sata News - Page 22 of 28 - CNX Software

September 23, 2016April 16, 2018 by Jean-Luc Aufranc (CNXSoft) - 48 Comments

Marvell ESPRESSOBin Board with Gigabit Ethernet, SATA, mini PCIe, and USB 3.0 To Launch for $39 and Up (Crowdfunding)

I can often read people hoping for an inexpensive community board for network, storage and connectivity applications with high speed interface like SATA, multiple Gigabit Ethernet port, USB 3.0 and/or mini PCIe, and that’s exactly what Globalscale Technologies is about to offer with their Marvell ARMADA 3700 based ESPRESSOBin development board to go for $39 and up via Kickstarter. Marvell ESPRESSOBin board specifications: SoC – Marvell Armada 3700LP (88F3720) dual core ARM Cortex A53 processor up to 1.2GHz System Memory – 512MB DDR3 or optional 1GB DDR3 Storage – 1x SATA interface, 1x micro SD card slot with footprint for an optional 4GB EMMC Network Connectivity 1x Topaz Networking Switch 2x GbE Ethernet LAN 1x Ethernet WAN 1x MiniPCIe slot for Wireless/BLE periphereals USB – 1x USB 3.0, 1x USB 2.0, 1x micro USB port Expansion – 2x 46-pin GPIO headers for accessories and shields with I2C, GPIOs, PWM, UART, […]

September 12, 2016June 18, 2018 by Jean-Luc Aufranc (CNXSoft) - 11 Comments

Hisilicon Hi3798M V200 SoC to Allow for Cheaper 4K TV Boxes with Gigabit Ethernet, SATA, and/or USB 3.0

One year after Hisilicon Hi3798C V200 processor was unveiled at IBC 2015, Hisilicon has now introduced a cost down version named Hisilicon Hi3798M V200 at IBC 2016 with a lower-end Mali-450 GPU, only 2 TS input interfaces, one less USB 3.0 interface, and only 1x GMAC (Gigabit Ethernet MAC) or 1x Fast Ethernet PHY, instead of two GMAC interfaces. The processor also adds 1080p30 H.265 video encoding. Hisilicon Hi3798M V200 key features: CPU – Quad core Cortex A53 processor (15K DMIPS) GPU – ARM Mali-450 + Hisilicon dual-core GPU Memory I/F – 32-bit DDR3/3L/4 Storage I/F – eMMC/NAND/SPI, 1x SATA 3.0, 2x SDIO Video Engine (VPU) HiVXE 2.0 video engine supporting 4Kp60 10-bit H.265 and VP9 decoding, 4Kp30 H.264, MPEG-2, MPEG-4, VC1, VP6/VP8, Real Media 8/9/10 Encoder – H.264/H.265 @ 1080p30 or dual 720p30 Imprex 2.0 processing engine with support for HDR10 & HLG high dynamic range, BT.709/BT.2020, etc.. Peripherals: […]

September 7, 2016October 23, 2016 by Jean-Luc Aufranc (CNXSoft) - 28 Comments

Zidoo X9S (Realtek RTD1295) Android TV Box Review – Part 1: Unboxing and Teardown

Zidoo X9S is one of the first Realtek RTD1295 based TV boxes coming to market, and it has some pretty special features like running both Android 6.0 and OpenWrt simultaneously, HDMI input support for video recording and PiP, an external SATA interface, 4K media capabilities including HDMI 2.0a output, 4K 60 fps H.265 and VP9 & 4K 24 Hz H.264 video decoding, as well as HDR and 3D support. You can find the full Zidoo X9S specification in my previous post. The company has now sent me an early review sample, and in the first part of the review you’ll post photos of the devices and accessories, and perform a teardown to find out more about the electronics and thermal design. Later on I’ll publish articles with benchmarks, video performance, and the complete review. Zidoo X9S Unboxing The box comes in a light green retail package showing some of the […]

August 17, 2016August 17, 2016 by Jean-Luc Aufranc (CNXSoft) - 26 Comments

Allwinner R40 Quad Core ARM Processor, Successor of Allwinner A20, Supports SATA & Gigabit Ethernet

One of the most common complaints I get from readers when I publish news about new ARM processor is “Why didn’t they include SATA?”. So far Allwinner A20 is the only really low cost ARM processor that includes a SATA port, but it’s been released a few years, and its dual core Cortex A7 processor is getting old. We’ve been hearing rumors about an upgraded version for one or two years with Allwinner A40 or more recently Allwinner A20E, and finally the company has now published details about Allwinner R40 processor on their revamped website, which they claim to be the successor of Allwinner A20. Allwinner R40 key specifications: CPU – Quad-core ARM Cortex-A7 Processor GPU – Mali-400 MP2 GPU Memory I/F – 32-bit DDR3/DDR3L/LPDDR2/LPDDR3 Storage I/F – 8-bit NAND flash, SD3.0, eMMC 5.0, and 1x SATA Networking – 2x MAC: 1x EMAC (10/100M Ethernet), 1x GMAC (Gigabit Ethernet) Display […]

August 3, 2016 by Jean-Luc Aufranc (CNXSoft) - 11 Comments

SolidRun ClearFog Base is a $90 Router/Networking Board with USB 3.0, M.2, mSATA, and Gigabit Ethernet Support

SolidRun introduced ClearFog Pro and Base board based on Marvell Armada 380/388 processor at the end of last year, but at the time, only the higher-end ClearFog Pro board was available for $170 and up. Now the company has officially launched the cheaper ClearFog Base board based on the same processor, two Gigabit Ethernet RJ45 ports, one SFP cage, a USB 3.0 port, an M.2 slot, mPCIe expansion slot, and more. ClearFog Base board specifications: Processor – Marvell ARMADA 388 (88F6828) dual core ARMv7 processor (Cortex A9 class) @ up to 1.6 GHz with 1MB L2 cache, NEON and FPU System Memory – 1GB RAM by default (2GB optional) Storage – 1x micro SD slot, optional 4GB eMMC flash, 1x M.2 slot, 1x mSATA/mPCIE Connectivity – 2x dedicated Gigabit Ethernet ports, 1x SFP cage USB – 1x USB 3.0 port Expansions 1x mini PCI Express slots (shared with mSATA ) 1x […]

July 24, 2016 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

EBox T8-4 Review – A 4K Android TV Box Bundle Geared Towards the UK Market

I’ve already taken some pictures of the device and board in part 1 of EBox T8-4 review, so today, I’m going to report my experience with the Android 5.1 firmware for this Amlogic S905 TV box, air mouse, and wireless gamepad, specifically targetted to users leaving in the United Kingdom, but since the hardware is based on Zoomtak T8V, it may also be informative to international users, although the firmware, mostly launcher and IPTV services, will be different. EBox T8-4 Setup Wizard & Configuration Since I’ve already inserted an internal SSD into the SATA bay of the device, I did not connect an external USB harddrive, and only connected HDMI and Ethernet cables, plus the RF dongle for the included air mouse, a USB keyboard to easily take screenshots, and of course the power cord. The power button will be red at this stage. If you want to start the […]

July 16, 2016September 9, 2016 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

Intel Atom C3000 “Denverton” Processor Targets Low Power Servers

[Update: Some pictures have been removed due to some NDA issues] Intel Atom “Avoton” server processors are the equivalent of Bay Trail processor for mini PCs, laptops and tablets, and with the upcoming release of Apollo Lake processors, Intel has a matching family codenamed “Denverton” that will be used in servers and NAS. Information about the new processors is scarce, but Anandtech spotted an early motherboard prototype last month at Computex. MA10-ST0 motherboard main specifications: SoC – Intel Atom C3000 “Denverton” processor with 4 to 16 cores @ 1.8 GHz; QKP2 code; 14nm process System Memory – 4x RDIMM/UDIMM slots for DDR4 @ 2400 MHz Storage – 4x SATA 3.0 breakout ports supporting up to 16 drives (8x shared with PCIe slot); 32GB eMMC flash Video Output – VGA Connectivity – 2x 10GbE SFP+ ports; 2x Gigabit Ethernet RJ45 ports (via Intel I210); 1x extra RJ45 port (for management?) USB […]

July 2, 2016 by Jean-Luc Aufranc (CNXSoft) - 40 Comments

Review of Vorke V1 mini PC Powered by Intel Celeron J3160 Processor

After checking out Vorke V1 mini PC hardware in the first part of the review, it’s now time to publish the review starting with system information, benchmarks, and user testing. The device competes with similarly priced devices based on Intel Atom x7 processor such as Voyo V3 and Beelink BT7, so I’ll also include some comparisons to those in the review. Setup and System Information I connected USB keyboard and mouse, an Ethernet cable, HDMI and VGA cables to check dual display support, as well as the power supply. I did not connect my USB 3.0 hard drive since, I’ve already fitted the mini PC with an internal 1TB hard drive. Pressing on the large power button on the top of the device will boot it, and after a few seconds, you’ll get to go through Windows 10 setup by first accepting the EULA. The next steps are Custom or […]