smart home News - Page 19 of 23 - CNX Software

January 18, 2021January 19, 2021 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

Cybovac S31 Review – A smart robot vacuum cleaner with visual SLAM support

I’ve been asked to review robot vacuum cleaners in the past but refused because they were quite basic with a simple vacuum function, obstacle detection, maybe a mopping function, and not much else. But Kyvol Cybovac S31 is different as it integrates a laser distance sensor (LDS) enabling visual SLAM to create a map of your house, and can be controlled with a mobile app for Android or iOS which ended up even more useful than I initially expected. S31 Smart Robot Vacuum Cleaner Unboxing The package was much bigger than I expected, mostly because the charging station also includes a dust bag where dust from the main unit is automatically vacuumed each time cleaning is complete. Key features of the system as shown above: LDS robot vacuum cleaner (main unit) 4 levels of suction power Cleaning modes – Auto, area, spot, edge Anti-drop and anti-collision features 2.4 GHz WiFi […]

December 21, 2020 by Jean-Luc Aufranc (CNXSoft) - 9 Comments

DIY project creates Zigbee to Ethernet bridge with WT32-ETH01

We previously wrote about Ebyte E180-ZG120B-TB an inexpensive ($9.90) Zigbee 3.0 evaluation board based on Silabs EFR32MG1B Arm Cortex-M4 wireless MCU and the equally cheap ($7.78) WT32-ETH01 ESP32 Ethernet board. What do they have in common? Absolutely nothing! But GitHub user tube0013 decided to connect both boards over UART to create a Zigbee to Ethernet DIY coordinator/bridge running open-source firmware. The hardware also includes a Micro USB adapter for power, several 10cm jumper wires, and he/she also designed a 3D printed case. EZSP-Firmware is used for the Ebyte Zigbee 3.0 board, and ESPHome open-source home automation firmware for the ESP32 board. You’ll also need serial to IP code and ESPHome config. Note that flashing firmware to the Ebyte requires a programmer, and the developer used a J-link EDU Mini together with Silicon Labs’ Simplicity Commander. As mentioned above, a 3D printed case has also been designed, so everything is neatly […]

December 18, 2020December 18, 2020 by Jean-Luc Aufranc (CNXSoft) - 14 Comments

Picovoice supports custom wake word, offline voice recognition on Raspberry Pi

ReSpeaker 4-mic array is a Raspberry Pi HAT with four microphones that can work with services such as Google Assistant or Amazon Echo. It was launched in 2017. So nothing new on the hardware front. What’s new is the expansion board is now supported by Picovoice that works much like other voice assistants except it allows people to create custom wake words and offline voice recognition. Picovoice is described as an end-to-end platform for building customized voice products with processing running entirely on-device. It is cross-platform, is said to be more resilient to noise and reverberation, and thanks to running offline, it offers low-latency and complies with HIPAA and GDPR privacy regulations. The platform is comprised of two main engines: Porcupine lightweight wake word engine that supports custom wake words trained through PicoVoice console. The engine can listen to multiple wake words and is cross-platform with support for Raspberry Pi, […]

December 16, 2020December 17, 2020 by Jean-Luc Aufranc (CNXSoft) - 26 Comments

ODROID-N2+ based “Home Assistant Blue” announced as official hardware for Home Assistant

Home Assistant has announced “Home Assistant Blue” hardware with an enclosure designed by Hahn Werke housing Hardkernel ODROID-N2+ SBC, and software supported by BayLibre who helped upstreaming the code. The goal is to make Home Assistant Blue a fully open-source platform with long-life support. The device was officially announced during the Home Assistant Conference 2020 held a couple of days ago. Home Assistant Blue home automation gateway uses the 4GB DDR4 version of the Amlogic S922X SBC, ships with a 128GB eMMC flash module, and offers Gigabit Ethernet and four USB 3.0 ports. As I understand it, the gateway will run the latest Home Assistant Core 2020.12 that was announced at the conference with a new feature called Blueprints defined as “pre-created automation with user-settable options”, as well as new neural voices for Nabu Casa Cloud TTS (Text-to-Speech), the ability to temporarily disable devices, and more. The release was initially […]

December 15, 2020December 15, 2020 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Yeelight Smart LED Bulb M2 (Multicolor) Supports Google Home Seamless Setup

At the beginning of the year, I reviewed Yeelight Smart LED Bulb 1S with both the Yeelink Android app and Google Home app. The light bulb was one of the first to implement support for Google Home Local SDK which makes controlling the light bulb much faster but requires a Google Home compatible hardware platform such as Google Home Mini smart speaker. Using the light with Google Home app still required a Xiaomi account and go through some hoops, and that’s why Yeelight has now launched the Smart LED Bulb M2 (Multicolor) with support Google Home Seamless Setup. The Yeelight app is not needed anymore, and setup is easier with Google Home. All you need is a Google Assistant-enabled device like a Google Nest Mini or Google Nest Hub. Yeelight Smart LED Bulb M2 specifications: Bulb Interface – E26/E27 bulb Wattage – 8W Brightness – Up to 1000 lumens (equivalent […]

November 19, 2020November 26, 2020 by Jean-Luc Aufranc (CNXSoft) - 17 Comments

Black Friday 2020 International Deals and Coupons

Singles Day 2020 is now behind us, but just like every year, international Black Friday and Cyber Monday deals and coupons are coming, and even already launched over one week before the actual events. And CNX Software will link to promotions from Chinese online websites that offer such deals with Aliexpress, Banggood, GearBest, GeekBuying, and others. Aliexpress Black Friday Fest will start on November 23, 12:00 AM PT, and last till November 27, 11:59 PM PT with up to 70% discounts. But you can also browse the website to find discounts, and add products to your cart before ordering during the event. There will also be $20 and $40 coupons for orders over $40 and $100 respectively, but conditions are unclear at this time. Banggood’s Crazy Friday event takes place during an even longer period between November 2nd and December 6th. There are special sitewide coupons for PayPal payments with […]

November 19, 2020November 25, 2020 by Jean-Luc Aufranc (CNXSoft) - 13 Comments

Shelly Motion sensor to feature Silicon Labs WiFi chip with Bluetooth-like power consumption

[Update: The information from Shelly about a new “Cortana M3” processor is incorrect, we’ve been contacted by Silicon Labs, and there’s no Cortana M3 microcontroller from the company, Shelly is just using one of the company’s Cortex-M3 based WiFi solutions (SoC or module). The article remains unchanged] WiFi is one of the most convenient ways to connect IoT devices as it’s omnipresent, low-cost, and the range is ideal for the typical smart home. That’s all good until you start to power the device with a tiny battery, as WiFi consumes much more power than Zigbee, Z-Wave, or Bluetooth. Over five years ago, Rockchip RKi6000 WiFi SoC promised Bluetooth 4.0 LE power consumption numbers allowing coin-cell powered WiFi devices, and there were some demos the following year, but I’ve yet to see a consumer device based on the solution. This brings me to the main topic of this post: Shelly Motion, […]

November 13, 2020 by Jean-Luc Aufranc (CNXSoft) - No Comments

OPTIGA Trust-M evaluation kit for Raspberry Pi targets Connected Home over IP standard

Optiga Trust-M evaluation-kit-Raspberry-Pi-Connected Home over IP standard

Last December, we reported that Amazon, Apple, Google, and the Zigbee Alliance had partnered to create Project Connected Home over IP (CHIP) working group with the goal of developing a royalty-free, secure Smart Home standard to increase compatibility among products over WiFi, Ethernet, Bluetooth LE, Cellular, 802.15.4 and others community protocol. Infineon has now unveiled OPTIGA Trust-M evaluation kit for Raspberry Pi designed to experiment with Connect Home over IP standard and comprised of Infineon Shield2Go HAT/adapter board, and OPTIGA Trust-M Security Shield2Go board equipped with Infineon OPTIGA Trust-M “Common Criteria Certified EAL6+” security controller. The Shield2Go adapter just re-routes the 40-pin Raspberry Pi header I/Os to sockets compatible with Infineon boards and a prototyping area. So the most important part is OPTIGA Trust-M Shield2Go which supports the following: X.509 certificates Device authentication Cryptographic support ECC NIST curves up to P-521, Brainpool r1 curve up to 512 RSA up to […]