Single Board Computer News - Page 59 of 89 - CNX Software

July 15, 2020 by Jean-Luc Aufranc (CNXSoft) - 8 Comments

GloDroid Brings Android 10 OS to Raspberry Pi 4, Orange Pi SBC’s, PinePhone, and PineTab

The community of developers working on software for single board computers often prefer to focus on Linux support, as companies will often provide Android firmware images. But those Android OS images are often not maintained at all, so we’ve seen some projects like the past such as H3droid bringing a better Android OS to Allwinner H3 and H2+ boards and devices. The project is still using Android 4.4 KitKat and that’s getting old with some apps like the latest version of Kodi not working anymore. But a new project has just been brought to my attention with GloDroid leveraging AOSP to bring Android 10 to various Allwinner based boards and platforms, as well as Raspberry Pi 4B. List of supported Allwinner hardware: Allwinner H3 (32-bit) based – Orange Pi Plus 2 SBC, Orange Pi Plus 2E board, Orange Pi PC Allwinner H5 (64-bit) based – Orange Pi Prime, Orange Pi […]

July 13, 2020July 13, 2020 by Jean-Luc Aufranc (CNXSoft) - 9 Comments

Ignitial Tukhla High-End Open Source Hardware NXP i.MX 8QuadMax SBC in the Works

[Update: The European company that initiated the project is Ignitial based in the west of France. So while we refer to the board as Olimex Tukhla in the post, it will be offered as Ignitial Tukhla once it becomes available] Most open-source hardware Arm Linux SBCs are optimized for cost, and there are few higher-end boards with extensive connectivity designed for professionals. Beagleboard X15 would be one of the rare examples currently available on the market, but it was launched five years ago. One European company noticed the void in this market and asked Olimex to develop a high-end open-source Linux board with a well-documented processor. They ruled out RK3399, and instead went Olimex Tukhla SBC will be powered by NXP i.MX 8QuadMax, the top processor of i.MX 8 family with two Cortex-A72 cores, four Cortex-A53 cores, and two real-time Cortex-M4F cores. As you can see from the screenshot above, […]

July 11, 2020 by Jean-Luc Aufranc (CNXSoft) - 41 Comments

NanoPi NEO3 Headless SBC Launched for $20 and up

Last month, we found out FriendlyELEC was working on NanoPi NEO3, a tiny SBC powered by Rockchip RK3328 processor and made for headless applications and networked storage thanks to Gigabit Ethernet and USB 3.0 ports, as well as a 26-pin GPIO header. At the time, the board was still been finalized, but the company has now started to take orders for $20 and up depending on options which include a cute white enclosure.. Here’s a quick reminder of NanoPi NEO3 specifications: SoC – Rockchip RK3328 quad-core Arm Cortex A53 processor with Mali-450MP2 GPU System Memory – 1GB or 2GB DDR4 Storage – MicroSD Slot for system boot and storage Video Output – N/A Connectivity – Gigabit Ethernet with unique MAC via RTL8211E PHY USB – 1x USB3.0 Type-A port, 2x USB2.0 on 2.54mm 8-pin header Expansion – 26-pin header with I2C, UART, SPI, I2S, GPIO Debugging – 3-pin header for […]

July 9, 2020August 19, 2020 by Jean-Luc Aufranc (CNXSoft) - 12 Comments

ODYSSEY-X86J4105 SBC Unboxing and Re_Computer Case Review

ODYSSEY-X86J4105 Re_Computer Case Review

Seeed Studio ODYSSEY-X86J4105 is an Intel Celeron J4105 Gemini Lake SBC that also happens to integrate an Arduino compatible Microchip SAMD21 Arm Cortex M0+ microcontroller that makes it suitable as an all-in-one Arduino platform. But it can do much more with 8GB RAM, an optional 64GB eMMC flash, HDMI & USB-C DisplayPort 4K video outputs, dual Gigabit Ethernet, and support for both SATA and NVMe storage. The board runs Windows 10 Enterprise by default (if you purchase the board with an eMMC flash), and supports Linux distributions as well. Seeed Studio sent me a review sample, so I’ll start by checking out the hardware first. ODYSSEY-X86J4105 Unboxing I received ODYSSEY-X86J4105864 with a built-in 64GB eMMC flash pre-loaded with Windows 10 Enterprise. Let’s have a quick look at the board with USB, Ethernet and video output ports previously described, as well as built-in dual-band Wi-Fi 5 & Bluetooth 5.0 module, and […]

July 5, 2020 by Jean-Luc Aufranc (CNXSoft) - No Comments

Upcoming SAVVY-V Open Source RISC-V Cluster Board Supports 10GbE via Microsemi PolarFire 64-bit RISC-V SoC

SAVVY-V Open Source-PolarFire RISC-V SOC FPGA Board

RISC-V based PolarFire SoC FPGA by Microsemi may be coming up in the third quarter of this year, but Ali Uzel has been sharing a few details about SAVVY-V advanced open-source RISC-V cluster board made by FOSOH-V (Flexible Open SOurce Hardware for RISC-V) community of developers. It’s powered by Microsemi Polarfire RISC-V SoC MPFS250T with four 64-bit RISC-V cores, a smaller RV64IMAC monitor core, and FPGA fabric that allows 10GbE via SFP+ cages, and exposes six USB Type-C ports. The solution is called a cluster board since up to six SAVVY-V boards can be stacked via a PC/104+ connector and interfaced via the USB-C ports. SAVVY-V cluster board preliminary features and specifications: SoC – Microsemi Polarfire RISC-V SoC MPFS250T with a quad-core 64-bit RV64IMAFDC (RV64GC) processor @ up to 667 MHz, a RV64IMAC monitor core, and FPGA fabric with 250K logic elements; 3.0 CoreMarks/MHz, 2.0 DMIPs/MHz; Also compatible with MPFS160T, […]

June 29, 2020June 29, 2020 by Jean-Luc Aufranc (CNXSoft) - 30 Comments

Tiny NanoPi NEO3 SBC Targets Networked Storage with GbE and USB 3.0

Once upon a time, FriendlyELEC launched a Raspberry Pi Zero competitor for headless applications with Allwinner H3 powered NanoPi NEO, which was then followed with NanoPi NEO2 equipped with a more powerful Allwinner H5 processor and Gigabit Ethernet, and less than two years ago, NanoPi NEO4 was launched with Rockchip RK3399 hexa-core processor, 1GB RAM, and HDMI output. “Wait! What happened to NanoPi NEO3?!” you may ask. It probably got lost in the woods, but FriendlyELEC found it under a rock, and are about to launch NanoPi NEO3 SBC based on Rockchip RK3328 and offering a USB 3.0 port and Gigabit Ethernet network connectivity. NanoPi NEO3 specifications: SoC – Rockchip RK3328 quad-core Arm Cortex A53 processor with Mali-450MP2 GPU System Memory – 1GB or 2GB DDR4 Storage – MicroSD Slot for system boot and storage Video Output – N/A Connectivity – Gigabit Ethernet with unique MAC via RTL8211E PHY USB […]

June 22, 2020June 22, 2020 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

Orange Pi 4 Metal Enclosure Launched for $10

Orange Pi 4 and Orange Pi 4B, the latter further adding a Gyrfalcon 2801S AI accelerator chip, were launched in late 2019 for as little as $50 with 4GB RAM making those some of the most affordable Rockchip RK3399 SBC’s on the market. Since then, Shenzhen Xunlong Software launched some extra accessories for the board including a PCIe expansion board with a mini PCIe socket, and a SIM card slot, and very recently a Rockchip RM310 4G LTE modem to go along. The latest addition is a metal enclosure made of aluminum alloy and suitable for either version of the board. The enclosure is fairly compact with fins on top for cooling and openings for the 40-pin GPIO header and PCIe connector. Talking about PCIe, it would have been nice if they also make a case capable of taking their PCIe adapter board, but that would be for another time. […]

June 18, 2020June 18, 2020 by Jean-Luc Aufranc (CNXSoft) - 23 Comments

ODROID-H2+ SBC Gets Celeron J4115 Processor, Offers 2.5GbE Networking

Harkernel ODROID-H2 is an Intel Celeron J4105 Gemini Lake powered SBC that offers great value and performs reasonably well as we’ve seen in our ODROID-H2 Ubuntu review. But there’s an upgraded model coming soon with ODROID-H2+ getting a slightly faster Intel Celeron J4115 processor, 2.5 GbE networking, a couple of extra I/O on the header for USB 2.0 and HDMI CEC, and a change to the 12V SATA power circuit to improve the suspend-resume power control sequence of 3.5″ HDDs. ODROID-H2+ specifications: SoC – Intel Celeron J4115 Gemini Lake Refresh quad-core processor @ 1.8 GHz / 2.5 GHz (turbo single thread) / 2.3Ghz (turbo multi-thread) with 12EU Intel UHD Graphics 600 up to 700 MHz; Noted listed on Ark Intel just yet, but it’s real. System Memory – Dual-channel Memory DDR4-PC19200 (2400MT/s) supporting up to 32GB RAM in total Storage – M.2 PCIe 2.0 x4 slot for one NVMe storage, […]