wifi News - Page 93 of 102 - CNX Software

November 13, 2014November 23, 2014 by Jean-Luc Aufranc (CNXSoft) - 17 Comments

Linux based BPI D1 HD Camera Module Features Anyka AK3918 ARM9 Processor

SinoVoIP BPI-D1 is a tiny 720p30 camera module running Linux, and powered by Anyka AK3918 ARM9 processor. It’s a standalone module that can be powered by micro USB (5V), or an external Lithium battery, and it also includes various GPIOs, a micro USB interface, a micro SD slot to boot Linux, optional Wi-Fi connectivity, and more.. BPI D1 specifications: Processor – Anyka AK3918 ARM926EJ processor @ 400 MHz System Memory – 64MB DDR2 Storage – 16 MB SPI Flash + micro SD flash up to 32GB. Camera: CMOS Image Sensor 720p @ 30fps, visible light with 940 nm two-way infrared lens filter, with infrared night vision function Lens – M7*P0.35 EFL=3.0mm/F.NO=2.8/View Angle=60° Video Recording – H.264 / AVI hardware encoding at 720p 30fps for up to 120 hours of video data on a 32GB micro SD card Audio Formats – MP3/WMA/AAC Audio Input – Microphone Connectivity – 802.11 b/g/n (AP […]

November 12, 2014November 12, 2014 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

Suptronics X200 Raspberry Pi Model B+ Expansion Board Adds Wi-Fi, RTC, VGA, optical S/PDIF, USB ports, Servo Support, and More

The Raspberry Pi is a nice little board, but in some cases you may want to add some extra ports. Suptronics released the X100 expansion board for Raspberry Pi Model B last year, and they’ve now come up with a little monster called X200 expansion board for Raspberry Pi Model B+ which adds Wi-Fi, a real-time clock + battery, a VGA port, optical S/PDIF output, 3.5 mm mic and audio jack, servo support (ULN2803), and a few USB ports to the low cost board. Key features of X200 expansion board: Input Voltage – 6V to 21Vdc converted to 5V, 3A via step-down DC/DC converter to power the Raspberry Pi. VGA output – HDMI to VGA converter supporting up to UXGA (1600×1200) and 1080p with 10-bit DAC Audio – 3.5mm MIC in jack, 3.5mm stereo audio jack, S/PDIF output, audio I/O connector (Microphone input and stereo audio amplifier 3.3Wx2) Connectivity – […]

November 10, 2014 by Jean-Luc Aufranc (CNXSoft) - 7 Comments

Zome ZMT-330A is Both an Android TV Box and a Wi-Fi Router

A few months ago I wrote about SinoVoip BPI-R1 board powered by Allwinner A20, and being a sort of hybrid media player / router system running Android with 5 Gigabit ports, Wi-Fi, HDMI output and SATA, but now somebody made an actual product which they call an “Android TV Box Wi-Fi Router” sold under the model name ZMT-330A, and based on Nufront NS115 dual core processor. Zome ZMT-330A specifications: SoC – Nufront NS115 dual core Cortex A9 @ 1.0GHz + Mali-400 GPU System Memory – Nufront: 512 MB DDR3 (1GB optional); Wi-Fi module: 32MB SDRAM (64MB optional) Storage – 4GB eMMC Flash (8 /16 GB optional) + micro SD slot; Wi-Fi module: 8MB SPI flash (16MB optional) Video Output – HDMI up to 1080p Video Codecs and Containers – AVI, H.265, VC-1, MPEG-2, MPEG-4, DIVD/DIVX, Real8/9/10, RM, RMVB, PMP, FLV, MP4, M4V, VOB, WMV, 3GP, MKV Connectivity – 2x 10/100M […]

November 9, 2014May 29, 2017 by Jean-Luc Aufranc (CNXSoft) - 68 Comments

Tronsmart Draco AW80 Octa core Android TV Box Review

Tronsmart Draco AW80 (click for full specs) is the first octa core Android TV box / mini PC thanks to Allwinner A80 processor. Draco AW80 Meta model comes with 2GB RAM / 16GB eMMC, and the upcoming Draco AW80 Telos will feature 4GB RAM and a 32GB eMMC. Geekbuying sent me the Meta version for review, and since I’ve already posted pictures of the device and board, today I’ll post my findings after testing the unit. First Boot, Settings and First Impressions I’ve inserted two AAA batteries in the provided remote control, and it works as expect, but as usual, I’ve used Mele F10 Deluxe air mouse to control the device during my testing, since it’s impossible to use most apps with an IR remote control, XBMC/Kodi being one exception. I’ve connected an HDMI cable, a USB 3.0 hard drive to the USB 3.0 OTG port of the TV box, […]

November 5, 2014March 9, 2015 by Jean-Luc Aufranc (CNXSoft) - 11 Comments

Review of Rippl-TV Android XBMC TV Box

Rippl-TV is an Android TV box based on an update revision of Eny Techology/Shenzhen Tomato M8 (square) TV Box with an Amlogic S802 quad core processor, but featuring a different firmware with an alledgedly customized Android 4.4 OS called utilOS, and a launcher based on XBMC also called Rippl-TV. I’ve already written an unboxing post, including pictures of the board, so today I’l focus on the full review, and compare the performance to the original M8, as well as a closer look at the new user interface. First Boot, Settings and First Impressions Rippl-TV comes with an IR remote, and as long as your stay in XBMC and play videos, it’s fine, but as this type of remote is usable with most Android apps, I used Mele F10 Deluxe air mouse instead to control the device. I’ve connected an Ethernet cable, an HDMI cable, a USB hard drive, and a […]

October 31, 2014January 19, 2015 by Jean-Luc Aufranc (CNXSoft) - 10 Comments

Hi-Link HLK-M30 StartKit Based on Mediatek MT7681 WiSoC Sells for $10

Here’s yet again another low cost Wi-Fi board for the internet of things with Hi-Link HLK-M30 StartKit featuring an HLK-M30 Wi-Fi module powered by Mediatek MT7681 SoC, exposing 5 GPIOs, and a serial RS-232 DB9 interface. AFAICR, it’s the second MT7681 board featured on CNX Software after xWiFi. Key feature of HLK-M30 Wi-Fi module and Starter Kit: SoC – Mediatek MT7681 WiSoC Wi-Fi Standards – 802.11b/g/n Wi-Fi encryption: WEP/WPA-TKIP/WPA-AES/WPA2-TKIP/WPA2-AES STA/AP mode Protocols supported by MT7681 – TCP Server/Client, UDP Server/Client, DHCP, DNS, HTTP Internal and external antennas Serial – DB9 connector for RS-232 Expansions 2.54mm through holes for 3.3V/GND, Tx/Rx, and GPIO 1 0 to 4. 4-pin SPI interface to flash firmware to IC (not usable by end users) Misc – Test LEDs Power – 5V power barrel Dimensions – 14.1 x 16.5 x 2.25 mm (Module size). PCB size: Unknown. Documentation including User’s manual and AT command sets, windows […]

October 29, 2014 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Zero+ IoT Wi-Fi Board is Programmable with Lisp (Crowdfunding)

There have been so many low cost Wi-Fi modules and boards with GPIO headers announced this year, especially on crowdfunding sites, and from the hardware point of view, Zero+ (Zero Plus) board looks very much like many other Ralink RT5350 boards such as Vocore or AsiaRF AWM002, but what makes it different is that it can be programmed with Lisp from a web-based IDE. But let’s go through Zero+ board specifications first: SoC – Ralink/Mediatek RT5350 MIPS processor @ 360MHz with dual band 802.11n Wi-Fi with data Rate up to 150Mbps System Memory – 32 MB RAM Storage – 8MB to 16 MB SPI Flash (for firmware) Expansions Headers – 2x headers with access to I2C, SPI, USB, 2x UART, JTAG, and 14x GPIOs USB – 1x USB host port, 1x micro USB for power Misc – 2x buttons Dimensions – 36 x 25mm (possibly module dimensions only, not full board). I’m […]

October 27, 2014 by Jean-Luc Aufranc (CNXSoft) - No Comments

Vsmart V52D EZCast HDMI Dongle Supports Dual Band (2.4 / 5.0GHz) Wi-Fi

EZCast wireless adapters are now pretty common, allow you to display and stream documents, pictures, music, and videos from your smartphone or computer to your big screen TV, and sell for about $20, but the vast majority come with a 2.4 GHz Wi-Fi module, which may be a problem if your environment is crowded with other 2.4GHz routers. Vsmart V52D fixes that, as it includes a dual band Wi-Fi module supporting both 2.4 and 5.0 GHz frequencies. The other part of the specifications remain the same: SoC – Action Semi AM8251 @ 600MHz (MIPS) System memory – 128 MB DDR3 RAM Storage – 128 MB NAND Flash Video output – HDMI 1.3 make Wi-Fi – Dual band 802.11 b/g/n Wi-Fi module Standards – Miracast (EZMirror), Airplay (EZ Air), DLNA, and EZCast Video Containers – MPEG2, MPEG4, AVI, WMV, MKV, MOV, RM, RMVB Audio Formats – MP3, WMA, WAV, OGG, AAC, […]