Linux News - Page 189 of 434 - CNX Software

February 22, 2019February 22, 2019 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

4Kopen UHD Video Development Platform Features STMicro STiH418 Media Processor

Back in 2016, I read news about STMicro exiting the set-top box chipset market, so I just assumed all their STiHxx processors would be phased out, and I was surprised to come across 4Kopen, described as an open 4K UHD video development platform powered by STMicro STiH418 media processor, especially it was just showcased at 2019 Integrated Systems Europe (ISE 2019) at the beginning of the month. The development board comes with 2 GB RAM, HDMI 2.0 output, HDMI 1.4 input, Gigabit Ethernet, USB 3.0, a mini PCIe slot fitted with an 802.11b/g/n WiFi module, an eSATA connector and more. 4Kopen (B2264) hardware specifications: SoC – STMicro STiH418 quad-core Arm Cortex-A9 processor @ 1.2 GHz, quad-core Mali-400 GPU, and 4x ST231 DSP (Each Core Quad issue) @ 650 MHz System Memory – 2 GB DDR3 @ 2133 MHz Storage – micro SD socket, eSATA port Video & Audio I/O Output […]

February 22, 2019February 22, 2019 by Jean-Luc Aufranc (CNXSoft) - 13 Comments

balenaFin Raspberry Pi CM3+/Lite Developer Kit Launched for $179 and Up

Balena.io – previously known as resin.io – first unveiled Resin.io Project Fin in March 2018. The carrier board for Raspberry Pi CM3L was designed with the aim of easing the management of fleets of connected devices thanks to ResinOS operating systems and the ability to deploy apps packaged in containers through their balenaCloud service. The project had been renamed to balenaFin a little while ago, and the company has now announced availability of balenaFin 1.1 developer kit with various improvements including support for PoE, dual camera, and Raspberry Pi CM3+/Lite module. balenaFin v1.1 carrier board specifications with improvements highlighted in bold: Supported SoM Raspberry Pi Compute Module 3 Lite with Broadcom BCM2837 quad-core ARM Cortex A53 processor at 1.2GHz, 1GB RAM Raspberry Pi Compute Module 3+/Lite with Broadcom BCM2837B0 quad-core ARM Cortex A53 processor at 1.2GHz, 1GB RAM Storage – 8, 16, 32, or 64 GB industrial grade eMMC 5.1 […]

February 21, 2019 by Jean-Luc Aufranc (CNXSoft) - 7 Comments

STMicro STM32MP1 Cortex A7/M4 MPU Supports Linux and Android

When Linux 4.17 was released last June, we discovered an interesting new STM32 part: STM32MP157C dual core Cortex-A7 processor. It was the first time I saw an STM32 IC not based on Arm Cortex-M microcontroller core, but we knew only very little details at the time. STMicro has now made it official, and introduced STM32MP1, the first STM32 MPU (Microprocessor Unit) that features one or two Arm Cortex-A7 cores running Linux, as well as an Arm Cortex-M4 real-time core that allows to re-use code from existing STM32 projects. STM32MP1 key features and specifications: Cores Single or Dual Cortex-A7 core(s) running at 650 MHz with 32-Kbyte L1 Instruction cache, 32-Kbyte L1 Data cache, 256-Kbyte Level 2 cache Cortex-M4 core running at 209 MHz with single-precision floating point unit (FPU), digital signal processor (DSP) instructions, and memory protection unit (MPU) GPU (STM32MP157 only) – Vivante 3D GPU with OpenGL ES 2.0 support; […]

February 20, 2019 by Jean-Luc Aufranc (CNXSoft) - 14 Comments

CompuLab UCM-iMX8M-Mini is a Stamp Size i.MX 8M Mini SoM

We’ve recently written about several new hardware platforms based on the latest NXP i.MX 8M Mini processor family including Nitrogen8M_Mini SBC and F&S Elektronik PicoCore MX8MM SoM. Thanks to a new 14-nm process, the new family has the advantage of consuming less power, and the Cortex-A53 cores can run at a higher frequency. They should cost less as well thanks to cost-saving measures like the adoption of a 1080p video decoder instead of a 4K decoder found in the older NXP i.MX 8M family. CompuLab has now launched their own NXP i.MX 8M Mini SoM with UCM-iMX8M-Mini module that’s about the size of a largish stamp (38 x 28 mm) suitable for portable and space constrained applications such as professional handheld devices, wearable healthcare monitors and medical devices, autonomous drones with visual object recognition, or portable instrumentation equipment with advanced HMI. CompuLab UCM-iMX8M-Mini SoM specifications: SoC (one or the other) […]

February 20, 2019February 20, 2019 by Jean-Luc Aufranc (CNXSoft) - 28 Comments

NanoPi R1 is an Allwinner H3 Gateway with Dual Ethernet, WiFi and Bluetooth

A couple of years ago, Shenzhen Xunlong Software launched Orange Pi R1 board powered by Allwinner H2+ processor with two Fast Ethernet ports, and some I/Os which could be useful for intelligent controllers and simple IoT gateways. FriendlyElec has now launched a similar, but improved product with their NanoPi R1 featuring Allwinner H3 processor coupled with 512MB or 1GB memory, two Ethernet ports, WiFi and Bluetooth connectivity, packaged in a neat metal case. NanoPi R1 specifications: SoC – Allwinner H3 quad-core Arm Cortex-A7 processor @ up to 1.2GHz with Mali-400MP2 GPU System Memory – 512MB or 1GB DDR3 RAM Storage – MicroSD Slot, optional 8GB eMMC flash Connectivity 1x Gigabit Ethernet, 1x Fast Ethernet 802.11b/g/n WiFi 4 with SMA antenna interface Bluetooth 4.0 dual mode (Classic / LE) USB – 2x USB Type-A host ports, 1x micro USB OTG port Debugging – 3-pin 2.54mm pitch header for serial console Serial […]

February 19, 2019February 19, 2019 by Jean-Luc Aufranc (CNXSoft) - 38 Comments

Design your own NAS with $25 4x SATA HAT for NanoPi M4 Board

NanoPi M4 is one of the many Rockchip RK3399 boards available on the market today. The SBC follows Raspberry Pi form factor, comes with 2 to 4 GB RAM, four USB 3.0 ports, Gigabit Etherent, HDMI 2.0, etc.. and exposes the 2-lane PCIe interface from the Rockchip processor not through a typical PCIe slot or mini PCIe slot, but instead through a 2.54mm pitch header. I feel like an odd choice at first glance, but it now makes complete sense, as the company has launched a 4x SATA HAT for NanoPi M4 board that leverages the header with PCIe 2x signals. 4x SATA HAT for NanoPi M4 key features and specifications: PCIe to SATA Chipset – Marvell 88SE9215 four-port 6Gbps SATA I/O controller USB – 2x 4-pin USB 2.0 host connectors Expansion – NanoPi M4 40-pin header exposed Misc Power key, unpopulated power key jumper Power LED, 4x SATA LEDs […]

February 14, 2019February 14, 2019 by Jean-Luc Aufranc (CNXSoft) - 21 Comments

$89 Sheeva64 Plug Computer is Powered by Marvell ARMADA 3720 Armv8 Processor

Sheevaplug is a Linux plug computer powered by Marvell Kirkwood 6281 ARM9 processor that was launched in 2009 with Ubuntu 9.04. As the name implies, Sheevaplug looks like a power adapter that’s plug directly into your mains socket, but it’s actually a headless computer, i.e. without video output, and instead coming with a USB port, Gigabit Ethernet, and an SD card slot. The device got fairly popular at the time, so it ended up in several hardware projects, and was supported by a long list of open source software projects as you’ll find out in the Wikipedia page. Ten years have passed, and Globalscale Technologies has just introduced an upgraded version with the Sheeva64 plug computer based on the same Marvell ARMADA 3720 dual core Armv8 processor as found in ESPRESSOBin board. Sheeva64 plug computer specifications: SoC – Marvell ARMADA 3720 dual core 64bit Arm processor up to 1.2GHz System […]

February 13, 2019 by Jean-Luc Aufranc (CNXSoft) - 164 Comments

ODROID-N2 Amlogic S922X SBC Coming in April for $63 and Up

Due to RAM supply issues, Hardkernel canceled RK3399 based ODROID-N1 board last year, and decided to replace it with ODROID-N2 using a “newer SoC .. with faster CPU/GPU cores and native DDR4 support”, but they did not provide any details about the processor, and we speculated it could be the upcoming Amlogic S922X processor. Hardkernel has now formally unveiled ODROID-N2, the first Amlogic S922X SBC to be announced, with 2 to 4GB DDR4 RAM, 4x USB 3.0 ports, Gigabit Ethernet, HDMI 2.0a video output up to 4K 60p and more. ODROID-N2 SBC specifications: SoC – Amlogic S922X hexa-core big.LITTLE processor with 4x Arm Cortex A73 cores @ up to 1.8 GHz, 2x Arm Cortex A53 cores @ 1.9 GHz, Arm Mali-G52 GPU @ 846MHz; 12nm manufacturing process System Memory – 2GB or 4GB DDR4 RAM @ 1320 MHz Storage – 8MB SPI flash, eMMC flash module socket, micro SD card […]