 2013 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

Jynxbox Android M6 and Jynxbox Live Android TV Players Unboxing Pictures and Videos

I’ve just received two new devices from theatertvbox.tv, namely Jynxbox Android M6 and Jynxbox Live. Both are Android media player, with the former being a more traditional AMLogic AML8726-MX based Android TV Box with XBMC, and the later being an Internet media streamer based on Rockchip RK3066 that focuses on playing online content from services such as Hulu or Netflix. Today, I’ll start with listing specifications, and showing some unboxing pictures and videos for both players, and write a complete detailed review, at least for the M6, in a few days. Jynxbox Android M6 The device’s specifications are somewhat similar to other AML8627-MX boxes such as Matricom G-Box Midnight MX2 or Tronsmart Prometheus: SoC – AMLogic AML8726-MX dual core ARM Cortex A9 @ 1.5GHz with Mali-400MP2 GPU System Memory – 1GB RAM Storage – 4GB NAND flash + microSD/SDHC slot (up to 32GB) Video Output – HDMI 1.3 and CVBS […]

November 18, 2013November 21, 2013 by Jean-Luc Aufranc (CNXSoft) - 16 Comments

$90 JynxBox M1 Pure Linux XBMC Network Media Streamer

After The Little Black Box (TLBB), there’s now another ARM based media player that comes pre-installed with XBMC Linux: Jynxbox M1 Pure Linux. The device is based on AMLogic AML8726-M1 single core Cortex A9 processor @ 800MHz, and comes with 2GB flash, Wi-Fi and Ethernet connectivity, HDMI output, and more. Jynxbox M1 Pure Linux specifications: SoC – AMLogic AML8726-M1 single core Cortex A9 @ 800MHz with ARM Mali-400 GPU System Memory – N/A (but likely 512 MB) Storage – 2 GB Nand Flash + micro SD/SDHC memory slot (Up to 32GB) Video Output – HDMI 1.3 Audio Output – HDMI Video container formats – AVI, RM/RMVB, MKV, WMV, MOV, MP4, WEBM, DAT(VCD format), VOB(DVD format), MPEG, MPG, FLV, ASF, TS, TP, 3GP Audio formats – MP3, WMA, WMV, APE, OGG, FLAC, AAC, etc… Connectivity – 10/100M Ethernet + 802.11 b/g/n Wi-Fi USB – 3x USB 2.0 host ports Misc – […]