ubuntu News - Page 30 of 168 - CNX Software

November 24, 2022November 28, 2022 by Jean-Luc Aufranc (CNXSoft) - No Comments

Innodisk EXMU-X261 FPGA Machine Vision Platform is based on AMD Xilinx Kria K26 SoM

Innodisk, better known for its embedded storage and memory chips, had announced its intention to turn to the AI market earlier and started with the launch of USB camera modules last month, but the company has gone a step (or two, or three) further with the introduction of the EXMU-X261 FPGA machine vision platform. The EXMU-X261 is powered by an AMD Xilink Kria K26 system-on-module and features HDMI 1.4 video output, Gigabit Ethernet, four USB 3.1 Gen 1 ports for the cameras and other peripherals, as well as two M.2 sockets and a terminal block for expansion. EXMU-X261 specifications: System-on-module – AMD Xilinx Kria K26 FPGA module powered by a Zynq UltraScale+ XCK26 FPGA MPSoC with a quad-core Arm Cortex-A53 processor, up to 250 thousand logic cells, and a H.264/265 video encoder/decoder Storage – MicroSD card socket Video Output – HDMI 1.4 port Networking – Gigabit Ethernet RJ45 port USB […]

November 23, 2022 by Leo Zachary - No Comments

Allwinner T3 automotive-grade processor powers industrial-grade SoM

Allwinner T3 is a quad-core Cortex-A7 automotive-grade processor that supports a wide industrial temperature range of -40°C to +85°C. After comparing the specifications of Allwinner T3, I think it is the same as Allwinner A40i, as Allwinner has different business units and the T-series is for the automotive-grade market, while the A-series has historically been for the tablet market, but is now also used in the industrial-grade market. Tronlong SOM-TLT3 and SOM-TLT3-B are Allwinner T3 system-on-modules (SoM) of Allwinner T3. Both modules have basically the same specifications but the SOM-TLT3 comes with castellated holes for soldering to the carrier board, while the SOM-TLT3-B features board-to-board connectors. Tronlong SOM-TLT3 / SOM-TLT3-B specifications: CPU – Allwinner T3 quad-core Arm Cortex-A7 @ 1.2 GHz with 32KB L1 I-cache + 32KB L1 D-cache, 512KB L2 cache. GPU – Arm Mali-400 MP2 with support for OpenGL ES 1.1/2.0, Open VG 1.1 Memory – 1/2GByte DDR3 […]

November 21, 2022November 21, 2022 by Jean-Luc Aufranc (CNXSoft) - 30 Comments

Radxa E25 modular 2.5GbE router supports WiFi 6 and 4G/5G cellular connectivity

Radxa E25 is a modular router with two 2.5GbE ports based on the Radxa CM3 Industrial (CM3I) system-on-module equipped with a Rockchip RK3568 quad-core Cortex-A55 processor, and optional support for WiFi 6 and 4G or 5G cellular connectivity. I got an early sample of the Radxa E25 carrier board in January, but the company has now refined the design with version 1.4 of the board and will launch the Radxa E25 as a complete router with an enclosure similar to NanoPi R5S and LinkStar H68K we’ve covered previously. Radxa E25 specifications: SoM – Radxa CM3I with Rockchip RK3568 quad-core Cortex-A55 processor @ 2.0 GHz with Arm Mali-G52, up to 8GB RAM, up to 128GB eMMC flash (250MB/s max), optional WiFi and Bluetooth Storage – MicroSD card socket, M.2 SATA 2242 SSD (multiplexed with 4G) Networking 2x 2.5GbE ports via Realtek RTL8125B 2.5 Gbps Ethernet transceiver (Tested by Radxa at 2.2 […]

November 19, 2022January 22, 2024 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

LinkStar H68K – A Rockchip RK3568 “multimedia” router with dual 2.5GbE, dual Gigabit Ethernet, WiFi 6

Linkstar H68K is a Rockchip RK3568 multimedia router with two 2.5GbE ports, two Gigabit Ethernet ports, an optional WiFi 6 and Bluetooth 5.2 module, a few USB ports, and an HDMI 2.1 port supporting up to 4Kp60. Rockchip RK3568 was initially introduced as a solution for NVRs, but I’ve yet to see any, Instead, we’ve gotten some SBCs and mini PCs, as well as several routers such as NanoPi R5S, FastRhino R68s, and the upcoming Radxa E25 that will be announced next week. Linkstar H68K specifications: SoC – Rockchip RK3568 quad-core Cortex-A55 processor @ up to 2.0 GHz with Arm Mali-G52 MP2 GPU, 0.8 TOPS AI accelerator, 4Kp60 H.265/H.264/VP9 video decoder, 1080p60 H.264/H.265 video encoder System Memory – 4GB LPDDR4X Storage 32GB eMMC flash MicroSD card socket Video Output – 1x HDMI 2.1 port up to 4Kp60 Audio – 3.5mm audio jack, digital audio via HDMI Networking 2x 2.5GbE RJ45 […]

November 18, 2022November 18, 2022 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

NVIDIA Jetson Nano based AI camera devkit enables rapid computer vision prototyping

ADLINK “AI Camera Dev Kit” is a pocket-sized NVIDIA Jetson Nano devkit with an 8MP image sensor, industrial digital inputs & outputs, and designed for rapid AI vision prototyping. The kit also features a Gigabit Ethernet port, a USB-C port for power, data, and video output up to 1080p30, a microSD card with Linux (Ubuntu 18.04), and a micro USB port to flash the firmware. As we’ll see further below it also comes with drivers and software to quickly get started with AI-accelerated computer vision applications. AI Camera Dev Kit specifications: System-on-Module – NVIDIA Jetson Nano with CPU – Quad-core Arm Cortex-A57 processor GPU – NVIDIA Maxwell architecture with 128 NVIDIA cores System Memory – 4 GB 64-bit LPDDR4 Storage – 16 GB eMMC Storage – MicroSD card socket ADLINK NEON-series camera module Sony IMX179 color sensor with rolling shutter Resolution – 8MP (3280 x 2464) Frame Rate (fps) – […]

November 16, 2022November 18, 2022 by Jean-Luc Aufranc (CNXSoft) - 11 Comments

GOLE 1 R mini PC offers Rockchip RK3588 CPU, 5.5-inch touchscreen display

HIGOLE introduced the GOLE1 mini PC with a touchscreen display in 2015 mostly to get a free and legal Windows 10 license, but over the years the company launched more Intel models inspired by the original design. However, their latest model, the GOLE 1 R, is based on Rockchip RK3588 octa-core Arm Cortex-A76/A55 SoC instead and running Android 12 by default. The GOLE 1 R is equipped with 8GB RAM, 128GB eMMC flash, a 5.5-inch touchscreen display, Gigabit Ethernet and WiFi connectivity, a microphone, speaker, a gravity sensor, and a 2,500 mAh battery. The company also sells the GOLE 1 RN mini PC without a display, a microphone, a speaker, or a battery for power. GOLE 1 R/RN specifications: SoC – Rockchip RK3588 octa-core processor with four Cortex-A76 cores @ 2.4 GHz, four Cortex-A55 cores @ 1.8 GHz, an Arm Mali-G610 MP4 GPU, a 6TOPS NPU, 8K 10-bit decoder, 8K […]

November 15, 2022 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

Partaker J6412 is a fanless network appliance/mini PC with 3x 2.5GbE, 3x video outputs

Elkhart Lake mini PC 2.5GbE HDMI DisplayPort

We wrote about the low-cost T8-Pro Celeron N5095 mini PC with three HDMI outputs and two Gigabit Ethernet ports last week, but if you’d prefer a model with 2.5GbE networking instead, the Partaker J6412 might be a better, albeit costlier option, with still three displays support (2xDP, 1xHDMI), and three 2.5GbE ports. As its name implies, the fanless mini PC/network appliance is powered by an Intel Celeron J6412 Elkhart Lake processor, coupled with up to 16GB DDR4 memory and a 512GB SSD, and it features six USB ports, plus an RS232 COM port. Partaker J6412 specifications: SoC – Intel Celeron J6412 quad-core Elkhart Lake processor @ 2.0 GHz / 2.6GHz (Burst frequency) with 1.5MB cache, 16 EU Intel UHD Graphics; 10W TDP System Memory – 4GB, 8GB, or 16GB DDR4-3200 via 1x SO-DIMM socket upgradeable up to 32GB Storage M.2 M-Key 2280 SATA socket 1x SATA III (6 Gb/s) port […]

November 13, 2022November 15, 2022 by Jean-Luc Aufranc (CNXSoft) - 765 Comments

Giveaway Week – Mekotronics R58 mini PC

Let’s end Giveaway Week 2022 with a bang, and more exactly a rather powerful Rockchip RK3588 mini PC: Mekotronics R58 (mini). The device comes with 8GB RAM and 64GB flash storage, two 8K capable HDMI 2.0 output ports, one DisplayPort output, one HDMI input, Gigabit Ethernet and WiFI 6 connectivity, as well as a few USB 3.0/2.0 ports, plus support for a SATA drive. I reviewed the Rockchip RK3588 mini PC with Android 12 last July, and I was impressed by the CPU and GPU performance, 4K video playback capabilities, except for AV1 which was not stable at the time, and support for HDMI audio passthrough. Android 12 was quite stable at that early stage as well. Some downsides included the lack of a useful HDMI input app and USB 3.0 performance that could be improved. I always test samples before adding them to the giveaway, and I initially thought […]