sata News - Page 13 of 24 - CNX Software

August 21, 2017 by Jean-Luc Aufranc (CNXSoft) - 15 Comments

Hardkernel ODROID-HC1 Home Cloud One Stackable NAS is now available for $49

Hardkernel has just launched their ODROID-HC1 stackable NAS system based on a cost-down version of ODROID-XU4 board powered by Samsung Exynos 5422 octa-core Cortex-A15/A7 processor, which as previously expect, you can purchase for $49 on Hardkernel website, or distributors like Ameridroid. We now have the complete specifications for ODROID-HC1 (Home Cloud One) platform: SoC – Samsung Exynos 5422 octa-core processor with 4x ARM Cortex-A15 @ 2.0 GHz, 4x ARM Cortex-A7 @ 1.4GHz, and Mali-T628 MP6 GPU supporting OpenGL ES 3.0 / 2.0 / 1.1 and OpenCL 1.1 Full profile System Memory – 2GB LPDDR3 RAM PoP @ 750 MHz Storage UHS-1 micro SD slot up to 128GB SATA interface via JMicron JMS578 USB 3.0 to SATA bridge chipset capable of achieving ~300 MB/s transfer rates The case supports 2.5″ drives between 7mm and 15mm thick Network Connectivity – 10/100/1000Mbps Ethernet (via USB 3.0) USB – 1x USB 2.0 port Debugging […]

August 14, 2017August 15, 2017 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

Intel Gemini Lake Block Diagram and Yet More Info

So yesterday, I wrote about some of the new features of Intel Gemini Lake processors like native HDMI 2.0, 4-wide pipeline, 10-bit VP9, and possible built-in 802.11ac wireless controller. I went to bed, and somehow this morning I woke up with something that looks like Gemini Lake (GLK) block diagram, and a few more details. So we indeed have HDMI 2.0 output, as well as DP 1.2a and eDP 1.4, and an embedded wireless controller via the CNVi (Connectivity Integration Architecture) block for WiFi’s MAC and Bluetooth’s MAC + Baseband modem. We’ll have plenty of USB 3.0 host interfaces, and the usual PCIe and SATA 3 interfaces. Still no UFS support, but eMMC 5.1 is supported, as well as x128 DDR4, LPDDR3 and LPDDR4 memory up to 2400 MHz (No ECC support). Cache size is confirmed to be 4MB for up to four GoldMont Plus (GLM+) cores, which combined with […]

August 3, 2017December 8, 2017 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

Unistorm AK1 Intel Celeron J3455 mini PC Sells for $158

Last month, I wrote about MeLE PCG35 Apo mini PC based on Intel Celeron J3455 “Apollo Lake” processor. It has started to sell for $179 this week, but there’s now a cheaper option with similar specifications thanks to Unistorm AK1 mini PC going for $158.30 instead. Unistorm AK1 mini PC specifications with highlights in bold or stricken-through showing differences with PCG35 Apo: SoC – Intel Celeron J3455 quad core “Apollo Lake” processor @ 1.50 / 2.30 GHz with a 12 EU Intel HD Graphics 500 @ 250/750 MHz (10W TDP) System Memory – 4GB LPDDR3 Storage – 32GB eMMC flash, 1x 2.5″ SATA HDD slot, 1x mSATA SSD slot, 1x micro SD slot Video Output – HDMI 1.4 up to 4K @ 30 Hz, and VGA Audio – Via HDMI, 3.5mm headphone jack Connectivity – Gigabit Ethernet, dual band 802.11b/g/n/ac WiFi & Bluetooth 4.0 USB – 2x USB 3.0 ports, […]

July 26, 2017July 27, 2017 by Jean-Luc Aufranc (CNXSoft) - 9 Comments

Beelink S1 Mini PC Comes with Up to 8GB RAM, Supports M.2 SSD & SATA Storage, and Cortana via a Built-in Microphone

While many Apollo Lake mini PCs are sold by Chinese manufacturers, few of come with up to 8GB RAM, and include an internal 2.5″ SATA bay. But Beelink S1 mini PC does, and it also include an M.2 SSD slot, so you can have fast storage for the operating system using an SSD, and cheap and larger storage for your data with the SATA bay. If you are a fan of voice commands, a built-in microphone working with Cortana is also included. Beelink S1 mini PC specifications: SoC – Intel Celeron N3450 quad core Apollo Lake processor @ 1.10 GHz / 2.20 GHz (Burst frequency) with 12 EU Intel HD graphics 500 @ 200/700 MHz (6W TDP) System Memory – 4 or 8 GB DDR3 Storage – 64 GB eMMC flash, internal SATA bay, M.2 SSD slot up to 512 GB, micro SD card slot up to 128GB Video Output […]

July 12, 2017July 12, 2017 by Jean-Luc Aufranc (CNXSoft) - 12 Comments

Xnano X5 4K TV Box with Gigabit Ethernet, HDMI Input, USB 3.0, and SATA Goes for $68 and Up

Realtek RTD1295 processor allows for 4K TV boxes with DVR and PiP function through HDMI input, and USB 3.0 and SATA 3.0 storage interfaces. I previously reviewed Zidoo X9S and EWEAT R9 Plus based on the solution, and I especially liked support with NAS function through OpenWrt running side-by-side with Android 6.0. Those are high-end devices that cost well over $100, but we’ve recently seen cheaper models, likely with less refined firmware, no metal case, and possibly lacking OpenWrt that go as low as $78 shipped with LAKE I Home Cloud TV box. We can now get an even cheaper model, albeit with just 1GB RAM and 8GB flash, thanks to Xano X5 sold for $68.32 including shipping on Aliexpress. There’s also a 2GB/16GB version on the same page going for $82.76. Xnano X5 Smart Box specifications: SoC – Realtek RTD1295 quad core Cortex A53 processor with ARM Mali-T820 MP3 […]

July 6, 2017July 28, 2017 by Jean-Luc Aufranc (CNXSoft) - 13 Comments

Vorke Z3 Rockchip RK3399 TV Box Review – Part 2: Android 6.0 Firmware

Vorke Z3 is another mini PC / TV box powered by Rockchip RK3399 hexa core processor with two Cortex A72 cores, and two Cortex A53 cores making it theoretically one of the fastest TV boxes on the market, excluding NVIDIA Shield Android TV which is well ahead of the competition, albeit with poor worldwide availability. I’ve have already shown Vorke Z3 hardware inside out, so in the second part of the review, I’ll focus on testing the firmware including video playback, and the system performance, and see how it compares to the similar Yundoo Y8, which I reviewed last month. First Boot, Setup, and First Impressions One the selling point of Vorke Z3 is its SATA connector, so I connected a 1TB 3.5″ SATA drive first, as well as Seagate USB 3.0 drive (1TB) to the USB 3.0 port, I also added a USB hub to connect a USB keyboard, […]

July 5, 2017July 4, 2017 by Jean-Luc Aufranc (CNXSoft) - 39 Comments

$45 Hisilicon Hi3535 Based Network Video Recorder Board Comes with HDMI, VGA, Dual SATA, GbE, and USB 3.0 Ports

Network Video Recorder (NVR) boards allow you to record videos from IP cameras to a SATA drive, and display them in a mosaic for monitoring & security. One of such boards is XiongMai NBD7024T-P powered by a Hisilicon Hi3535 dual core Cortex A9 processor, and featuring Gigabit Ethernet, SATA, and USB 3.0 interfaces, on top of HDMI and VGA video output and stereo audio output. With such features, this type of board could likely be re-purposed for other applications, such as a NAS setup too,and they are fairly inexpensive going for $45 including shipping on Aliexpress. NBD7024T-P NVR board specifications: SoC – Hisilicon Hi3535 dual core Cortex A9 processor @ 1.0 GHz System Memory – 4Gbit (512MB) RAM Storage – 2x SATA ports up to 8TB each, maybe some SPI flash for firmware Video Output – 1x HDMI, 1x VGA Audio Output – 2x RCA jacks for stereo audio Video […]

June 29, 2017 by Jean-Luc Aufranc (CNXSoft) - 10 Comments

NFV PicoPod is a Cluster of Six MACCHIATOBin Networking Boards for OPNFV, ODP, DPDK and OPF

If you are interested in networking applications, you may have already heard about Marvell ARMADA 8040 based SolidRun MACCHIATOBin board with multiple 10Gbps and Gbps network interfaces, three SATA ports, and more. PicoCluster has decided to make a cluster of 6 MACHIATOBin boards coupled with a Marvell Prestera DX 14 port, 10GbE switch for OpenDataPlane (ODP), Data Plane Development Kit (DPDK), OpenFastPath(OPF) as well as OPNFV (Open Platform for Network Functions Virtualization) . The main features of the full assembled kit – named Cube – include: 6x MACCHIATOBin quad core Cortex A72 boards (24 cores in total) 1x Prestera DX 10GbE 14-port switch board 6x fans Power Supply Acrylic case The cluster kit comes with 64GB micro SD cards pre-loaded with the latest OPNFV Danube software release for ARM integrated by ENEA Software AB. The cluster is said to be compliant with the OPNFV Pharos specification. Three pre-order options are […]