CNX Software - Embedded Systems News

January 23, 2017April 27, 2017 by Jean-Luc Aufranc (CNXSoft) - 14 Comments

CHUWI LapBook 14.1 Apollo Lake Laptop Review – Part 1: Unboxing & (Partial) Teardown

CHUWI LapBook 14.1 is one the first Intel Apollo Lake laptop launched in the market. It features an Intel Celeron N3450 quad core processor coupled with 4GB RAM and 64GB storage, and comes with a 14.1″ Full HD IPS Display. The company sent me a sample for review, and I’ll start by checking out the hardware today, before running some tests in Windows 10, and trying to install Ubuntu 16.04 later on. CHUWI LapBook 14.1 Unboxing I received the device in what looks like CHUWI standard package for 14″ laptops, but a sticker on the stop made it clear which model I got.The laptop comes with a 12V/2A power supply and power cord, a user manual in English and Chinese, a warranty card, and a product inspection report. The laptop battery is nearly fully charged, so I started it. I could not find any keys to adjust the display brightness, […]

January 23, 2017 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Linux.conf.au Linux Conference Australia Videos Uploaded to YouTube

Linux.conf.au is a Linux conference that takes place yearly in Australia or New Zealand. This year, the event took place on January 16-20 in Hobart in Tasmania, and the schedule was divided into 6 categories/rooms: Sysadmin, WOOTConf, Open Knowledge, Kernel, Games and FOSS, and Open Radio. There was not that many talks related to embedded or dev boards, but some notable sessions included “Building Escape Room Horror Experiences with Arduino and C++“, “Decoding Satellites with SatNOGS“, or “My adventures building hamlib support for the OpenSDR board” among others. The organizers have now uploaded videos of the talks in Youtube with one session embedded below. Via Phoronix

ArmSoM RK3588 AIModule7 NVIDIA Jetson Nano-compatible SOM

January 23, 2017January 23, 2017 by Jean-Luc Aufranc (CNXSoft) - No Comments

GOLE360 360 Degrees Video Camera Works with Android Smartphones and in Standalone Mode

GOLE is better known for their mini PC tablet combos like GOLE1 and GOLE1 Plus, but the company is about to launch GOLE360 360 Degree Panorama VR Action Camera looking very similar to Insta360 Nano camera, but instead of being designed for iPhones, they made is for Android smartphones with either a micro USB port, or a USB type C port. GOLE360 camera specifications: SoC – InfoTM C23 32-bit processor @ up to 600MHz with 128MB RAM on-chip Storage – micro SD slot up to 128GB Camera 4 MP sensor Camera lens: aperture F2.4, focuses: Efl 0.94, angle: 210o Video – H.264/MOV up to 1920×960@30fps /1472×736@30fps Photo – JPEG @ 3008×1504 /1920×960 USB – 1x micro USB 2.0 port, or 1x USB 2.0 type C port depending on model Battery – 3.7V/800mAh Dimensions – 11.68 x 3.7 x 2.2cm The camera runs Linux 3.10. This is not the first 360 […]

January 22, 2017January 22, 2017 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

Inforce 6309L Board is Powered by Qualcomm Snapdragon 410E Processor with 10-year Availability

Inforce Computing launched 6309 micro single board computer powered by Snapdragon 410 processor, and compatible with 96Boards Dragon 410c board, a little over a year ago. The company has sent a newsletter promoting the launch of cost-down version with long term support equipped with Snapdragon 410E processor, and named Inforce 6309L. Comparison table between Inforce 6309L board and DragonBoard 410C provided by the company: Inforce 6309L Dragonboard 410C SoC Qualcomm Snapdragon 410E quad core ARM Cortex A53 processor with Adreno 306 GPU Dimensions 54mm x 85mm Memory Storage 1GB LPDDR3 8GB eMMC Micro SD Connectivity Wi-Fi/BT/GPS Video 1080p HD video 720p HEVC playback Camera Dual cameras 13MP on MIPI-CSI Interfaces Micro USB, USB, Micro HDMI, MIPI-CSI, expansion header Micro USB, USB, HDMI, expansion header Operating System Android Lollipop 5.1 Linux (Debian) Win10 IoT core Both boards are pretty similar, except Inforce 6901L replaced the HDMI port with a mico HDMI […]

January 21, 2017January 21, 2017 by Jean-Luc Aufranc (CNXSoft) - 13 Comments

How to use Sonoff POW with ESPurna Firmware and Domoticz Home Automation System

Sonoff POW is an ESP8266 based wireless switch with a power meter that comes pre-loaded with a closed-source firmware that works with eWelink app for Android or iOS by default. But we’ve also seen Sonoff POW, and other Sonoff wireless switches from the same family, can be flash with open source firmware supporting MQTT (Message Queuing Telemetry Transport) lightweight messaging protocol such as ESPurna, and I initially sent data from Sonoff POW to ThingSpeak via an MQTT broker (mosquitto) to draw some pretty charts. I did that with the switch connected to a lightbulb, but I’ve since installed Sonoff POW in my office to measure the room’s power consumption minus the ceiling light and aircon as shown below. Sonoff cable mechanism is really a pain for hard copper wires, as they are hard to push inside the mechanism, and something come out. I finally managed by it took longer than […]

January 20, 2017March 27, 2017 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

RTL8710 Ameba Arduino Development Board and Ameba Arduino v2.0.0 SDK Released

We’ve already seen a NodeMCU lookalike board called RTLDuino based on Realtek RTL8710AF ARM Cortex M3 WiSoC earlier this month, that can be programmed with a community supported Arduino port also called rtlduino via a JLink SWD debugger, but now Realtek has just launched Ameba RTL8710 Arduino board, and released Ameba Arduino v2.0.0 SDK which brings official Arduino support to RTL8710AF platforms. There appears to be two versions of the development kit: RTLDUINO_PRO_V1.0 and REALTEK-AMEBA_RTL8710_V2.0, but based on the user manual they seem to be identical, and as you can see from the above picture, it includes a baseboard and the aforementioned RTLDuino board. RTL8710 Ameba Arduino HDK key features: SoC – Realtek RTL8710AF ARM Cortex-M3 MCU @ 83 MHz with 802.11 b/g/n WiFi, hardware SSL engine connected to the baseboard via: RTLDuino board through female header B&T RTL-00 module soldered on module footprint USB – 2x micro USB ports, […]

Rockchip RK3568, RK3588 and Intel x86 SBCs and SoMs in 2025

January 20, 2017January 20, 2017 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

$30 BakeBit Starter Kit Adds Sensors & Buttons to Your NanoPi NEO & NEO Air Boards

FriendlyElec (previously FriendlyARM) launched NanoPi NEO and then NanoPi NEO Air board as respectively Ethernet and WiFi/Bluetooth connected boards for IoT applications. But so far, there was no ecosystem around the board, you had to use your own sensor modules, and write your own software to control them. This has now changed with the launch a BakeBit Starter Kit with twelve sensor modules, a NanoHat Hub add-on board designed for NanoPi boards, as well as BakeBit Library to control the hardware. The NanoHat Hub plugs into the two NanoPi NEO headers and provide 12 headers with 3x I2C interfaces, 3x analog interfaces, 2x UART interfaces, and 4x digital interfaces among which D3 and D5 support PWM, compatible with SeeedStudio Grove modules. You then have a choice of 12 modules to connect to the NanoHat Hub: OLED Module Ultrasonic Module Green LED Module Red LED Module LED Bar Module Rotary Angle […]

January 20, 2017 by Jean-Luc Aufranc (CNXSoft) - No Comments

e-con Systems Launches e-CAM130_CUTX1 Ultra HD Camera for Nvidia Jetson TX1 Development Board

e-con Systems, an embedded camera solution company, has just announced the launch of e-CAM130_CUTX1 MIPI camera board for NVIDIA Jetson Tegra X1 development kit. The 13MP camera is based on On Semiconductor AR1820 CMOS image sensor, connects to TX1 board via its 4-lane MIPI CSI-2 connector, and supporting up to 3840 x 2160 @ 30fps/ 13MP@ 20 fps video streaming in uncompressed YUV format. e-CAM130_CUTX1 4K camera board features & specifications: Sensor – 1/2.3″ Optical form factor AR1820HS sensor with on-board high performance ISP. Focus Type – Fixed focus Resolution: – 13MP on e-CAM130_CUTX1 (The sensor is capable of 18MP) Pixel size – 1.25μm pixel with Aptina / ON Semiconductor A-PixHS with BSI technology and advanced pixel architecture Sensor Active Area – 4912(H) x 3684(V) Responsivity – 0.62 V/lux-sec (545nm); SNR: 36.3 dB; Dynamic Range: 65.8 dB Output Format – Uncompressed YUV422 format and compressed MJPEG format. YUV422 resolutions: VGA @ […]

Boardcon CM3588 Rockchip RK3588 System-on-Module designed for AI and IoT applications