CNX Software - Embedded Systems News

September 10, 2019September 10, 2019 by Jean-Luc Aufranc (CNXSoft) - 10 Comments

Up2Stream Pro HiFi Audio Receiver Board Streams Audio over WiFi, Bluetooth, Ethernet, or USB

Last December, we wrote about Up2Stream WiFi audio module designed for people wanting to build their own DIY wireless speakers. The module is based on MediaTek MT7688AN MIPS processor with 64MB DDR2 and 16MB flash storage The module also comes with a small baseboard allowing for an easier connection to speakers. The company has now introduced Up2Stream Pro model based on the same module, but with a baseboard adding more features including Bluetooth, Ethernet, USB, and audio jacks. Up2Stream Pro key features and specifications: Audio Output – 3.5mm AUX jack and I2S header Input – 3.5mm AUX-in SNR: 91db THD: 0.03% Sample rate – 24bit up to 192kHz FLAC, Wav, and APE codec supported, but NOT SBC, APT-X, APT-X HD, or LDAC. Multiroom & Multizone support EQ control Connectivity – Ethernet, WiFi, and Bluetooth 5.0 Streaming Protocols – Airplay, DLNA, UPnP, Spotify Connect Compatible Services – Spotify, Deezer, Tidal, Qobuz, […]

September 10, 2019 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

Intel NUC 8 Rugged Fanless NUC is Powered by an Intel Celeron N3350 Processor

Most Intel NUCs are cooled with a fan, and so far if you wanted a fanless NUC you had to purchase a third party enclosure. But Intel has been working on a new model named either “Chaco Canyon” NUC or Intel NUC 8 Rugged that’s both fanless and rugged. The fanless NUC is powered by a dual-core Intel Celeron N3350 Apolo Lake processor coupled with 4GB of RAM and a 64GB eMMC flash both of which are soldered to the board. You can add to storage thanks to an M.2 2280 slot with support for NVMe or SATA SSD’s. Intel NUC 8 Rugged specifications: SoC – Intel Celeron N3350 dual-core processor clocked at 1.1 GHz / 2.4 GHz with Intel HD Graphics 500; 6W TDP System Memory – Dual-channel 4GB RAM soldered-down Storage – 64GB eMMC flash soldered-down, M.2 2280 key M slot for PCIe x4 NVME or SATA SSD […]

ArmSoM RK3588 AIModule7 NVIDIA Jetson Nano-compatible SOM

September 9, 2019 by Ayo Ayibiowu - 3 Comments

Daytripper Uses Laser Time-of-Flight Sensor to Hide Your Slacking Off From Your Boss

Have you ever run into that awkward situation where you were actively busy doing something totally off company’s duties on the computer and got caught red-handed, or an unknown intruder ventured into your privacy, and you got in this awkward unexplained situation. If yes, then you are not alone. Work could be boring sometimes, and some of us do like to take some steam off probably by playing some video games, watch funny videos, or do something outside the blues. It is nice until a superior or a colleague catches us doing that. One way to avoid this is by closely observing our surrounding while getting ourselves immersed but doesn’t always work well because it is super easy to slack off. Well, you don’t have to worry anymore thanks to an innovative project designed by dekuNukem called Daytripper. Daytripper is a laser tripwire that will help you automatically hide your […]

September 9, 2019 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

Rikomagic R6 Mini Android Projector Looks Like a Vintage Radio

Rikomagic has been releasing Android TV boxes at least since 2012, but in recent years the company has also started to work on Android projectors, and a couple of years ago I reviewed Rikomagic RKM R1 mini projector, and I was fairly satisfied despite the system using an entry-level quad-core Cortex-A7 processor (Rockchip RK3128). Based on the same industrial design, Rikomagic R5 projector launched in 2018 is more up-to-date to today’s user’s requirements with Rockchip RK3328 and 2GB RAM. But with Rikomagic R6 mini Android projector, the company is trying something different, at least in terms of appearance, as the projector looks like a vintage radio. Rikomagic R6 specifications: SoC – Rockchip quad-core processor System memory – 1 or 2GB DDR3 Storage – 8 or 16GB eMMC flash, microSD slot Projector 4000 lumens (real 70 ANSI lumens) Resolution – 720p physical lense; up to 1920×1080 output Contrast ratio – 2000:1 […]

September 9, 2019September 9, 2019 by Jean-Luc Aufranc (CNXSoft) - 13 Comments

NanoPi M4 SBC Metal Case Comes with an NVMe SSD Adapter and Cooling Fan

There are several single board computers that come with NVMe SSD either directly like on ODROID-H2 SBC or indirectly via an expansion board such as M2X extender board for Khadas VIM3. But if you’d like an enclosure for your system it either further adds to the cost, or you need to develop the case yourself. If you’d like an SBC that takes an NVMe SSD in a fairly compact enclosure and at a affordable price (under $100 excluding the SSD), NanoPi M4 metal case kit looks to be a good option and sells for $28 with SSD adapter and fan, or just $26 if you already own the SSD adapter. As a reminder, NanoPi M4 is a Rockchip RK3399 SBC that mostly follows Raspberry Pi form factor comes with 2GB or 4GB RAM with price starting at $50. See NanoPi M4 specifications for more details. One selling point of this […]

September 8, 2019September 9, 2019 by Siji Sunny - 4 Comments

UpSwift – Manage IoT & Embedded Linux Devices Easily & Quickly

UpSwift offers a GUI based management interface to their customers to update, manage, control & diagnose IoT and embedded devices. The solution also supports OTA updates to any device which is running the Linux operating system including Raspberry Pi board and other Arm SBC’s. Because of the pull-based, client/server architecture, the client-side binary looks for updates in configurable frequent interval and executes the changes and updates. The communication between the client and the server is established over secured REST API’s. By monitoring the applications logs and other device parameters, UpSwift’s Cloud-Smart engine is capable of behaving intelligently by sending email alerts to the administrator. UpSwift Basic WorkFlow Post-registration and package selection with UpSwift Cloud-based dashboard, customers can start adding their devices into UpSwift dashboard. Depending upon the selected plans (number devices connected, features, etc.. will vary depends on the plan chosen), customers will be able to manage their products remotely. […]

Rockchip RK3568, RK3588 and Intel x86 SBCs and SoMs in 2025

September 7, 2019September 8, 2019 by Stephen Vicinanza - 8 Comments

PIS2 DIY Handheld PS2 Game Console Uses Raspberry Pi 2 SBC as SMB Server

It’s a Handheld PS2 Game Console The PIS2 is a handheld PS2 game console that has the chopped-up insides of PS2 game system stuffed into a small console, along with a display, controllers and a Raspberry Pi 2 to access the games from the Ethernet to load directly to the hardware. Sony has officially discontinued all handheld PSs as of March 2019, so these DIY consoles are popping up regularly. This one is quite an accomplishment. It Took a Long Time The creator of the PIS2, a hacker named Darkwing, started work on the unit in 2013. He stopped for some time, then started documenting his work on the system in 2017. The ambitious first design specs looked like this PS2 scph-79002 5.6″ Dalian Good Display and VGA chip Genius MaxFire Blaze 2 controller 11.1V 6200mAh made of 6 ncr18650a cells Texas instrument ptn78020 switching regulator IBM Lenovo 05K5494 Laptop […]

September 6, 2019 by Jean-Luc Aufranc (CNXSoft) - 10 Comments

NXP i.MX RT106F & RT106A/L Cortex-M7 Processors Target Offline Face Recognition & Smart Audio Applications

NXP i.MX RT crossover processors combine real-time capabilities of microcontrollers with the performance of application processors thanks to an Arm Cortex-M7 core clocked at 528 MHz and more. The performance is indeed impressive as shown by Teensy 4.0 benchmarks, but so far NXP i.MX RT processor targeted general purpose applications. The company has now introduced three new crossover processors designed for AI applications. NXP i.MX RT106F is designed for offline face recognition and expression Identification, while RT106L and RT106A are made for local and cloud-based embedded voice applications. NXP i.MX RT106F Processor Highlights of the processor: CPU – Arm Cortex-M7 @ 600 MHz (3020 CoreMark/1284 DMIPS) Memory – 1 MB On-Chip SRAM plus up to 512 KB configurable as Tightly Coupled Memory (TCM) External memory interface options – NAND, eMMC, QuadSPI NOR Flash, and Parallel NOR Flash Real-time, low-latency response as low as 20 ns Industry’s lowest dynamic power with […]

Boardcon CM3588 Rockchip RK3588 System-on-Module designed for AI and IoT applications