Reviews - Page 6 of 119 - CNX Software

December 30, 2023January 9, 2024 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Mixtile Core 3588E SoM review – Part 2: Ubuntu 22.04, hardware features, RK3588 AI samples, NVIDIA Jetson compatibility

We’ve already had a look at the Mixtile Core 3588E NVIDIA Jetson Nano/TX2 NX/Xavier NX/Orin Nano compatible Rockchip RK3588 SO-DIMM system-on-module in the first part of the review with an unboxing and first boot with an Ubuntu 22.04 OEM installation. I’ve now had more time to play with the devkit comprised of a Core 3588 module in 16GB/128GB configuration and a Leetop A206 carrier board with low-level features testing, some benchmarks, multimedia testing with 3D graphics acceleration and video playback, some AI tests using the built-in 6 TOPS NPU and the RKNPU2 toolkit, and finally I also tried out the system-on-module with the carrier board from an NVIDIA Jetson Nano developer kit. Ubuntu 22.04 System info We had already checked some of the system information in the first part of the Mixtile Core 3588E review, but here’s a reminder:

jaufranc@Mixtile-RK3588E:~$ uname -a
Linux Mixtile-RK3588E 5.10.160-rockchip #18 SMP Wed Dec 6 15:11:42 UTC 2023 aarch64 aarch64 aarch64 GNU/Linux
jaufranc@Mixtile-RK3588E:~$ cat /etc/lsb-release 
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=22.04
DISTRIB_CODENAME=jammy
DISTRIB_DESCRIPTION="Ubuntu 22.04.3 LTS"
jaufranc@Mixtile-RK3588E:~$ df -h
Filesystem      Size  Used Avail Use% Mounted on
tmpfs           1.6G  2.7M  1.6G   1% /run
/dev/mmcblk0p2  113G  7.5G  101G   7% /
tmpfs           7.7G     0  7.7G   0% /dev/shm
tmpfs           5.0M  8.0K  5.0M   1% /run/lock
tmpfs           4.0M     0  4.0M   0% /sys/fs/cgroup
/dev/mmcblk0p1  512M  101M  411M  20% /boot/firmware
tmpfs           1.6G   60K  1.6G   1% /run/user/0
tmpfs           1.6G   76K  1.6G   1% /run/user/130
tmpfs           1.6G   68K  1.6G   1% /run/user/1000
jaufranc@Mixtile-RK3588E:~$ free -mh
               total        used        free      shared  buff/cache   available
Mem:            15Gi       601Mi        13Gi        47Mi       1.4Gi        14Gi
Swap:          2.0Gi          0B       2.0Gi

jaufranc@Mixtile-RK3588E:~$ uname -a

Linux Mixtile-RK3588E 5.10.160-rockchip #18 SMP Wed Dec 6 15:11:42 UTC 2023 aarch64 aarch64 aarch64 GNU/Linux

jaufranc@Mixtile-RK3588E:~$ cat /etc/lsb-release

DISTRIB_ID=Ubuntu

DISTRIB_RELEASE=22.04

DISTRIB_CODENAME=jammy

DISTRIB_DESCRIPTION="Ubuntu 22.04.3 LTS"

jaufranc@Mixtile-RK3588E:~$ df -h

Filesystem Size Used Avail Use% Mounted on

tmpfs 1.6G 2.7M 1.6G 1% /run

/dev/mmcblk0p2 113G 7.5G 101G 7% /

tmpfs 7.7G 0 7.7G 0% /dev/shm

tmpfs 5.0M 8.0K 5.0M 1% /run/lock

tmpfs 4.0M 0 4.0M 0% /sys/fs/cgroup

/dev/mmcblk0p1 512M 101M 411M 20% /boot/firmware

tmpfs 1.6G 60K 1.6G 1% /run/user/0

tmpfs 1.6G 76K 1.6G 1% /run/user/130

tmpfs 1.6G 68K 1.6G 1% /run/user/1000

jaufranc@Mixtile-RK3588E:~$ free -mh

total used free shared buff/cache available

Mem: 15Gi 601Mi 13Gi 47Mi 1.4Gi 14Gi

Swap: 2.0Gi 0B 2.0Gi

I also ran inxi to check a few more details. […]

December 28, 2023March 8, 2024 by Jean-Luc Aufranc (CNXSoft) - 10 Comments

Review of Blackview MP80 (Processor N97) mini PC with Windows 11 Pro

Blackview MP80 is a tiny pocket-sized mini PC powered by either an Intel Alder Lake-N Processor N95 or Processor N97 CPU with 16GB LPDDR5 RAM and a 512GB M.2 SSD preloaded with Windows 11 Pro. We’ve already reviewed the Blackview MP80 (N95) mini PC a few months ago, but the company has now sent us the Processor N97 model for review. Both models look identical with the same ports including three HDMI 2.0 video outputs, three USB ports, and two gigabit Ethernet ports, plus a Wi-Fi 5 and Bluetooth 4.2 wireless module. The mini PCs are also actively cooled, and the only obvious differences are the processor (Intel N95 vs N97) and the color of the enclosure. We usually do a three-part review with the first one listing the specs, and going through an unboxing and a teardown, but for the Blackview MP80 (N97) review we will do those and […]

December 27, 2023December 27, 2023 by Jean-Luc Aufranc (CNXSoft) - No Comments

TTS-20 Pro laser engraver review

TwoTrees TTS-20 Pro 20W is a compact, lightweight laser engraver that can be used with wood, plastic, leather, and metal. It can either be used for businesses that want to start producing items or schools that want students to learn how to create pieces, whether it’s cutting work or various engraving, the TTS-20 Pro 20W laser engraving machine is easy to use and safe. TTS-20 Pro laser engraver specifications The TTS-20 Pro laser engraver features a large lightweight aluminum frame with a working area of 418 x 418 mm (external dimensions: 695 x 620 x 125 mm). It comes with a 20 Watts laser module with a 0.08 mm accuracy and supports up to 30,000 mm/min engraving speed. The controller supports either a USB connection to a host computer or engraving from a file on a microSD card. The laser engraver also ships with air assist which will deliver cleaner […]

December 26, 2023January 27, 2024 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

GL.iNet GL-MT6000 “Flint 2” WiFi 6 router review – Part 1: Unboxing, teardown, and first try

GL.iNet Flint 2 (also known as GL-MT6000) is a new WiFi 6 AX6000 router based on MediaTek MT7986 (Filogic 830) Arm SoC running of fork OpenWrt 23.05 and claims up of up tup to 900 Mbps VPN speed using WireGuard. The company sent us a review sample of the Flint 2 router, and since we’ve already listed the specifications, we’ll focus the first part of the review on an unboxing, teardown, and a first quick try, before testing some of the features, including the VPN speed, and comparing it to the Xiaomi Mi AX6000 router I own in the second part of the review in a few weeks. GL.iNet GL-MT6000 unboxing The package shows the model number Flint 2 / GL-MT6000 and key features such as the AX6000 WiFi 6, dual 2.5GbE, multi-WAN support, dual Ethernet WAN, OpenWrt, and VPN. The package features the router itself with its four antennas, […]

December 22, 2023January 17, 2024 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Orbbec Femto Mega 3D depth camera review – Part 1: Unboxing, teardown, and first try

Orbbec sent us a Femto Mega 4K RGB and 3D depth and camera for review. The camera is powered by an NVIDIA Jetson Nano module, features Microsoft ToF technology, and outputs RGB, TOF, and IR data through a USB-C port or a gigabit Ethernet port. I’ll start the two-part with an unboxing, a teardown, and a quick try with the OrbbecViewer program on Ubuntu 22.04 in the first part of the review because checking out the software and SDK in more detail in the second part later on. Femto Mega depth and RGB camera unboxing I received the camera in a cardboard package showing the camera model and key features: “ORBBEC Femto Mega DEPTH+RGB CAMERA”. The package’s content is comprised of a USB-C cable to connect to the host, the camera, and a 12V/2A power adapter. The front side of the camera features the RGB camera sensor, the TOF (Time-of-Flight) […]

December 19, 2023December 20, 2023 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

iKOOLCORE R2 (Core i3-N300) system review – Part2: Proxmox VE, Ubuntu 22.04, pfSense

iKOOLCORE R2 Ubuntu Promox VE dual display

In the first part of iKOOLCORE R2 mini PC & router review, I had a look at the hardware with an unboxing and a teardown of the Intel Core i3-N300 Alder Lake-N computer and also noticed the device booted to a UEFI shell. So for the second part of the review, I will report my experience installing Proxmox VE on the iKOOLCORE R2 and setting up and using Ubuntu 22.04, pfSense 2.7.2, and OpenWrt 23.05 virtual machines, making sure I can still use a physical display, keyboard, and mouse with Ubuntu while pfSense firewall is running. As a side note, the previous generation iKOOLCORE R1 mini PC that was sent to Ian for review with Proxmox VE and various virtual machines preinstalled OpenWrt, Debian 11, and Windows 10 Enterprise LTSC set to Chinese language by default. As I understand it, iKOOLCORE still does that for the Chinese market, but not […]

December 19, 2023December 19, 2023 by Supachai Vorapojpisut - 9 Comments

Seeed Studio mmWave sensor kit – Part 1: unboxing and first impression with ESPHome and Home Assistant

mmWave Human Detection Sensor Kit Review Home Assistant

Excited to share my first review, written for CNX Software! This time, we’re diving into the Seeed Studio mmWave Human Detection Sensor Kit, which harnesses the power of mmWave radar. The technology I’m particularly interested in for its smart home potential. Therefore, I jumped at the chance when CNX Software offered a product review opportunity. The kit arrived promptly at my doorstep just one week after accepting CNX Software’s offer. Here are my initial findings of the product and its capabilities to replace existing motion detection products. Unboxing the mmWave sensor kit I opened the DHL box and found the neatly bubble-wrapped mmWave Human Detection Sensor Kit. Alongside the kit, I discovered a bonus: the MR60FDA1 60GHz mmWave Sensor – Fall Detection Module Pro. This higher-frequency module boasts better resolution and even adds a fall detection feature compared to the kit’s included module, the MR24HPC1. However, the MR24HPC1 24GHz mmWave Sensor […]

December 18, 2023February 4, 2024 by Jean-Luc Aufranc (CNXSoft) - 8 Comments

Review of GEEKOM Mini Air12 mini PC with Windows 11 Pro (Part 2)

We’ve already done an unboxing and teardown of the GEEKOM Mini Air12 mini PC in the first part of the review and we’ve now had time to test Windows 11 Pro on the Intel Processor N100 mini PC equipped with 16GB SO-DIMM DDR5 and a 512GB M.2 SSD. Despite the low-end processor, the mini PC boots quite fast and it’s perfectly usable to browse the web, play YouTube videos, and perform other tasks like office work and photo editing. In part 2 of the review, we’ll test Windows 11 Pro thoroughly with a software overview, features testing, benchmarks, storage and network performance tests, thermal performance, fan noise, and power consumption of GEEKOM Mini Air12. Software overview and features testing Going to System->About in the Windows settings confirms we have a Mini Air12 mini PC powered by an 800 MHz (based frequency) Intel Processor N100 CPU, with 16GB of RAM, and […]