Posted on by Jean-Luc Aufranc (CNXSoft) - 4 Comments on Samsung UFS 4.0 storage to offer up to 4,200 MB/s read speeds, 1TB capacity

Samsung UFS 4.0 storage to offer up to 4,200 MB/s read speeds, 1TB capacity

Samsung UFS 4.0

Samsung Electronics has unveiled its first Universal Flash Storage (UFS) 4.0 solution based on the company’s 7th-generation V-NAND and a proprietary controller allowing speeds of up to 23.2 gigabits per second (Gbps) per lane or double the previous UFS 3.1 solutions. In more practical terms, Samsung UFS 4.0 storage will deliver a sequential read speed of up to 4,200 MB/s and a sequential write speed of 2,800 MB/s, corresponding to about 2x and 1.6x faster speeds over UFS 3.1 storage. Samsung also claims that power efficiency has been enhanced with a sequential read speed of up to 6.0 MB/s per milliampere (mA), or about a 46-percent improvement over UFS 3.1. An advanced Replay Protected Memory Block (RPMB) is integrated into the chip to store important personal data that can only be read or written through authenticated access, and whose design is said to be 1.8 times more efficient. Samsung UFS […]

Posted on by Jean-Luc Aufranc (CNXSoft) - No Comments on Axiomtek AIE900-XNX – A 5G connected fanless Edge AI system for AMR, AGV, and computer vision

Axiomtek AIE900-XNX – A 5G connected fanless Edge AI system for AMR, AGV, and computer vision

Axiomtek AIE900-XNX

Axiomtek AIE900-XNX is a fanless Edge AI computing system powered by NVIDIA Jetson Xavier NX system-on-module designed for autonomous mobile robots (AMR), automated guided vehicles (AGV), and other computer vision applications. The system delivers up to 21 TOPS thanks to the 6-core NVIDIA Carmel ARM v8.2 (64-bit) processor, NVDLA accelerators, and 384-core NVIDIA Volta architecture GPU found in the Jetson Xavier NX module. The AIE900-XNX Edge AI computer also comes with a 5G module for high-speed cellular connectivity and supports SerDes, PoE, and MIPI CSI cameras for video processing. Axiomtek AIE900-XNX specifications: NVIDIA Jetson Xavier NX system-on-module with CPU – 6-core NVIDIA Carmel Armv8.2 64-bit CPU with 6 MB L2 + 4 MB L3 cache GPU – 384-core NVIDIA Volta GPU with 48 Tensor Cores AI Accelerator – 2x NVDLA System Memory – 8GB 128-bit LPDDR4x onboard Storage – 16GB eMMC flash Storage –  M.2 Key M 2280 with PCIe […]

ArmSoM RK3588 AIModule7 NVIDIA Jetson Nano-compatible SOM
Posted on by Jean-Luc Aufranc (CNXSoft) - No Comments on NVISEN FU01 is a fanless Tiger Lake mini PC with a Thunderbolt 4 port

NVISEN FU01 is a fanless Tiger Lake mini PC with a Thunderbolt 4 port

Tiger Lake Thunderbolt 4

NVISEN FU01 fanless mini PC is offered with a choice of Intel Core i3/i5/i7 Tiger Lake processors, fitted with up to 16GB RAM (upgradeable to 64GB), a 256GB or 512GB M.2 NVMe SSD, and the highlight of the computer is its 40Gbps Thunderbolt 4 port with 8K video output support. The Tiger Lake system can drive up to three 4K displays with HDMI 2.0 and DisplayPort connectors adding to the Thunderbolt 4 port, offers Gigabit Ethernet and WiFi 5 connectivity, plus six USB 3.0/2.0 Type-A ports for expansion. NVISEN FU01 specifications: SoC (one or the other) Intel Core i3-1115G4 dual-core processor @ 3.0GHz, up to 4.1GHz (Turbo) with Intel UHD graphics; 28W TDP Intel Core i5-1135G7 quad-core processor @ 2.4GHz, up to 4.2GHz (Turbo) with Intel Xe graphics; 28W TDP Intel Core i7-1165G7 quad-core processor @ 2.8GHz, up to 4.7GHz (Turbo) with Intel Xe graphics; 28W TDP System Memory & […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 5 Comments on SONOFF Zigbee Bridge Pro gateway supports up to 128 sub-devices

SONOFF Zigbee Bridge Pro gateway supports up to 128 sub-devices

SONOFF Zigbee Bridge Pro

ITEAD has just introduced the SONOFF Zigbee Bridge Pro WiFi <-> Zigbee gateway as an upgrade to the Sonoff ZBBridge gateway launched in 2020. Both devices look exactly the same, and the changes are under the hood with the EFR32MG21 and ESP8266/ESP8285 combo being replaced by Texas Instruments SimpleLink CC2652P and ESP32 chips to boost the number of supported sub-devices from 32 to 128. Other changes include the addition of a buzzer acting as an alarm or doorbell chime, as well as a “built-in high-precision local RTC” for gateway time synchronization of local scene schedules. SONFF Zigbee Bridge Pro (aka ZB Bridge-P) specifications: Wireless MCUs Texas Instruments CC2652P SimpleLink Arm Cortex-M4F multiprotocol 2.4 GHz wireless MCU with integrated power amplifier Espressif Systems ESP32-DOWN-V3 dual-core processor with WiFi 4 and Bluetooth LE Wireless Connectivity – 2.4 GHz 802.11b/g/n WiFi 4 and Zigbee 3.0 Supports for up to 128 sub-devices Support for […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 13 Comments on LilyGO T-PicoC3 board merges RP2040 & ESP32-C3, integrates color display

LilyGO T-PicoC3 board merges RP2040 & ESP32-C3, integrates color display

LilyGO T-PicoC3

LilyGO T-PicoC3 is a small development board combining Raspberry Pi RP2040 dual-core microcontroller with ESP32-C3 RISC-V MCU to add WiFi and Bluetooth LE connectivity and adds a 1.14-inch color display to the mix, plus several I/Os. We had previously other designs merging ESP32 and RP2040 with UDOO KEY, Arduino Nano RP2040 Connect, or the Pico Wireless Pack among others, but as far as I know, the T-PicoC3 board is the first to use Raspberry Pi RP2040 and ESP32-C3 RISC-V processor. LilyGO T-Pico3 specifications: Microcontrollers Raspberry Pi RP2040 dual-core Cortex-M0+ MCU with 264 KB of embedded SRAM Espressif Systems ESP32-C3 RISC-V processor with WiFi 4 and Bluetooth 5.0 LE connectivity Storage – 4MB SPI flash connected to RP2040 Display – 1.14-inch full-color IPS LCD Display (ST7789V SPI controller) with 240 x 135 resolution USB – USB Type-C port for power and programming (RP2040 / ESP32-C3) Expansion – 15-pin + 12-pin expansion […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 17 Comments on Android RISC-V progress update, emulator support, and roadmap to 2023

Android RISC-V progress update, emulator support, and roadmap to 2023

Android 12 RISC-V

We’ve first covered Alibaba T-Head work on Android 10 for RISC-V in January 2021, and later that year they started selling the T-Head RVB-ICE dual-core RISC-V board with GPU for software development. The company has now provided an update for Android 12 RISC-V port, instructions to build Android RISC-V to run it in an emulator,  as well as a 2022-2023 roadmap. Alibaba T-head is working on hardware platforms, which appears to be similar to T-Head RVB-ICE board, with the following minimal specifications: CPU – At least Dual-core XuanTie C910 (rv64imafdcv) processor GPU – Compatible with OpenGL ES and OpenCL VPU – HW Video/Picture codec Neural Network Accelerator System Memory – 4GB or more DDR Memory Display – MIPI/HDMI Audio – Multi-Channel Audio output & input Camera – ISP with support for multiple MIPI CSI lanes USB interface(s) They built upon the work done on Android 10 to add support for […]

Rockchip RK3568, RK3588 and Intel x86 SBCs and SoMs in 2025
Posted on by Jean-Luc Aufranc (CNXSoft) - 5 Comments on Rockchip RK3566 Ubuntu 20.04 mini PC offers HDMI and VGA video outputs

Rockchip RK3566 Ubuntu 20.04 mini PC offers HDMI and VGA video outputs

Rockchip RK3566 Ubuntu 20.04 mini PC

Another day, another Rockchip RK3566-based device with an unnamed mini PC / thin client running Ubuntu 20.04, equipped with 2 to 4GB RAM, 16GB to 32GB eMMC flash, HDMI and VGA video outputs, Gigabit Ethernet, an optional wireless module, and more… Specifications: SoC – Rockchip RK3566 quad-core Cortex-A55 processor @ 1.8 GHz with Arm Mali-G52 EE GPU, 0.8 TOPS NPU/AI accelerator System Memory – 2GB to 4GB DDR3 Storage – 16GB or 32GB eMMC flash Video Output HDMI up to 1920×1080 (Odd as RK3566 supports 3840×2160 natively, so probably an error) VGA up to 1920×1080 Audio – 3.5mm audio output jack, 3.5mm microphone jack Networking – Gigabit Ethernet RJ45 port USB – 4x USB 2.0 ports, 1x USB 3.0 port Misc – Power button, support for auto power on Power Supply – 12V/1A via DC power barrel jack Dimensions – 105 x 105 x 25mm If the screenshot above is […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 10 Comments on Ultenic T10 review – A self-emptying 2-in-1 smart vacuum robot with mopping function

Ultenic T10 review – A self-emptying 2-in-1 smart vacuum robot with mopping function

Ultenic T10 smart vacuum cleaner review

Ultenic T10 is a 2-in-1 smart vacuum cleaner and mopping system with a self-emptying base that’s quite similar to the Cybovac S31 robot I reviewed a little over a year ago. The Cybovac vacuum cleaner still works fine, but it has some shortcomings, so when Ultenic asked me whether I would be interested in reviewing their T10 unit, I accepted, and here I am with a new smart robot vacuum cleaner that I’ll review with the Android app in a larger house. Ultenic T10 unboxing The package and hardware are very similar to what I got with the Cybovac model. The robot comes with a charging base that’s pretty large since it includes its own dust bag for the self-emptying function. Key features listed for the T10 vacuum cleaner: Navigation Type – LDS laser for visual SLAM function Suction power Carpet pressurization – 2700 Pa Fixed-point cleaning – 2700 Pa […]

Boardcon CM3588 Rockchip RK3588 System-on-Module designed for AI and IoT applications