CNX Software - Embedded Systems News

October 9, 2015October 24, 2015 by Jean-Luc Aufranc (CNXSoft) - 35 Comments

Zidoo X6 Pro Android TV Box Review

Zidoo X6 Pro is a 64-bit ARM Android TV Boxes based on Rockchip RK3368 processor, promising support for HDMI 2.0 and video decoding up to 4K2K @ 60Hz. While the others I’ve tried so far, such as Beelink i68, are pre-loaded with some version of Kodi 14.2, X6 Pro comes with a modified version of Kodi 15.1. I published pictures of the Zidoo X6 Pro TV box and board a few days ago, and today I’ll review the box’ features, performance, and capabilities. First Boot, Settings and First Impressions I’ve connected a USB hard drive to one of the two USB ports, as well as a USB hub with two RF dongles for Tronsmart Mars G01 gamepad and MeLE F10 Deluxe air mouse, a USB keyboard, and a USB webcam. I’ve also inserted an Ethernet cable, an HDMI cable, an optical audio cable, a Class 10 micro SD card, as […]

October 8, 2015October 8, 2015 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Vigek IOT Core is a Tiny STM32 WiFi Board with a Camera Interface, GPIOs, PWM, and Analog Inputs

Vigek IOT Core packs an STM32 MCU, a Realtek WiFi module, and 8-bit camera interface into a 3.6×3.75 cm board. It also provides GPIO, PWM, and analog input to interface with external hardware such as sensors, and the project had a modest, yet successful, Kickstarter campaign in the summer. Vigek IOT Core specifications: MCU – STMicro STM32F103 ARM Cortex-M3 micro-controller @ up to 72MHz Connectivity – 802.11b/g/n WiFi @ 54Mbps I/Os Up to 8 GPIOs, configurable as up to 4 analog inputs, and up to 6 PWM outputs I/O voltage tolerance – 0~3.6V I/O output current – Up to 8mA Camera – 8-bit camera interface, optional 2.0MP camera with OV2640 sensor Power supply – 3.3V ~ 24V Power Consumption – 32mA in active mode (WIFI connected, camera not working) Dimensions – 36mm x 37.5mm While Vigtek IOT Core can be used without programming, simply using an Android app to control the […]

October 8, 2015October 8, 2015 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

Walabot MIMO Radar Board Can See Through Walls Thanks to Vayyar 3D Imaging Sensors

A few days ago, I wrote about Orbbec Astra 3D camera that can analyze distance and depth to form a 3D image of object. However, this solution uses an IR sensors, and while it can fulfill the needs of many application it does not allow to see through object, and that’s exactly what Walabot wideband MIMO radar board promises to do thanks to Vayyar 3D imaging sensor and a dozen of RF antennas. Some of the key features and preliminary specifications of Walabot board include: Vayyar VYYR2401 3D imaging sensor 12 (or is it 14?) non-contact antennas array system based on “Octopus A3 System on chip” Build in Tx/Rx linear polarized wide-band antennas from 3-10Ghz. On-board Cypress FX3 controller for communication and pre-processing EEPROM (for inventory and calibration information) Walabot interface connectors: Micro-USB 2.0 for high-rate data communication. Option to provide supply from USB. Single supply voltage 4.5-5.5v input for […]

October 8, 2015May 24, 2019 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

FLIF Lossless Image Format Claims to Outperform PNG, JPEG2000, WebP, and BPG

FLIF, which stands for Free Lossless Image Format, is a new lossless image format that is said to provide better compression ration than PNG, lossless JPEG2000, lossless WebP, and lossless BPG for all king of images including medical images, geographical maps, cliparts and so on. Beside being lossless, FLIF is also progressive, so a lower quality version of the image can be displayed early while the download is still in progress. The developer has uploaded a video comparing how a PNG image and FLIF image would load in a slow network. Other FLIF features include: Lossless compression Greyscale, RGB, RGBA Up to 16 bits color depth per channel (high dynamic range) Interlaced (default) or non-interlaced Animation support “Encoding and decoding speeds are not blazingly fast, but they are in the right ballpark” Based on MANIAC (Meta-Adaptive Near-zero Integer Arithmetic Coding) algorithm developed by Jon Sneyers and Pieter Wuille. (However details […]

October 7, 2015October 8, 2015 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

Archos Introduces Free PicoWAN IoT Gateway, Costing 75 Cents Per Year Per Connected Device

The Internet of Things is promising billions of connected devices in the next few years, and while devices at home can usually connect through your broadband connection at no extra cost, devices on the field may need to use cellular connectivity and cheap 2G network are being phased out by Telcos. Weightless, operating over white space frequencies, is one of several solutions proposed to connect IoT objects over longer distances, but Archos has their own project with PicoWAN pico-gateways using LoRa(WAN) protocol which allows for several kilometers range. PicoWAN would plug into your wall socket, connect to your broadband network over WiFI and offer connectivity to various “things” over LoRa. Creating a cellular network is expensive, due to the costs of base stations, but PicoWAN is so cheap, 100 times cheap than traditional base stations, that Archos plans to giveaway 200,000 gateways across Europe to create an IoT network. That […]

October 7, 2015 by Jean-Luc Aufranc (CNXSoft) - 7 Comments

Snickerdoodle Xilinx Zynq ARM + FPGA Board Starts at $55 (Crowdfunding)

While Xilinx Zynq UltraScale+ ARMv8 + FPGA SoC is still in development, there are already quite a few Xilinx Zynq-7000 boards on the market today. The cheapest I know of is MYirTech Z-Turn board selling for $99, but krtkl (pronounced “critical“), US a based startup, will soon bring an even cheaper Zynq-7010/7020 board with their Snickerdoodle board currently listed on CrowdSupply platform for $55 and up, plus shipping. Snickerdoodle board specifications: SoC Xilinx Zynq-7010 dual core Cortex A9 processor @ 667 MHz + FPGA with 430K gates or Xilinx Zynq-7020 dual core Cortex A9 processor @ 866 MHz + FPGA with 1.3million gates (~430K ASIC gates) System Memory – 512MB or 1GB LPDDR2-800 Storage – micro SD card slot, 16MB boot flash Connectivity via Ti Wilink 8 solution 2.4GHz 802.11 b/g/n WiFi + Bluetooth 4.0 or Dual band 802.11 b/g/n WiFi (2×2 MIMO) + Bluetooth 4.0 USB – 1x micro USB port […]

October 7, 2015 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

Xiaomi Mi Smart Remote Center Review

Xiaomi Mi Smart Remote Center is a tiny box with WiFi connectivity and IR transmitters that is used to control infrared enabled devices such as TVs, medai players, air conditioners and more with your Android smartphone. The good thing is that it only costs $20, so I asked GearBest to send a sample to check it out, which they did. I’ll start this review by checking out the hardware, before running MiHome app to control a television and air conditioner. Xiaomi Mi Smart Remote Center Unboxing and Teardown The package is just a cardboard box with Mi logo. Once you open the page there’s a sticker with the QR core redirecting to MiHome app. You can peel it off, and take the box out of the package, where you’ll also find a USB to micro USB cable for power, and a user’s manual in Chinese only. To open the device […]

October 7, 2015October 7, 2015 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

Roku 4 Media Player Supports H.265 and VP9 4K Videos, 7.1 Channel Audio Pass-through

Roku has announced the latest version of their video streaming player. Roku 4 comes with a faster quad core processor, supports H.265 & VP9 video playback up to respectively 2160p60 and 2160p30, and includes a new version of Roku operating systems. Roku 4 specifications: SoC – Unnamed Quad core ARM processor with OpenGL ES 2.0 capable GPU System Memory – 1.5GB RAM Storage – TBD internal storage – micro SD slot Video Output – HDMI 2.0 up to 3840×2160 @ 60Hz with HDCP 2.2 support Audio Output – HDMI or optical S/PDIF with support for Dolby Digital Plus 7.1 surround pass-through Video Codecs – 4K UHD 60 fps HEVC Playback, 4K UHD 30 fps VP9 Playback (YouTube) Connectivity – 802.11ac MIMO dual-band wireless, 10/100 Base-T Ethernet USB – USB host port Power supply – 12V/1A Power consumption – 12.4W (typ.) when streaming 4K UHD video Dimensions – About 16.5 x […]