robotics News - Page 3 of 30 - CNX Software

March 4, 2024April 23, 2024 by Tomisin Olujinmi - 1 Comment

Renesas RZ/V2H Cortex-A55/R8/M33 MPU comes with 80 TOPS AI accelerator for robotics and autonomous applications

The RZ/V2H is the latest addition to the Reneasas family of 32-bit and 64-bit microprocessors. Renesas RZ/V2H microprocessor features four Arm Cortex-A55 application processing cores, dual Arm Cortex-R8 real-time processing cores, and one Cortex-M33 core for system management, as well as an AI accelerator with up to 80 TOPS (sparse) of performance. The RZ/V2H MPU includes the third generation of Renesas’ dynamically reconfigurable processor for AI (DRP-AI3) accelerator, a staple of the RZ/V series. The DRP-AI accelerator can run complex image AI models at a power efficiency of 10 TOPS per watt (TOPS/W), as much as 10 times higher than conventional microprocessors. Additionally, the RZ/V2H has another DRP that can be used in image processing and robotics applications. The board also comes with PCIe Gen3, USB 3.2, and Gigabit Ethernet for high-speed applications such as autonomous robotics and factory automation machine vision. It offers a performance boost over previous products […]

February 20, 2024February 19, 2024 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

Doly – A cute little autonomous AI-powered robot based on Raspberry Pi CM4 module (Crowdfunding)

Limitbit Doly is a cute little autonomous robot with two continuous tracks, two small arms controlled by servos, two round color displays acting as the eyes, and various sensors, all controlled by a Raspberry Pi CM4 system-on-module. The robot can be used for STEM (Science, Technology, Engineering, and Mathematics) education or as a developer platform. AI workloads can also run on the Raspberry Pi CM4 module taking sensors, camera, and microphone inputs, with the robot interacting with the user through the built-in stereo speaker and two eyes. In practice, that means Doly supports features such as face recognition and smart audio with the robot capable of recognizing its owner and responding to voice commands. Doly specifications: System-on-Module – Raspberry Pi CM4 Lite model CM4101000 (1GB RAM, Wireless) by default, but also supports other CM4/CM Lite modules with wireless Storage – MicroSD card slot Display – 2x high-resolution color displays (the […]

January 30, 2024January 31, 2024 by Tomisin Olujinmi - 6 Comments

EVN Alpha is a LEGO-compatible robotics controller built around Raspberry Pi RP2040 MCU (Crowdfunding)

The EVN Alpha is a robotics project from a team based in Singapore and is aimed at roboticists seeking an advanced building platform beyond what LEGO Robotics kits offer. This robotics controller can be considered a spiritual successor to the LEGO MINDSTORMS EV3 intelligent brick. It runs on the Raspberry Pi RP2040 microcontroller with two Cortex M0+ cores running at a maximum clock speed of 133 MHz and 264KB of embedded SRAM and builds upon the rich software support available for the microcontroller. It features 64 LEGO Technic-compatible holes on five sides for easy installation into your projects and has 26 ports for I2C, UART, servos, EV3, and NXT motors. It is smaller volumetrically than the LEGO bricks and can be powered from two generic 18650 Lithium-ion cells rather than a proprietary solution (unlike the LEGO SPIKE Prime). The EVN Alpha was created as a “basecamp for students looking to […]

January 29, 2024January 29, 2024 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

SunFounder GalaxyRVR review – An Arduino programmable Mars Rover-like robot for education

SunFounder sent us a GalaxyRVR 6-wheel robot for review. It looks like NASA’s Mars Rover robots but targets the education market with an Arduino UNO R3 compatible board and an ESP32-CAM board for WiFi connectivity and video capture. The GalaxyRVR robot kit can transmit video signals over WiFi to explore planet Earth with your mobile device or tablet and the camera can be adjusted up and down thanks to a servo motor. The robot gets its power from a solar panel coupled with a battery and features sensors such as obstacle avoidance and ultrasonic modules. NASA’s Mars Rover exploration robots NASA is currently using the Perseverance rover, also known as Percy, as the latest planetary exploration robot to land on Mars. It is designed to explore the Jezero Crater as part of NASA’s Mars 2020 mission. In addition to its scientific instruments, Perseverance also carries Ingenuity, a small experimental Martian […]

January 25, 2024January 24, 2024 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Arduino Alvik is a 3-wheel robot designed for STEAM education

Arduino Education’s Arduino Alvik is an upcoming 3-wheel educational robot that was just unveiled at the Bett 2024 show in London and designed to teach robotics, programming, and other STEAM subjects. The robot is based on an Arduino Nano ESP32 board and will come with a set of nineteen lessons designed by Arduino Education’s team in collaboration with teachers so that students can learn the basics of IoT, get started with MicroPython, and get themselves familiar with various physics and engineering concepts. The company has yet to provide the full specifications for the Alvik robot, but here’s what we know at this stage: Mainboard – Arduino Nano ESP32 2x wheels plus 1x ball wheel Sensors – “High-quality sensors” that include a ToF ranging sensor, line-following sensors, a 6-axis accelerometer & gyroscope, a proximity sensor, and color sensors. Expansion 2x Grove I2C connectors 2x Qwiic connectors 6-pin servo motor header for […]

January 24, 2024January 23, 2024 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

FOSDEM 2024 schedule – Open-source embedded, mobile, IoT, robotics, RISC-V, etc..

FOSDEM – which stands for Free and Open Source Software Developers’ European Meeting – is a free-to-participate event where thousands of developers meet in Brussels on the first week-end of February to discuss open-source software & hardware projects. FOSDEM 2024 will take place on February 3-4 with 880 speakers, 818 events, and 66 tracks. Although I won’t attend, I’ve created a virtual schedule like every year with sessions most relevant to the topics covered on CNX Software from the “Embedded, Mobile and Automotive” and “Open Hardware and CAD/CAM” devrooms, but also other devrooms including “FOSS Mobile Devices”, “ Energy: Reimagining this Ecosystem through Open Source”, “RISC-V”, and others. FOSDEM Day 1 – Saturday, February 3, 2024 10:30 – 10:55 – Screen Sharing on Raspberry Pi 5 Using VNC in Weston and Wayland with the Yocto Project and OpenEmbedded by Leon Anavi In 2023, embedded Linux developers received eagerly awaited news: […]

January 21, 2024January 20, 2024 by Tomisin Olujinmi - 5 Comments

Jetway launches the JF35-ADN1– A 3.5” Intel N97 SBC designed for industrial robotics applications

Jetway, an AAEON-affiliated manufacturer, has released a new single-board computer, the JF35-ADN1, targeted at industrial robotics applications. The JF35-ADN1 is a subcompact, 3.5” board that is powered by the Intel N97 (formerly Alder Lake) processor. It features several high-speed interfaces and peripherals for its target applications including two 2.5GbE ports, a total of eight USB 2.0 ports (physical ports and internal connectors), two USB 3.2 Gen 2 ports (Type-A and Type-C), and supports up to 32GB of DDR5 RAM via a SO-DIMM socket. It can power up to three displays via two HDMI 2.0b ports and a DisplayPort over USB-C port. The Jetway JF35-ADN1 SBC is aimed at Automated Guided Vehicles (AGV) applications, but it is stated to be versatile enough to accommodate other uses such as machine vision and payment systems solutions. The JF35-ADN1 features the same Intel N97 processor as AAEON’s Up Xtreme 7100 and is intended for […]

January 16, 2024January 16, 2024 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

AAEON UP Xtreme 7100 robotics SBC and mini PC is offered with Core i3-N305 or Processor N97 CPU

AAEON UP Xtreme 7100 SBC and Mini PC powered by an Intel Core i3-N305 or Processor N97 Alder Lake-N CPU and designed as an “all-in-one robotics solution” providing the sensor data processing, graphics, and other resources required for path planning and control algorithms used in AGVs (automated guided vehicles) and AMRs (autonomous mobile robots). The UP Xtreme 7100 single board computer and UP Xtreme 7100 Edge mini PC are both offered in compact form factors suitable for robots and feature terminal blocks for serial communication (RS-232/422/485 port and CAN bus) and a 30-pin Phoenix connector with 24V digital I/O and GPIOs. Other features useful for industrial use include 9V to 36V DC input, vibration/shock resistance, and lockable I/O ports. UP Xtreme 7100 specifications: Alder Lake N-series SoC (one or the other) Intel Processor N97 quad-core processor up to 3.6 GHz with 6MB cache, 24EU Intel UHD Graphics Gen 12 @ […]