Linux News - Page 360 of 478 - CNX Software

June 13, 2015June 16, 2015 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Inforce 6410Plus Qualcomm Single Board Computer Adds GPS, MIPI CSI and DSI Interfaces

[Update on June 16 with comments from Inforce Computing: The Inforce 6410Plus is a product/application ready SBC that can be mass-manufactured to be designed-in directly by OEMs into end-products. Of course developers, DIY enthusiasts, and research houses may use it as a development board, but essentially it’s a product ready SBC. CSI and DSI interfaces – A single 40-pin LSHM MIPI connector on the previous generation product has been replaced with a single 51-pin FI-R MIPI CSI connector. A single connector enables support for 2 cameras/up to 20MP. Similarly, we’ve replaced the LVDS interface with a single 51-pin MIPI-DSI connector that supports two simultaneous displays. ] Inforce IFC6410 board is one of the few low cost Qualcomm Snapdragon development boards / SBCs available on the market. Released in 2013, it features a Snapdragon 600 processor (APQ8064) coupled with 2GB RAM, 4GB eMMC, and various connectors. Inforce Computing has now introduced […]

June 10, 2015November 18, 2015 by Jean-Luc Aufranc (CNXSoft) - 19 Comments

FirePrime Board Features Rockchip RK3128 Quad Core Cortex A7 Processor

The team behind Firefly-RK3288 development board has designed a new board with the less powerful but cheaper and more power efficient Rockchip RK3128 quad core Cortex A7 processor. FirePrime comes with 1GB RAM, 8GB Flash, Gigabit Ethernet, Wi-Fi and Bluetooth, and various other ports and expansion headers. As with many other new development boards, Firefly team has gone with a baseboard + system-on-module design (mini PCI-e connector), and will certainly sell the module separately to companies who want to design their own baseboard. Fireprime board specifications: SoC – Rockchip RK3128 quad core ARM Cortex A7 @ 1.3 GHz with ARM Mali-400MP2 GPU System Memory – 1 GB LPDDR2 @ 533 MHz Storage – 8 GB NAND flash + micro SD slot Connectivity – Gigabit Ethernet, 802.11 b/g/n Wi-Fi, and Bluetooth 4.0 (AP6212 module) Video Output – HDMI 1.4 output, CVBS (AV) as well as MIPI and LVDS via expansion headers […]

May 31, 2015May 31, 2015 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

Linaro 15.05 Release with Linux 4.1 and Android 5.1

Linaro 15.04 has been released with Linux 4.1-rc4, Linux 3.10.79 and 3.14.42 (LSK), and Android 5.1_r3. The Ubuntu image is now based on Vivid instead of Utopic. Android and Debian builds/images have been released for Hikey’s 96boards, Ubuntu Vivid and Android builds have been setup for Qualcomm’s Dragonboard 410c. A new platform, Socionext M8M, has also show in Linaro changelog. I could not find details about M8M, but Socionext is a “new company that designs, develops and delivers System-on-Chip products” and focuses on “imaging, networking and other dynamic technologies”. Their latest press release mentions a 4K media processor with build-in HDMI 2.0 Tx and Rx, so maybe M8M is based on that processor, but I can’t know for sure as they have several chips. Highlights of this release: Linux Linaro 4.1-rc4-2015.05 GATOR updated to version 5.21.1 updated integration-linaro-vexpress64 topic by ARM LT: PCI support added – for Juno r1. Linaro […]

May 28, 2015 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Baikal T1 is a Dual Core MIPS P5600 Communication Processor

When allegations surfaced that the NSA messed with devices manufactured by US companies, and possibly other, government of geopolitical significance started to take measures. For instance, China may have removed Apple and Cisco products from its list of approved products due to security reasons, and Russia decided to design its own Baikal processors to replace Intel and AMD solutions. At the time of the announcement, Baikal M and M/S chip were supposed to be the first ones and based on ARM Cortex A57 cores, but Imagination Technologies recently announced that Russia based Baikal Electronics was working on Baikal T1 communication processor with two MIPS P5600 cores. Some of the specifications include: CPU – Dual core MIPS 5600 processor @ 1.2 GHz with 1MB L2 cache Memory – DDR3 controller Storage – SATA 6Gbps controller and PHY Connectivity – 2x Gigabit Ethernet controller, 1x 10Gigabit Ethernet controller and PHY USB 2.0 […]

May 27, 2015 by Jean-Luc Aufranc (CNXSoft) - 24 Comments

Allwinner H3 Based Orange Pi 2 Board Price Drops to as Low As $25

As Raspberry Pi Model B+ price got reduced to $25, some competitors also decided to bring their price down. Shenzhen Xunlong Software, the maker of Orange Pi board, decided to decrease their Orange Pi 2 and Orange Pi 2 Mini boards by $5 to respectively $30 and $25 plus around $2 shipping. Both boards are based on the same PCB, but the mini version lacks WiFi. Let’s refresh our memory with the specs: SoC – Allwinner H3 quad core Cortex A7 @ 1.6 GHz with 256KB L1 cache, 1MB L2 cache, and an ARM Mali-400MP2 GPU up to 600 MHz System Memory – 1GB DDR3 Storage – micro SD card slot (up to 64GB) Video Output – HDMI (CEC and HDCP support), AV port Audio I/O – HDMI, AV port, on-board microphone Connectivity – 10/100M Ethernet, 802.11 b/g/n Wi-Fi (Realtek module, not found on mini version) USB – 4x USB […]

May 26, 2015May 26, 2015 by Jean-Luc Aufranc (CNXSoft) - 12 Comments

Intel Introduces Braswell NUCs with Celeron N3050 and Pentium N3700 Processors

Intel has already announced several Braswell processors as successors for Bay Trail-M processor with 4 to 6W TDP and 14nm manufacturing process. Two of these, namely Intel Celeron N3050 (dual core) and Pentium 3700 (quad core), have fund their way into the latest Intel NUCs that are currently listed for $140 and $180 in the US with the official release date fixed on June 8. The dual core version is called NUC5CPYH, while the quad core is NUC5PPYH. Both share the following specs: Processor Intel Celeron N3050 dual core processor @ up to 2.16 GHz with 2MB cache, Intel HD Graphics @ 600 MHz max, 6W TDP Intel Pentium N3700 quad core processor @ up to 2.4 GHz with 2MB cache, Intel HD Graphics @ 700 MHZ max, 6W TDP Memory – 1x DDR3L SODIMM 1.35V, 1333/1600 MHz up to 8GB maximum Storage – 1x SATA @ 6.0 Gbps for […]

May 20, 2015 by Jean-Luc Aufranc (CNXSoft) - 72 Comments

Lemon Pi Board is a $35 Raspberry Pi 2 Alternative Powered by Actions Semi S500 SoC (Crowdfunding)

I wrote about ActDuino S500 last month. It’s a development board powered by Actions Semi S500 quad core Cortex A9 processor, but very few details were available, and release date and pricing had not been disclosed. EmbedStudio, a Shenzhen startup, has now launched an Indiegogo campaign (flexible funding) for their Lemon Pi board based on S500 processor. Lemon Pi specifications: SoC – Actions Semi S500 quad core Cortex A9r4 processor with 512KB L2 Cache and a PowerVR SGX544 GPU with OpenGL ES 1.1/2.0, OpenVG 1.0.1, and OpenCL support Memory – 1GB DDR3 RAM (Option: 2GB, not part of crowdfunding rewards) Storage – micro SD slot. Option: Up to 64GB eMMC 4.5 flash, not part of crowdfunding rewards. Video Output – HDMI 1.4 with HDCP, 3.5mm jack for CVBS (AV), MIPI DSI Audio – HDMI, AV (Line out / microphone) Connectivity – 10/100M Ethernet (RJ45; RTL8201F) USB – 2x USB 2.0 […]

May 19, 2015May 19, 2015 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

Olimex Announces RT5350F-OLinuXino and Evaluation Boards Availability

Olimex had been working on a small board with Ralink RT5350F processor for over a year, with delays mostly due to software development and undocumented registers. But RT5350F-OlinuXino is now available together with an evaluation board with tow relays, two Ethernet ports, and expansions headers, as well as a DIN EBV still in development. RT5350F-OlinuXino specifications: SoC – Ralink / Mediatek RT5350F MIPS24KEc CPU @ 360 MHz System Memory – 32MB SDRAM Storage – 8MB SPI NAND Flash 3x headers with access to USB 2.0 HOST/Device 5x 10/100 Mbps Ethernet port GPIOs, SPI, I2C I2S, PCM UART JTAG Power – 3x external DCDC power converters releasing internal RT5350F vreg and preventing common problem with overheating with this chip. Dimensions – N/A Operating Temperature Range – -10 to +55C The board is pre-loaded OpenWRT with Linux 3.18.11. You can find builds instructions and other documentation in the Wiki, as well as […]