ubuntu News - Page 70 of 167 - CNX Software

September 26, 2019February 16, 2020 by Jean-Luc Aufranc (CNXSoft) - No Comments

USB Armory Mk II USB Linux Computer Targets Security Applications (Crowdfunding)

Back in 2014, Inverse Path launched USB Armory computer dongle running headless Linux from a MicroSD card and designed for security applications. The company got bought by F-Secure Foundry in 2017, and the latter has now launched another crowdfunding campaign for an upgraded version USB Armory Mk II keeps a similar USB dongle form factor but replaces the NXP i.MX53 Cortex-A8 processor with a more efficiency NXP i.MX 6ULZ Arm Cortex-A7 processor, the USB type-A port with a modern USB-C port, adds 16GB eMMC flash, Bluetooth 5 LE connectivity, and new security features. USB Armory Mk II specifications: SoC – NXP i.MX6ULZ Arm Cortex-A7 @ 900 MHz System Memory – 512 MB DDR3 RAM Storage – 16 GB eMMC flash + external microSD Connectivity – Bluetooth 5 LE + mesh module (U-blox ANNA-B112) with Arm Cortex-M4 MCU (nRF52832) USB – 2x USB type-C ports: 1x DRP (Dual Role Power) receptacle […]

September 13, 2019September 12, 2019 by Ian W MORRISON (Linuxium) - 3 Comments

CHUWI GBOX Pro Review – Intel Atom x7-E3950 mini PC Tested with Windows 10 & Ubuntu 18.04

CHUWI has released a new mini PC called the GBox Pro. This is a passively cooled mini PC that uses the slightly older Apollo Lake Intel Atom x7-E3950 CPU which is a quad core 4-thread 1.60 GHz processor boosting to 2.00 GHz with Intel’s HD Graphics 505. The GBox Pro is somewhat physically larger than typical recent mini PCs and consists of a 189 x 139 x 39 mm (7.44 x 5.47 x 1.54 inches) rectangular case with a front panel that includes the power button, micro SD slot, a couple of USB 3.0 ports and a Type-C USB port and then on the rear, a headphone jack, two USB 2.0 ports, a Gigabit ethernet port, an HDMI (2.0) port and a VGA interface. The full specifications include: The GBox Pro comes with 64GB of eMMC with pre-installed Windows 10 Home (version 1809 OS build 17763.316) together with 4GB of […]

September 10, 2019 by Jean-Luc Aufranc (CNXSoft) - 12 Comments

$70 NanoPi M4V2 SBC Gets 4GB LPDDR4 RAM, Power & Recovery Buttons

FriendlyELEC NanoPi M4 is a Rockchip RK3399 single board computer that follows Raspberry Pi 3 form factor, and was launched in a year ago for $65 with 2GB RAM, and $95 with 4GB RAM. Raspberry Pi 4 introduction brought some more competition, and helped the prices drop to $50 and $75 respectively. But now the company has launched a revision 2 of the board, NanoPi M4V2 that replaces LPDDR3 memory with faster LPDDR4 memory, adds power & recovery buttons, and the audio jack now also support microphone input. It’s only available with 4GB LPDDR4 memory, and the price is lower at $70. The rest of the specifications are mostly identical: SoC – Rockchip RK3399 big.LITTLE hexa-core processor with 2x Arm Cortex-A72 @ up to 2.0GHz, 4x Cortex-A53 @ up to 1.5GHz, a Mali-T864 GPU with support OpenGL ES1.1/2.0/3.0/3.1, OpenVG1.1, OpenCL, DX11, and AFBC, and a VPU with 4K VP9 and […]

September 8, 2019September 9, 2019 by Siji Sunny - 4 Comments

UpSwift – Manage IoT & Embedded Linux Devices Easily & Quickly

UpSwift offers a GUI based management interface to their customers to update, manage, control & diagnose IoT and embedded devices. The solution also supports OTA updates to any device which is running the Linux operating system including Raspberry Pi board and other Arm SBC’s. Because of the pull-based, client/server architecture, the client-side binary looks for updates in configurable frequent interval and executes the changes and updates. The communication between the client and the server is established over secured REST API’s. By monitoring the applications logs and other device parameters, UpSwift’s Cloud-Smart engine is capable of behaving intelligently by sending email alerts to the administrator. UpSwift Basic WorkFlow Post-registration and package selection with UpSwift Cloud-based dashboard, customers can start adding their devices into UpSwift dashboard. Depending upon the selected plans (number devices connected, features, etc.. will vary depends on the plan chosen), customers will be able to manage their products remotely. […]

September 5, 2019September 7, 2019 by Jean-Luc Aufranc (CNXSoft) - 54 Comments

FriendlyELEC ZeroPi is a Tiny Allwinner H3 SBC with Gigabit Ethernet & USB, an Optional SPI Flash

Several years ago, FriendlyELEC launched NanoPi NEO board with Allwinner H3 quad-core Cortex-A7 processor followed by NanoPi NEO2 upgrading to the Allwinner H5 64-bit Arm Cortex-A53 processor. Both boards target low-cost headless applications with I/O headers, USB and Ethernet, but while the NEO2 comes with Gigabit Ethernet, NEO SBC only features 10/100M Ethernet. The company has now been working on a new family of boards called ZeroPi that’s very similar to NanoPi NEO boards, but they do not come with any I/O headers, and the first ZeroPi board features Allwinner H3 processor, and Gigabit Ethernet. ZeroPi specifications with highlights in bold or stricken-through showing differences against NanoPi NEO: SoC – Allwinner H3 quad-core Cortex A7 @ 1.2 GHz with an Arm Mali-400MP2 GPU System Memory – 256 or 512 MB DDR3 Storage – MicroSD card slot, unmounted SPI flash Connectivity – Gigabit Ethernet via Realtek RTL8211E PHY USB – 1x […]

September 2, 2019April 26, 2020 by Jean-Luc Aufranc (CNXSoft) - 26 Comments

Khadas VIM3 Linux Benchmarks and Comparison to Raspberry Pi 4

I received Khadas VIM3 Amlogic A311D SBC in early July and started testing it with Android running some benchmarks and playing games last month. I was impressed by graphics performance and overall benchmark results in Android, especially the results I got with a heatsink matched Khadas own results with heatsink + fan. So I installed the latest Ubuntu 18.04 available at the time (July 19) in order to repeat benchmarks in Linux and see how it goes. System info in Ubuntu 18.04:

khadas@Khadas:~$ cat /etc/lsb-release 
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=18.04
DISTRIB_CODENAME=bionic
DISTRIB_DESCRIPTION="Ubuntu 18.04.2 LTS"
khadas@Khadas:~$ uname -a
Linux Khadas 4.9.179 #73 SMP PREEMPT Fri Jul 19 09:56:46 CST 2019 aarch64 aarch64 aarch64 GNU/Linux
khadas@Khadas:~$ df -h
Filesystem      Size  Used Avail Use% Mounted on
udev            305M     0  305M   0% /dev
tmpfs           187M  9.5M  177M   6% /run
/dev/rootfs      15G  2.6G   12G  19% /
tmpfs           931M     0  931M   0% /dev/shm
tmpfs           5.0M  4.0K  5.0M   1% /run/lock
tmpfs           931M     0  931M   0% /sys/fs/cgroup
tmpfs           187M   12K  187M   1% /run/user/1000
khadas@Khadas:~$ free -m
              total        used        free      shared  buff/cache   available
Mem:           1861         358        1100          10         402        1479
Swap:           930           0         930

khadas@Khadas:~$ cat /etc/lsb-release

DISTRIB_ID=Ubuntu

DISTRIB_RELEASE=18.04

DISTRIB_CODENAME=bionic

DISTRIB_DESCRIPTION="Ubuntu 18.04.2 LTS"

khadas@Khadas:~$ uname -a

Linux Khadas 4.9.179 #73 SMP PREEMPT Fri Jul 19 09:56:46 CST 2019 aarch64 aarch64 aarch64 GNU/Linux

khadas@Khadas:~$ df -h

Filesystem Size Used Avail Use% Mounted on

udev 305M 0 305M 0% /dev

tmpfs 187M 9.5M 177M 6% /run

/dev/rootfs 15G 2.6G 12G 19% /

tmpfs 931M 0 931M 0% /dev/shm

tmpfs 5.0M 4.0K 5.0M 1% /run/lock

tmpfs 931M 0 931M 0% /sys/fs/cgroup

tmpfs 187M 12K 187M 1% /run/user/1000

khadas@Khadas:~$ free -m

total used free shared buff/cache available

Mem: 1861 358 1100 10 402 1479

Swap: 930 0 930

I decided to install armbianmonitor to draw some nice temperature charts as I did with Raspberry Pi 4:

wget https://github.com/armbian/build/raw/master/packages/bsp/common/usr/bin/armbianmonitor
sudo cp armbianmonitor /usr/bin/
sudo chmod +x /usr/bin/armbianmonitor
sudo apt-key adv --recv-keys --keyserver keyserver.ubuntu.com 2C0D3C0F
sudo wget http://goo.gl/vewCLL -O /etc/apt/sources.list.d/rpimonitor.list
sudo armbianmonitor -r

wget https://github.com/armbian/build/raw/master/packages/bsp/common/usr/bin/armbianmonitor

sudo cp armbianmonitor /usr/bin/

sudo chmod +x /usr/bin/armbianmonitor

sudo apt-key adv --recv-keys --keyserver keyserver.ubuntu.com 2C0D3C0F

sudo wget http://goo.gl/vewCLL -O /etc/apt/sources.list.d/rpimonitor.list

sudo armbianmonitor -r

But I had some error during installation:

sudo armbianmonitor -r
Installing RPi-Monitor. This can take up to 5 minutes. Be patient please/usr/bin/armbianmonitor: line 189: /etc/armbian-release: No such file or directory

Now you're able to enjoy RPi-Monitor at http://192.168.1.8:8888

sudo armbianmonitor -r

Installing RPi-Monitor. This can take up to 5 minutes. Be patient please/usr/bin/armbianmonitor: line 189: /etc/armbian-release: No such file or directory

Now you're able to enjoy RPi-Monitor at http://192.168.1.8:8888

And while I can load the webpage with top menu appearing, it won’t show any data, as its name implies it may only work in Armbian. SBC Bench on Khadas VIM3 Let’s download SBC bench:

wget https://raw.githubusercontent.com/ThomasKaiser/sbc-bench/master/sbc-bench.sh

1	wget https://raw.githubusercontent.com/ThomasKaiser/sbc-bench/master/sbc-bench.sh

Note that I had […]

August 29, 2019 by Jean-Luc Aufranc (CNXSoft) - No Comments

Gateworks GW5913 Compact NXP i.MX 6 SBC Supports PoE, GPS and 4G LTE Cellular Connectivity

Gateworks has announced a new Ventana SBC similar to their GW5530 board with 4G LTE connectivity, as GW5913 single board computer follows the same factor, and supports 4G LTE connectivity via mPCIe cards, but it replaces the microSIM card slot by a nanoSIM card socket, and adds a Gigabit Ethernet port with 802.11at PoE support. Gateworks GW5913 specifications: SoC – NXP i.MX 6Dual dual-core Arm Cortex-A9 processor @ 800MHz System Memory – 512MB DDR3-800 SDRAM Storage – 256MB Flash, serial configuration EEPROM Connectivity Gigabit Ethernet with PoE support Optional 4G LTE via high-power (up to 8W) Gen2 Mini-PCIe socket with USB 2.0 and nanoSIM socket Optional u-blox GPS Receiver with MMCX or U.FL Antenna Connector Expansion Connector – USB, UART, I2C, DAC, DIO Misc – Real-Time Clock with battery backup, voltage and temperature monitor, programmable watchdog timer Power Supply – 8 to 60VDC input voltage range via 2-pin power connector […]

August 27, 2019August 27, 2019 by Jean-Luc Aufranc (CNXSoft) - 14 Comments

Banana Pi BPI-R64 Linux Router Board Launched for $68

SinoVoIP introduced Banana Pi BPI-R64 router board in the summer of 2018. The Linux router board is powered by MediaTek MT7622 dual-core Cortex-A53 WiFi processor with 802.11n WiFi and Bluetooth 5.0 built-in, and offers more connectivity options namely 802.11ac WiFi 5 via MT7615 chip, as well as Gigabit Ethernet ports. 4G LTE is optional via a mini PCIe socket, and a SATA port is included for storage. At the time, I envisioned an official launch in Q1 2019, but I was off by a few quarters, as the company has only just launched Banana Pi BPI-R64 on Aliexpress for $68 plus shipping. The specifications of the Banana Pi BPI-R64 board have slightly changed since last year announcement, and we’ve got a few more details: SoC – MediaTek MT7622 dual-core Arm Cortex-A53 @ 1.35GHz with dedicated network accelerator, 4×4 802.11n and Bluetooth 5 connectivity System Memory – 1GB DDR3 SDRAM Storage […]