smart city News - Page 5 of 6 - CNX Software

December 31, 2021 by Jean-Luc Aufranc (CNXSoft) - No Comments

COM Express Type 10 Tiger Lake UP3 module targets embedded mobile applications

AAEON NanoCOM-TGU is a COM Express Type 10 module powered by the 11th generation Intel Tiger Lake UP3 designed for embedded mobile applications, potentially leveraging AI and Deep Learning acceleration engines from the processor with use cases ranging from telematics, Smart Cities, and industrial automation. The NanoCOM-TGU supports up to 16GB LPDDR4x memory with in-band ECC, up to 256GB PCIe NVMe SSD, and offers two SATA 3.0 interfaces, 2.5GbE networking, DDI and eDP video outputs, as well as ten USB ports and four PCI Express x1 interfaces. NanoCOM-TGU specifications: SoC – Intel Tiger Lake UP3 “E” or “GRE” processor with Intel UHD Graphics from Celeron 6305E up to Core i7-1185G7E/1185GRE @ 1.8 GHz /4.4 GHz; 15W TDP System Memory – Up to 16GB onboard LPDDR4x-4266 memory in-band ECC supported by SoC Storage – Up to 256GB onboard NVMe SSD Networking – Intel i225-LM 2.5GbE controller COM Express Type 10 […]

December 5, 2021 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Eigencomm EC616/EC616S SoC supports Cat-NB2 cellular IoT

Eigencomm EC616/EC616S are Cortex-M3 microcontrollers supporting the 3GPP R13/R14 NB-IoT standard, with 3GPP R14 notably introducing the newer LTE Cat-NB2 standard allowing higher bitrates up to 127 kbps downlink, and up to 159 kbps uplink, and OTDOA and E-CID positioning methods. Both EC616 and EC616S are virtually identical, but the EC616S comes with fewer GPIOs and is designed for the lowest possible BoM cost for modules as small as 10×10 mm. Both target similar IoT applications such as wireless meter reading, smoke detection, smart street lights, smart logistics, asset tracking, smart fire monitoring, smart parking, smart home, wearable devices, industry 4.0, smart agriculture, and others. Eigencomm EC616/EC616S specifications: MCU core – Arm Cortex-M3 @ up to 204 MHz Frequency band – 663 MHz to 2200 MHz Protocol version – 3GPP R13/R14 Built-in PA output power – 23dBm Receiver sensitivity – EC616: -118 dBm, EC616S: -117 dBm Peripherals EC616 – 2x […]

November 10, 2021 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

NXP i.MX 93 processor combines Cortex-A55 cores with Ethos U65 microNPU

NXP has unveiled the i.MX 93 processor family comprised of i.MX 935x, 933x, 932x, and 931x parts at this time with up to two Cortex-A55 cores, one Arm Cortex-M33 real-time core, as well as an Ethos U65 microNPU for machine learning (ML). We wrote about i.MX 9 family back in March with NXP telling us it would include an Arm Ethos U-65 microNPU and EdgeLock secure enclave, be manufactured with a 16/12nm FinFET class process, and includes the “Energy Flex” architecture to optimize power consumption by turning on/off specific blocks in the processor. The NXP i.MX 93 is the first family leveraging those new features, and we know have some more details. NXP i.MX 93 processor specifications: CPU 1x or 2x Arm Cortex-A55 @ 1.7 GHz with 32KB I-cache, 32KB D-cache, 64KB L2 cache, 256KB L3 cache with ECC 1x Arm Cortex-M33 @ 250 MHz low power microcontroller with 256KB […]

September 24, 2021April 26, 2022 by Jean-Luc Aufranc (CNXSoft) - No Comments

SolidSense N8 IoT Compact gateway supports Wirepas Massive

SolidRun “SolidSense N8 IoT Compact” is a Linux Edge gateway based on NXP i.MX 8M Nano Solo processor that offers Gigabit Ethernet, WiFi 5, Bluetooth 5.0, and optional 4G LTE Cat 4 & GPS connectivity, plus Wirepas Massive (previously Wirepas Mesh networking) via a module based on Nordic Semi nRF52832 wireless Cortex-M4 microcontroller. The gateway comes with 1GB RAM, 8GB storage, offers optional RS485 and CAN interfaces, and targets IoT applications such as smart metering, automation, asset tracking, safety & security, and smart buildings. SolidSense N8 IoT Compact gateway SolidSense N8 IoT Compact specifications: SoC – NXP i.MX8M Nano single core Arm Cortex A53 @ 1500MHz + Cortex M7 @ 650MHz System Memory – 1GB DDR3 Storage – 8GB eMMC flash, MIcroSD card slot Connectivity Gigabit Ethernet RJ45 port with optional PoE support 802.11 a/b/g/n/ac WiFi 5 and Bluetooth 5.0 Optional 4G LTE Cat 4 (Global) + GPS with fallback […]

September 23, 2021July 9, 2022 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

Gateworks GW16146 is an 802.11ah WiFi HaLow Mini PCIe module

GW16146v3 802.11ah WiFi Halow mPCIe module

Gateworks GW16146 is an 802.11ah WiFi HaLow Mini PCIe card designed to provide long-range wireless to IoT applications utilizing the company’s Venice and Newport single board computers. We first noticed 802.11ah WiFI LPWAN standard operating at 900 MHz for the Internet of Things in 2014, followed by Newracom NRC6101 chip in 2015, and the following year the Wi-Fi Alliance decided to call the new standard “Wi-Fi HaLow“. I was expecting it to compete with the likes of LoRa and NB-IoT, but I have not heard much about it, and when I asked a WiFi module and board supplier earlier this year, they seemed surprised I would even be interested in this type of hardware and, obviously, did not have any… So it’s good to see some new hardware coming out. Gateworks GW16146 specifications: 802.11ah Halow connectivity Silex SX-NEWAH 802.11ah Module based on Newracom NRC7292 System-on-Chip (US only) Compliant with IEEE […]

September 8, 2021September 25, 2021 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

iBASE MI989 – 5G-ready Ryzen V2000 Mini-ITX motherboard offers PCIe x16 & M.2 expansion

We’ve written about Ryzen Embedded V2000 mini-ITX motherboards in the past, but here’s another one with iBASE MI989 equipped with four 4K-capable DisplayPort 1.4 video output, two Gigabit Ethernet ports, three M.2 sockets including a 5G-ready M.2 3052 socket, and a PCIe x16 slot for expansion. iBASE MI989 also supports up to 64GB ECC memory, one SATA III port, multiple USB 3.1/2.0 ports, four serial ports, and more, for embedded applications in retail, healthcare, industrial automation, casinos, and smart cities. iBASE MI989 specifications: SoC – AMD Ryzen V2000 Series Processors either: AMD Ryzen Embedded V2748, 8C/16T up to 2.9GHz (4.25GHz) with 4MB cache, 7 CU Radeon Vega graphics; 45W TDP AMD Ryzen Embedded V2718, 8C/16T up to 1.7GHz (4.15GHz), with 4MB cache, 7 CU Radeon Vega graphics; 15W TDP System Memory – Up to 64GB dual-channel DDR4-3200 (ECC/non-ECC) via 2x SODIMM sockets Storage – 1x SATA 3.0 (up to 6GB/s) […]

September 3, 2021September 25, 2021 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

OpenRemote fully open-source IoT platform targets OEMs and DIY projects

OpenRemote claims to be a 100% open-source IoT platform suitable for DIYs as well as OEMs. The asset management platform can help with the tracking of vehicle fleets, energy systems, or crowds, help to build smart cities, smart buildings, smart airports, and more. While most cloud IoT platforms rely on open-source tools, the software hosted on the providers’ servers is usually closed-source as we’ve seen in our comparison between Microsoft Azure IoT, Balena, and Particle, but OpenRemote is different will the full stack being released under an AGPLv3 open source license. OpenRemote 3.0 software is comprised of four main blocks: The Frontend is comprised of Consoles (native iOS and Android apps), Web components and Templates, as well as a System Administration interface used to create dashboards and control panels. Manager – headless Java application to capture the current asset states and includes Asset Management, State & Historical Data, Event Processing […]

August 27, 2021September 25, 2021 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Feature-packed i.MX 8M Plus SBC offers dual GbE, PCIe, RS485, CAN Bus, 4G & 5G modems, and more

We’ve already covered plenty of NXP i.MX 8M Plus systems-on-module and carrier boards, but here’s another solution with Forlinx OKMX8MP-C SBC single board computer based on FETMX8MP-C SoM with 4GB LPDDR4 and 16GB eMMC flash. The feature-packed board also offers dual Gigabit Ethernet, 4G and 5G cellular connectivity support via mPCIe and M.2 sockets, multiple display and camera interfaces, RS485 and CAN Bus connector, USB interfaces, various expansion headers, and more… Forlinx OKMX8MP-C specifications: Forlinx FETMX8MP-C System-on-Module SoC – NXP i.MX8M Plus with quad-core Cortex-A53 processor @ up to 1.6 GHz, Arm Cortex-M7 real-time core, Vivante 2D/3D GPUs, 1080p60 video decoder/encoder, 2.3 TOPS AI accelerator System Memory – 2GB, 4GB (default), 6GB, or 8GB LPDDR4 Storage – 16GB eMMC flash Ultra-thin board-to-board connector (4x 80-pin connector with 0.5mm pitch) Supply Voltage – 5V Temperature Range – -40°C to +85°C Dimensions – 62 x 36 mm (8-layer ENIG PCB) Storage – […]