Reviews - Page 79 of 119 - CNX Software

August 27, 2016August 27, 2016 by Jean-Luc Aufranc (CNXSoft) - 8 Comments

Getting Started with ReSpeaker WiFi IoT Board’s Audio Capabilities, Voice Recognition and Synthesis

ReSpeaker is a development board combining an Atmel AVR MCU, a MediaTek MT7688 WiFi module running OpenWrt, a built-in microphone, an audio jack, and I/O headers to allow for voice control and output for IoT applications. That means you could make your own Amazon Echo like device with the board and add-ons, use it as a voice controlled home automation gateway and more. The board was launched on Kickstarter a few days ago, and already raised $100,000 from about 100 backers, but I’ve received an early sample, so I’ll provide some more information about the firmware, and shows how to use with some Python scripts leveraging Microsoft Bing Speech API. You’ll need a micro USB to USB cable to connect your to computer (Linux, Windows, Mac OS…), and a speaker to connect to the board. Linux (OpenWrt) boots in a few seconds, and once it’s done all RGB LED will […]

August 25, 2016August 25, 2016 by Ray - 8 Comments

KowanTV Click Linux IPTV Box Review

CNXSoft: Ray reviews Amlogic S812 powered Linux based KowanTV Click TV box with allegedly access to over a thousand free IPTV channels. While the hardware is pretty standard, you pay a (hefty) premium to access their IPTV servers, and it reminds me of Jynxbox Live which I reviewed a few years ago. I received one these rare Linux stream boxes. It’s called TVone Entertainment hub, advertised as: KowanTV Click To Play Entertainment Hub European American TV Channels Live Broadcast Video on demand IPTV BOX 1000+ Free Channels, and provided by GeekBuying for this review. KowanTV Click Specifications System Operating System Embedded Media OS( linux ) CPU Amlogic S812( ARM cortex-A9 ) GPU Mali-450 Octo-core RAM 2GB RAM ROM 8GB Flash Memory Communication Wifi Connectivity IEEE 802.11 b/g/n 2.4GHz/5GHz Ethernet 10/100M Bluetooth Yes Media Video Supported Video (up to 4K) – MPEG1/2/4, H.264, H.265,AVC, VC-1 , RM/RMVB , Xvid , DviX3/4/5/6, […]

August 24, 2016November 2, 2016 by Jean-Luc Aufranc (CNXSoft) - 45 Comments

M12N Amlogic S912 Octa-core TV Box Review – Part 2: Android 6.0 Firmware

Shenzhen Shiningworth MXQ Plus M12N is one of the first TV box powered by Amlogic S912 octa-core processor also bringing a faster GPU, VP9 and HDR support compared to the earlier Amlogic S905 processor. I’ve already shown the device, its accesories, and its internal degisn in the first part of MXQ Plus M12N review, so today I’ll spend time reporting my finding testing features and performance with Android 6.0 firmware. Setup Wizard and First Impressions Since there are only two USB ports, I connected my USB hard drive to one, and used a USB hub to connect input devices including two RF dongles for an air mouse, and a gamepad, as well as a USB keyboard to take screenshots. I also added Ethernet and HDMI cable, and finally connected the power supply to boot it up. But as you can see from the picture the very first boot was not […]

August 24, 2016 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Coowell V4 Android mini PC with Camera Review – Part 1: Unboxing and Teardown

Coowell V4 is one of the rare Android mini PCs with a built-in camera. It is powered by Rockchip RK3368 octa-core processor combined with 2GB RAM and 16GB flash. GearBest asked me whether I wanted to review it, and since I was curious about the camera, I took the offer up. Today, in the first part of the review I’ll start by checking out the device and its accessories, and tear it down to find more about the hardware design, before specifically testing the camera in the second part of the review in a similar way to what I did for HD23 review. Coowell V4 Unboxing The device comes in a black retail package with SMART MEDIA HUB text. The only icon that may cause troubles at custom might be the Android logo and text lacking TM. There’s also sticker on the side indicate Model: V4. SO there may be […]

August 22, 2016August 23, 2016 by Ray - 55 Comments

Mini Review of MECOOL BM8 TV Box with Android 6.0 and Kodi 17.0

CNXSoft: An other review by Ray for an Amlogic S905X powered TV box provided by Videostrong. MECOOL BM8 specifications The specifications are pretty standard, except for the large flash: SoC – Amlogic S905X quad core Cortex A53 @ 2.0GHz with a penta-core Mali-450MP GPU Memory – 2GB DDR3 RAM Storage – 32GB eMMC flash + card reader for SD/SDHC/MMC cards Video Output – HDMI 2.0 up to 4K*2K “super HD video” with HDR support and AV outputs Audio Output – HDMI, AV, and optical S/PDIF Connectivity – 10/100M Ethernet, dual band WiFi 802.11 b/g/n, and Bluetooth 4.0 USB – 2x USB 2.0 port Supports HEVC (H.265) decoding The TV box runs Android 6.0. Unboxing The box comes with 3 different Power Adapters, a HDMI cable, power supply and a completely oversized (20cm/5cm) remote control with “learning modes ability”. No manual was inside the box. The Videostrong MECOOL BM8 is a […]

August 21, 2016August 22, 2016 by Jean-Luc Aufranc (CNXSoft) - 12 Comments

Using M12N Android Amlogic S912 TV Box as a Game Console (Video)

When Amlogic announced S912 processor, they mentioned it would target not only 4K OTT and IP set-top boxes, but also gaming consoles thanks to a faster and better Mali-T820MP3 GPU compared to the Mali-450MP GPU found in their previous S905 and S805 processor, and we’ve already seen that S912 is indeed faster in 3D benchmarks. So I decided to play several games to show the performance, the pre-loaded retro gaming app, and for people who have never used a TV box to play games show what it looks like, and how to play using M12N TV box, in conjunction with MINIX NEO A2 Lite air mouse and Tronsmart Mars G01 wireless gamepad. I played four games downloaded from the Play Store or Amazon Underground: Candy Crush Saga with air mouse Beach Buggy Racing and Riptide GP2 with the gamepad Dead Trigger with the air mouse in menus, and the gamepad […]

August 15, 2016August 16, 2016 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

4K VP9, H.265 and H.264 Video Playback in Amlogic S912 M12N TV Box

I’ve received my first Amlogic S912 TV box with MXQ Plus M12N TV box this week-end, and I’ve decided to start testing by showing the media capabilities of the platform that is supposed to support 4K VP9 up to 60Hz, 4K 10-bit H.265 up to 60Hz and 4K H.264 up to 30 Hz. I connected the device to Onkyo TX-NR636 A/V recevier itself connected to LG 42UB820T 4K UHD TV, set video output to 2160p @ 60Hz, and played several 4K video samples from a USB hard drive using the pre-installed version of Kodi 16.1: 4K Hawaii Sunset _ GoPro Hero 4 Black 4k@30fps-I7CycuMpQ3w.webm (Downloaded from YouTube) – OK Beauty_3840x2160_120fps_420_8bit_HEVC_MP4.mp4 (H.265 @ 30 fps – No audio) – OK big_buck_bunny_4k_H264_30fps.mp4 (H.264 @ 30 fps – MPEG1/2 and AC3 audio) – OK big_buck_bunny_4k_H264_60fps.mp4 (H.264 @ 60 fps – MPEG1/2 and AC3 audio) – Video a bit choppy, large audio delay. Expected […]

August 14, 2016August 14, 2016 by Jean-Luc Aufranc (CNXSoft) - 12 Comments

GOLE1 mini PC Tablet Review – Part 2: Android 5.1 and Windows 10

GOLE1, also called GOLE1 F1, is an interesting device because it’s quite difficult, it’s like the offspring of a mini PC and a tablet with a smallish phone-like 5″ capacitive touch screen. It also dual boot Windows 10 and Android 5.1. I’ve already discussed about the hardware, and taken picture of the device, accessories, and motherboard, in the first part of the review, so today I’ll report my experiences with Windows 10 and Android 5.1, as well as the potential use cases. Since I’ve already reviewed Intel Atom x5-Z8300 mini PCs, as well as a dual boot Windows and Android Intel mini PC, I’ll focus on what makes GOLE1 different in this review. GOLE1 Dual Boot and Use Cases I normally check my emails on my smartphone while having breakfast in the morning, but one day the charging micro USB cable was not connected properly to my phone, so I […]