som News - Page 38 of 73 - CNX Software

September 29, 2019September 29, 2019 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

TechNexion XORE is a tiny NXP i.MX 8M Mini LGA System-on-Module

There are several ways to design a system-on-module to carrier board interface, and the most common solutions are edge connectors (e.g. SO-DIMM), board-to-board connectors (placed under the module), and castellated holes where the board is soldered directly to the baseboard. Another less common method is to design an LGA (Land Grid Array) module, which also have to be soldered straight unto the carrier board, but enables much more compact system-on-modules, and that’s exacty what TechNexion has done with their XORE family of LGA system-on-module currently powered by the 14-nm NXP i.MX 8M Mini processor. XORE-IMX8M-Mini Module TechNexion XORE module specifications: SoC (one of the other) NXP i.MX8M Mini Solo single Arm Cortex-A53 @ 1.8 GHz + M4 processor, Vivante GC7000Lite 3D GPU NXP i.MX8M Mini Dual 2x Arm Cortex-A53 @ 1.8 GHz + M4 processor, Vivante GC7000Lite 3D GPU NXP i.MX8M Mini Quad 4x Arm Cortex-A53 @ 1.8 GHz + M4 […]

September 25, 2019 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Geniatech SOM3399 RK3399 SoM Complies with 96Boards System-on-Module Specification

96boards System-on-Module specification was introduced last April together with their first SOM-CA (2x board-to-board connectors) and SOM-CB (4x board-to-board connectors), namely TB-96AI & TB-96AIoT modules powered by respectively AI capable Rockchip RK1808 and RK3399Pro processors that would fit into a compatible baseboard. Those started to ship early this summer, and there’s now a new module that complies with 96Boards SoM specification courtesy of Geniatech SOM3399 powered by a Rockchip RK3399 hexa-core processor without the extra NPU / AI accelerator found in the aforementioned modules. Geniatech SOM3399 Specifications: SoC – Rockchip RK3399 dual-core Cortex-A72 up to 1.8GHz, quad-core Cortex-A53 up to 1.4GHz, Mali-T860 MP4 GPU with support for OpenGL ES1.1/2.0/3.0, OpenCL1.2, DirectX11.1 System Memory – 2GB LPDDR4 (4GB as option) Storage – 8GB eMMC flash (16, 32, and 64GB as option) Board-to-board connector – 4x 100-pin high-speed connectors (X1, X2, X3, and X4 as defined by the spec) with USB 3.0, […]

September 18, 2019 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Boardcon Idea3399 Features-Rich SBC Comes with M.2 NVMe SSD and 4G LTE PCIe Sockets

Back in 2017, Boardcon introduced EM3399 single board computer powered by a Rockchip RK3399 processor through the company’s PICO3399 SO-DIMM system-on-module. They’ve now designed another RK3399 SBC – Idea3399 – comprised of a baseboard and module, but instead of re-using the SO-DIMM module, CM3399 system-on-module with castellated holes was used instead. The new board comes with many of the same features as their first board but adds an M.2 NVMe SSD slot and mPCIe socket for 4G LTE modem on the back of the board. CM3399 SoM Key features and specifications: SoC – Rockchip RK3399 dual Cortex-A72 @ 1.8GHz + quad Cortex-A53 @ 1.4GHz System Memory – 4GB LPDDR4 Storage – 8GB eMMC flash 202 castellated pin (1.3mm pitch) with USB2.0 host, USB3.0 host, USB OTG, UART, MIPI, Ethernet, SPI, HDMI out, I2C, I2S, PCI Express, SDIO, SD/MMC, eDP, Camera, PWM, ADC IN, etc… Power – Supply Voltage: 5V; RK808 […]

September 13, 2019September 13, 2019 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Raspberry Pi CM3+ based EagleEye Smart Camera Works with OpenCV and LabVIEW NI Vision

Raspberry Pi CM3 Industrial Smart Camera

We previously covered Q-Wave Systems’ Melon S3 board combining a Xilinx Spartan 3E FPGA with ESP8266, but the Thai company is back is a completely different product: EagleEye Smart Camera. The board is powered by Raspberry Pi Compute Module 3+ (CM3+) with 16GB or 32GB flash, and equipped with a 5 MP camera for machine vision and robotics applications. There are two version of the board Uno and Industrial with the latter adding 24V digital input and outputs, circuit protections and support for industrial temperature range. EagleEye smart camera key features & specifications: SoM – Raspberry Pi CM3+ with Broadcom BCM2837B0 quad core cortex-A53 processor, 1 GB RAM, and 16GB or 32 GB flash Camera – 5 MP OV5647 image sensor, CS/M12 lens holder + 4mm CS lens Video Output – mini HDMI port Networking – 10/100M Ethernet USB – 1x USB 2.0 host port up to 1.2A Expansion Uno […]

September 12, 2019February 16, 2020 by Jean-Luc Aufranc (CNXSoft) - 14 Comments

Habanero Qualcomm IPQ4019/IPQ4029 SoM Brings 802.11ac Wave2 WiFi to Linux Gateways and Routers

Last April, we first wrote about Qualcomm IPQ4019 quad-core Cortex-A7 processor with built-in 802.11ac Wave 2 WiFi, as it was found in Qualcomm Mesh Networking DevKit with support for Amazon Alexa. A few months later, we discovered router boards powered by either IPQ4019 or IPQ4029 processor such as Dakota DR40X9 or MikroTik RB450Gx4. The latter does not come with WiFi at all and instead leverages the hardware IPSec encryption built-into the processor. Habanero System-on-Module Today, we’ve come across the first IPQ4019 / IPQ4029 system-on-module we’ve countered so far, courtesy of 8devices with their Habanero and Habanero-I 802.11ac Wave 2 modules based on the respective processors. Habanero(-I) specifications: SoC – Qualcomm IPQ4019/IPQ4029 quad-core Arm Cortex-A7 processor @ 717 MHz with NEON, FPU, hardware-based NAT engine, and crypto accelerator System Memory – 512 MB DDR3L RAM Storage – 32MB NOR flash; up to 1 GB NAND flash on baseboard Connectivity QCA8075C 5-port […]

September 11, 2019September 11, 2019 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Congatec conga-SMX8-Mini is a SMARC 2.0 Module based on NXP i.MX 8M Mini Processor

NXP i.MX 8M Mini is the first i.MX processor from the company to be manufactured using a 14nm process, which enabled a higher 2.0 GHz frequency for the Cortex-A53 cores. While it was announced in 2018, the first systems-on-module were launched earlier this with products such as iWave System’ iW-RainboW-G34M-SM, TechNexion Axon Flex modules, F&S Elektronik Systems PicoCore-MX8MM, or CompuLab UCM-iMX8M-Mini among many others. So far, we had no covered any SMARC 2.0 compatible system-on-module based on the new NXP processor, but some companies had already launched such modules including Embedian and Avnet. Congatec has now joined them with the launch of conga-SMX8-Mini SMARC 2.0 system-on-module which builds on the company’s earlier conga-SMX8 i.MX 8 module. conga-SMX8-Mini SoM specifications: SoC (one or the other) NXP i.MX 8M Mini Quad with 4x Arm Cortex-A53 @ 1.8 GHz, 1x Arm Cortex-M4 @ 400MHz, GC NanoUltra 3D GPU, GC328 2D Graphics NXP i.MX […]

August 26, 2019 by Stephen Vicinanza - No Comments

Innocomm Unveils MediaTek i300/i500 SoMs for IoT and AI Applications

SB30 MTK i300 and SB50 MTK i500 AI IoT Platforms Just announced by Innocomm are the SB30 and the SB50 SoMs carrying the MediaTek i300 and i500 SoC’s, and running either Linux or Android. The rundown on the systems is the MediaTek AIoT processor series has been out for some time, and we reported on the latest SoC in the MediaTek i700 article last July. Innocomm is also known for its NXP-based compute modules such as the i.MX8M Mini driven W15 and i.MX8M powered W10. MediaTek i300 Specs The MediaTek i300 (MT8362) SoC is running a Cortex-A35 power-efficient quad-core processor clocking at 1.5 GHz. The SoC is further equipped with an Imagination PowerVR Series8XE GE8300 GPU. The i300 also integrates a PMIC, an RF chip for 2.4 GHz 802.11/b/g/n as well as Bluetooth 4.0. There is support for the MediaTek MT7668 chipset for 802.11ac (WiFi 5). Rounding out the system […]

August 22, 2019August 22, 2019 by Jean-Luc Aufranc (CNXSoft) - No Comments

Compulab CL-SOM-iMX8X SoM & SBC Feature NXP i.MX 8QuadXPlus Quad Core Cortex-A35 Processor

NXP i.MX 8X Cortex-A35 processor designed for automotive infotainment and a variety of industrial applications was officially announced in early 2017 with three parts: i.MX 8QuadXPlus with four Cortex-A35 cores, a Cortex-M4F core, a 4-shader GPU, a multi-format VPU and a HiFi 4 DSP i.MX 8DualXPlus with two Cortex-A35 cores, a Cortex-M4F core, a 4-shader GPU, a multi-format VPU and a HiFi 4 DSP i.MX 8DualX with two Cortex-A35 cores, a Cortex-M4F core, a 2-shader GPU, a multi-format VPU, and a HiFi 4 DSP In 2018, several companies unveiled i.MX 8X systems-on-module including Toradex Colibri iMX8X and Phytech phyCORE-i.MX 8X, and the processor was launched at the end of that year. There’s now another option with Compulab introducing CL-SOM-iMX8X module powered by NXP i.MX 8QuadXPlus processor, as well as SBC-IMX8X single board computer fitted with the module. CL-SOM-iMX8X System-on-Module Key features and specifications: SoC – NXP i.MX 8QuadXPlus quad-core Arm […]