CNX Software - Embedded Systems News

August 1, 2015August 2, 2015 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Cloudshell for XU4 is a $39 NAS Kit for ODROID-XU4 Board

Hardkernel launched ODROID-XU4 development board a couple of weeks ago. The board is a low cost ($74) update to ODROID-XU3 development board, with an Exynos 5422 octa core processor (4x A15, 4x A7), 2GB RAM, Gigabit Ethernet and USB 3.0, making it a pretty good target for a NAS. It’s easy to connect all requires parts such as hard drive and power supply together, but it would normally be a mess on your desk. So the company create a NAS kit for the board with an enclosure, cables, fans, and even an LCD display with they call Cloudshell for XU4 for sell for $39, so you can get a high relatively high performance NAS for around $113 + shipping, which will vary depending on your distributor, as well as an HDD or SSD drive. Cloudshell kit content: Enclosure with top and bottom covers, rear, front and side panels. Available in […]

August 1, 2015August 1, 2015 by Jean-Luc Aufranc (CNXSoft) - 10 Comments

Zoomtak T8 Plus Android 5.1 TV Box with Amlogic S812 SoC Features a 2.5″ SATA Bay

We’ve already seen a few Amlogic S802 with SATA support such as Zoomtak T8 with a SATA bay, or Eweat EW802 with an external SATA connector. Zoomtak has now introduced an updated version T8 Plus with Amlogic S812 that will run Android 5.1 and Kodi 15.0 by the end of August. Zoomtak T8 Plus specifications: SoC – Amlogic S812 quad core cortex A9r4 @ 2.0 GHz with Mali-450MP6 GPU System Memory – 2 GB DDR3 Storage – 8GB eMMC flash (16GB optional) + SD/MMC card reader + 2.5″ SATA bay Video Output – HDMI supporting 4K30 and 3D, composite output (RCA) Audio Output – HDMI, stereo RCA, and optical S/PDIF Connectivity – 10/100/1000M Ethernet, dual band 802.11 b/g/n Wi-Fi with external antenna, Bluetooth 4.0 (AP6234 module) USB – 3x USB 2.0 host ports Misc – IR receiver, “restore” pinhole, LED display on front panel, and power button. Power Supply – […]

July 31, 2015April 7, 2016 by Jean-Luc Aufranc (CNXSoft) - 10 Comments

Zidoo X1 Android TV Box Unboxing and Teardown

Zidoo X1 is an Android media player powered by Allwinner H3 quad core processor with support for 4K videos up to 30Hz and H.265 / HEVC video codec. The company sent me one unit for review, and today I’ll start by unboxing and tearing down the device, before further testing to get the review posted in a few days. Zidoo X1 Unboxing I’ve received the package by (MY)DHL a few days after it was shipped. The package shows some of the main features like 4K and 3D support, H.265/HEVC codec, Kodi support, and ZIUI which must be the name given to Zidoo user interface. The box comes with an HDMI cable, a user’s manual in English, a warranty card, a 5V/2A power adapter, and a standard IR remote control with IR learning function for 5 keys: Vol +/-, power, AV/TV, and SET so that you can control your TV with […]

July 31, 2015 by Jean-Luc Aufranc (CNXSoft) - No Comments

Leadcore Roadmap Until 2017 Shows 14nm FinFET Processors Planned

I first heard about Leadcore in 2013 when they announced several ARM Cortex A7 and A9 mobile processors, but since then they’ve become a bit more popular after Leadcore L1860C quad core processor found its way into in Xiaomi Redmi 2A smartphone. The company has now shown its roadmap for 2016, and 2017 with some interesting developments. We can expect three processors in 2016 all with 64-bit ARM cores manufactured using 28nm process: An 8-core 64-bit processor with Mali-T820 GPU and LTE Cat 6 modem A 4-core 64-bit processor with an unnamed Mali GPU and LTE Cat 6 modem A quad core Cortex A53 processor with TD-LTE and LTE FDD And in 2017, one processor is scheduled, should be manufactured using 14nm FinFET process, which could mean 2017 will be the year 14nm FinFET goes mainstream even for lower cost processors. That currently unnamed processor will feature eight 64-bit cores […]

July 31, 2015August 3, 2015 by Jean-Luc Aufranc (CNXSoft) - 8 Comments

Freaks3D is a Low Cost Portable 3D Printer (Crowdfunding)

ElecFreaks is a design house based in Shenzhen that caters to makers and startups, and started selling Arduino shields and accessories, as well as Raspberry Pi add-on boards, before moving to robotics kits, 3D printers, and other tools in demand by electronics hobbyists. The company has now designed Freaks3D portable 3D printer, and launched an Indiegogo campaign to fund production. Freaks3D printer specifications: Technology – Fused Deposition Modeling Build Volume – 130 x 150 x 100 mm (LxWxH) Nozzle Size – Standard 400 microns Resolution – Layer: 100 microns; XY: 50 microns Filament diameter – 1.75mm Filament Material – PLA or TPU 3D Files Transfer – USB via PC, or SD card Misc – LCD Display, one button operation, printing bed does not require heating Power Supply – 12V / 8A power adapter, or 12V / 5A power bank (Not included) Dimensions – 290 x 320 x 325 mm Weight […]

July 31, 2015 by Jean-Luc Aufranc (CNXSoft) - 11 Comments

Next Thing Has Released Software and Hardware Files for the $9 CHIP Computer

Next Thing CHIP computer powered by Allwinner R8 module, also referred as “the $9 computer“, had a very successful crowdfunding campaign having raised over $2,000,000 from nearly 40,000 backers. When launching an electronics products on a crowdfunding campaign, many companies claim their device will be open source, only to disappoint once the perks actually ship, and Next Thing made the same promise, except they appear to have delivered as shown in their latest update “Holy C.H.I.P! It’s C.H.I.P!!!” showing the first production samples, and providing links to hardware design files for the Alpha version, as well as buildroot, U-boot and Linux source code. All resources can be found on docs.nexthing.co, but let’s check what they’ve released so far. Hardware design files on Github include: A Bill of Materials (BoM) Schematics in PDF and DSN formats PCB Layout in BRD and PNG format Pinouts for U12 and U14 connectors Mechanical files […]

July 31, 2015July 31, 2015 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

STMicro Introduces $5 CLOUD-ST25TA NFC Evaluation Board

STMicro has just announced a new low cost NFC evaluation board called CLOUD-ST25TA used to evaluate their ST25TA02K NFC Forum Type 4 tag chip part of their ST25TA series, previously known as SRTAG. CLOUD-ST25TA board specifications: SoC – ST25TA02K-P NFC/RFID Tag in UFDFPN5 ECOPACK 2 package Contactless interface NFC Forum Type 4 Tag ISO/IEC 14443 Type A 106 kbps data rate Internal 50 pF tuning capacitance allowing small inductive antenna design Memory 256 Byte (2 Kbit) EEPROM with NDEF data support 200 years data retention 1 million erase-write cycles endurance 128 bit password data protection 20 bit event counter for read or write access with anti-tearing feature Digital pad Configurable general purpose output (GPO) indicating, for example, RF field detection The board features look somewhat similar to NFC tags sold for 50 cents online, but it does come with more memory (256 bytes vs 144 bytes), has a longer claimed […]

July 31, 2015 by Jean-Luc Aufranc (CNXSoft) - No Comments

Linaro 15.07 Release with Linux 4.2 and Android 5.1

Linaro 15.07 has been released with Linux 4.2-rc3 (Baseline), Linux 3.10.83, 3.14.45 and 3.18.17 (LSK), and Android 5.1.1_r8. The Linux kernel got various bug fixes, and a power reduction technique has been implemented for Qualcomm processor. Progress has been made to boot Android with UEFI on Hikey board, and work is still on-going on 96boards including Hisilicon Hikey, Qualcomm DragonBoard 410c, and an upcoming and yet-to-be-formally-announced Marvell PXA1928 board called Helium. Highlights of this release: Linux Linaro 4.2-rc3-2015.07 linaro-android topic updated to 4.2-rc3 and recent AOSP/android-3.18 included GATOR version 5.21.1 llct-misc-fixes topic: “HACK: of: Limit FDT size for CRC check on arm64” has been dropped. FVP model was the last target to require this hack, but the new FVP firmware doesn’t need it anymore updated integration-linaro-vexpress64 topic by ARM LT: Versatile Express TC2 support is back, HDLCD display now works on TC2, the topic will be renamed to integration-linaro-vexpress next […]