Linux News - Page 295 of 434 - CNX Software

January 14, 2016 by Jean-Luc Aufranc (CNXSoft) - No Comments

CYCLONE F100 Tegra K1 Fanless Embedded Computer Supports up to 8GB RAM, SATA, and Various Networking Options

Calao Systems has added a new member to the their rugged embedded computers family with Cyclone F100 powered by Nvidia Tegra K1 quad core Cortex A15 processor with up to 8GB RAM, optional industrial grade SATA Nandrive, and mSATA, dual Gigabit Ethernet, and mPCIe connectivity options for IoT and M2M with LoRA, WiFi, RF radios, etc… Target applications include surveillance, identification, transport, robotic, graphic enhanced digital signage, and medical equipment. Cyclone F100 specifications: SoC – Nvidia Tegra K1 quad-core ARM Cortex A15 processor @ 2.3 GHz with 192-core Kepler GPU supporting OpenGL 4.4, OpenGL ES 3.1 and CUDA/GPGPU System Memory – 2 GB DDR3L (Options for 4 and 8GB on request) Storage – 8 GB eMMC, 8 MB SPI flash and micro SD card slot. Optional: Industrial grade SATA Nandrive, mSATA socket Video Output – HDMI, options: LVDS and DisplayPort Audio I/O – HDMI, optical S/PDIF out, Mic In / […]

January 13, 2016January 13, 2016 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

BeagleBone Blue Board is Designed for Robots and UAVs

Beagleboard.org organization already tried to go Blue with BeagleBone BlueSteel-Basic that was supposed to a the single board computer to be used by OEM to integrate into their design instead of BeagleBone Black development board. For some unknown reasons this never happened, but they’ve now reused the color to introduce BeagleBone Blue board designed for robotics and UAVs. BeagleBone Blue specifications: SoC – Texas Instruments Sitara AM3358 Cortex A8 @ 1 GHz + PowerVR SGX530 GPU System Memory – 512 MB DDR3 Storage – 4 GB 8-bit on-board flash storage Connectivity – 802.11 b/g/n, Bluetooth 4.0 LE USB – USB 2.0 client and host Motor Control – 8x 6V servo out, 4x DC motor out, 4x quad enc in Sensors – 9 axis IMU, barometer “Easy connect Interfaces” – GPS, DSM2 radio, UARTs, SPI, I2C, analog, buttons, LEDs Power / Battery – 2-cell LiPo support with balancing, 6-16V charger input […]

January 13, 2016June 18, 2018 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

FOSDEM 2016 Schedule – Open Source Hardware and Software Event in Europe

FOSDEM (Free and Open Source Software Developers’ European Meeting) is a 2-day event that usually takes place on the first week-end of February in Brussels, but this year it will be on January 30-31. The event brings thousands of developers, hackers, and other person interested in open source technology who present their projects and share ideas. FOSDEM 2016 schedule is now available, and There will be 557 speakers, 612 events, and 50 tracks this year including 7 main tracks: Distros, Enterprise, Hardware, Communications, Miscellaneous, Office, Systems Administration, and Virtualization. So I’ve had a look at some of the talks, especially out of “Embedded, Mobile and Automotive” and “IoT” devrooms, and prepared my own virtual schedule although I won’t be able to attend. Saturday 10:30 – 10:55 – MIPS, the other side of the embedded by Alexjan Carraturo For many years MIPS processors have been involved in the embedded market, particularly […]

January 12, 2016September 21, 2016 by Jean-Luc Aufranc (CNXSoft) - 20 Comments

Amlogic S905X Processor Specifications

[Update September 2016: Removed Video Input Unit and Gigabit Ethernet MAC, since the latest documents have removed them] A few weeks ago, I wrote about the upcoming Amlogic S905M quad core Cortex A53 processor support 4K VP9 and 10-bit HEVC, but the silicon manufacturer seems to struggle with sticking with a name, as after the initial S908 part, they moved to S905M, before hopefully settling on Amlogic S905X, for which I received more information include a block diagram, and more detailed specifications. These are most of the specifications currently available for Amlogic S905X processor with highlights in bold: CPU Sub-system – Quad core ARM Cortex-A53 CPU up to 1.5GHz (DVFS) with Neon and Crypto extensions 3D Graphics Processing Unit – Penta-core ARM Mali-450 GPU up to 750MHz+ (DVFS) with two geometry/vertex processors, three pixel processors supporting OpenGL ES 1.1/2.0 and OpenVG 1.1. 2.5D Graphics Processor – Fast bitblt engine with […]

January 10, 2016 by Jean-Luc Aufranc (CNXSoft) - No Comments

MYiR Tech Introduces Atmel SAMA5D4 CPU Module and Development Board

MYiR Tech has launched a new development board – MYD-JA5D4X – featuring their Atmel SAMA5D4 Cortex A5 system-on-module called MYC-JAD5D4X with 512MB DDR2, 512MB Flash, and various ports such as Fast Ethernet, RS485, LCD panel interface, USB connectors and so on. Target applications include control panel/HMI, fitness equipment, smart grid infrastructure, communications gateways, and imaging terminals among others. Let’s start wit the MYC-JAD5D4X CPU module specifications: SoC – Atmel SAMA5D42 or SAMA5D44 ARM Cortex-A5 processor @ up to 600MHz (945DMIPS) with NEON and FPU, 720p hardware video decoder (SAMA5D44 only) System Memory– 512MB (2x 256MB) DDR2 SDRAM Storage – 512MB NAND Flash, 4MB Data Flash, 64KB EEPROM Connectivity – On-board Ethernet PHY I/Os via 200-pin SO-DIMM edge connector 2 x Ethernet 3 x USB2.0 Host 8 x Serial ports 4 x TWI, 3 x SPI 5 x 12-bit ADC 1 x SMD 4 x 4-bit SDIO 1 x LCD 1 x ISI 7 […]

January 6, 2016January 6, 2016 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Outernet Shares Knowledge via their Lighthouse Satellite Receiver

While many of us take Internet access for granted, about 60% of the world population did not have access to Internet at the end of 2014, and Outernet initiative aims to provide educational, emergency, and news content to this segment of the population, which still represents the majority, at a rate of 1GB per day via a satellite receiver called Lighthouse. Let’s check the hardware first: SoC – Amlogic AML8726-MX dual core Cortex A9 @ 1.5GHz with Mali-400MP GPU System Memory – 1GB DDR3 Storage – 4 GB NAND flash + 1x micro SD slot Video Output – HDMI, AV (CVBS + R/L audio) Audio Output – HDMI, AV, and optical S/PDIF Connectivity – 10/100M Ethernet, 802.11 b/g/n Wi-Fi with up to 5 clients Tuner – DVB-S2 tuner with two antenna connectors (only one used) USB – 3x external USB 2.0 ports, 2x internal USB 2.0 ports (used) Misc – […]

January 4, 2016January 7, 2016 by Jean-Luc Aufranc (CNXSoft) - 53 Comments

Faster H.265/HEVC Video Encoding with Nvidia GTX960 GPU and ffmpeg

H.265 promises the same video quality as H.264 when using half the bitrate, so you may have thought about converting your H.264 videos to H.265/HEVC in order to reduce the space used by your videos. However, if you’ve ever tried to transcoding videos with tools such as HandBrake, you’ll know the process can be painfully slow, and a single movie may take several hours even with a machine with a power processor. However, there’s a better and fster solution thanks to hardware accelerated encoding available in some Intel and Nvidia graphics cards. For this purpose, GearBest sent me Maxsun MS-GTX960 graphics card, a second generation Maxwell GPU, that supports H.265 accelerated video encoding and promised up to 500 fps video encoding. So I’ve put the graphics card to the test in a computer running Ubuntu 14.04, and reports some of my findings here. Similar instructions can also be followed in […]

January 3, 2016May 16, 2016 by Jean-Luc Aufranc (CNXSoft) - 37 Comments

Raspberry Pi Zero, C.H.I.P, and Orange Pi One Boards’ Features and Price Comparisons

With Raspberry Pi Zero, Next Thing C.H.I.P, and Orange Pi One, we now have have three ARM Linux development boards selling (now or soon) for less than $10 excluding shipping and taxes. So I’d think it would be interesting to compare the features of the boards, and prices for different use cases. The comparison table below shows the three boards features side-by-side with items highlighted in green for the best or extra features, and in red for the weakest. Some cells will have to be filled later as data is currently not available (marked TBD). Raspberry Pi Zero C.H.I.P Orange Pi One Processor Broadcom BCM2835 single core ARM11 processor @ 1GHz (~1250 DMIPS) Allwinner R8 Cortex A8 processor @ 1 GHz (2000 DMIPS) Allwinner H3 quad core Cortex A7 processor @ 1.2 GHz (4x 2280 DMIPS) GPU VideoCore IV ARM Mali-400 ARM Mali-400MP2 Video Decoding 1080p30 for H.264, MPEG2* and […]