Posted on

ARNU Box Mach Q Kodi 15 Linux TV Box Specs, Unboxing and Teardown

After having a look at ARNU Box Mach 10 Pure Linux earlier today, I’ll move on to its little brother ARNU Box Mach Q featuring an Amlogic S805 processor with support for H.265 video playback at Full HD. I’ll start by listing the specs, then I’ll take a few pictures, and finally check the board. ARNU Box Mach Q (Pure Linux) specifications Again, the hardware specifications are pretty standard: SoC – Amlogic S805 quad core ARM Cortex A5 @ 1.5GHz with quad core Mali-450MP GPU System Memory – 1 GB DDR3 Storage – 8 GB storage + SD card slot Connectivity – 10/100M Ethernet, 802.11 b/g/n Wi-Fi and Bluetooth Video Output – HDMI 1.4 up to 1080p60, AV output Audio Output – HDMI, AV, optical S/PDIF USB – 2x USB 2.0 ports Misc – IR sensor, Status and Net LEDs Power Supply – 5V/2A Dimensions – 107.5 x 107.5 x […]

Posted on

ARNU Box Mach 10 Pure Linux TV Box Specs, Unboxing, and Teardown

Theater in a Box sent me not one – as expected – but two of their latest “Pure Linux” Kodi media player: ARNU Box Mach 10 powered by Amlogic S812 SoC, and ARNU Box Q based on Amlogic S805 processor. The former has a faster processor, and supports 4K, while the later is cheaper but is limited to 1080p. Today, I’ll have a look at the hardware of both devices, starting with ARNU Box Mach 10, before completing the S812 Linux box review in a few days. ARNU Box Mach 10 Specifications The hardware specifications are pretty similar to what the rest of the market is offering: SoC – Amlogic S812 quad core cortex A9r4 @ 2.0 GHz with octa-core Mali-450MP6 GPU System Memory – 2 GB DDR3 Storage – 16 GB flash, SD card slot Connectivity – 10/100M Ethernet, dual band 802.11 b/g/n Wi-Fi, Bluetooth 4.0 (AP6330 wireless module) […]

ArmSoM RK3588 AIModule7 NVIDIA Jetson Nano-compatible SOM
Posted on

STMicro Introduces $35 STM32 Motor Control Nucleo Pack

STMicroelectronics has recently launched P-NUCLEO-IHM001 motor control starter kit with NUCLEO-F302R8 Cortex M4 MCU board, X-NUCLEO-IHM07M1 driver board for BLDC (Brushless DC) and PMSM (Permanent Magnet Synchronous Motor) electric motors, as well as a Bull Running motor often used in RC helicopters and quadcopters. Technical specifications of the three hardware “blocks” of the kit: X-NUCLEO-IHM07M1 driver board: Three-phase driver board for BLDC/PMSM motors based on L6230 Nominal voltage range from 8 V to 48 V DC 2.8 A output peak current (1.4 A RMS) Non dissipative overcurrent detection and protection Compatible with ST 6-step or ST FOC control algorithm Support for sensorless and sensor mode Hall / encoder motor sensor connector and circuit Configurable jumpers for motor current sensing Potentiometer available for speed regulation ST morpho connectors (found in Nucleo boards) NUCLEO-F302R8 MCU board: STMicro STM32F302R8 Cortex-M4 @ up to 72 MHz with 64KB Flash memory and 16KB SRAM Expansion […]

Posted on

Zidoo 12K Video Player Plays…12K Videos (on 3 Synchronized 4K UHD TV)

Zidoo Android TV boxes have often been featured in this blog, but the company also has products for the industrial market such as their 4K streaming player outputting the same video to up to 8 monitors, and a “12K video player” that outputs a video to three monitors @ 3840×2160 resolution. Zidoo strength is software and support, and they are not a hardware company, and while so far they have partnered with Kaiboer for their Android media players, if the picture above is any indication, they are using Skydigita SDG-3112 player as the hardware platform. The list of specifications and features currently released are unfortunately quite sparse: Video Playback Single 12K video outputted to three 3840×2160 monitors @ 30Hz max, 1080p also supported Codecs – H.265 and H.264 decoding. Containers – TS, MKV, AVI, VOB, MPG, MPEG, MOV. Iimage formats – JPG, JPEG, GIF, PCX, PNG. Video Output – 3x […]

USB123_USBee_AX_Pro
Posted on

Using USB123 USBee AX Pro $5 USB Logic Analyzer with PulseView in Linux

I recently wrote about an ultra low cost USB logic analyzer called USB123 USBee AX Pro, which I bought for $9.58 on DX, but I was later informed it also goes for $5.44 on Aliexpress including free shipping to most countries, and a few dollars extra for shipping to some other countries. Nevertheless, I’ve now received it, and instead of testing it with a closed source (and cracked) Windows software, I installed and ran PulseView open source graphical interface for sigrok, which I previously tested on UNI-T UT61E digital multimeter. The package includes USBee AX PRO mini logic analyzer, 10 dupont wires for 8 channels (digital only) and 2 ground pins, as well as a mini USB to USB cable for connection to a computer. The instructions to use the logic analyzer can be found on Sigrok Wiki. My computer runs Ubuntu 14.04, but Sigrok and PulseView can also be […]

Posted on

How to Use Orange Pi Camera in Linux (with Motion)

Earlier this month, I wrote a Quick Start Guide for Orange Pi Allwinner H3 boards such as Orange Pi PC, and showed how to install and configure Debian on the boards. I’ve also received the $5.90 Orange Pi camera, which when combined an Orange Pi PC, costs around $27 including shipping. So today, I’ve attached the CSI camera to my Orange Pi 2 mini board, and used it with motion to transform for the board into an IP camera. First, you’ll need to insert the camera into CON1 connector with the camera facing the ceiling, and close the black clip to keep it in place. Now connect all cable and power on your board. First, I studied the steps described on that forum thread, and modified Allwinner configuration files, but after one or two hours, I found out some work at been done since May, and it was now much […]

Rockchip RK3568, RK3588 and Intel x86 SBCs and SoMs in 2025
Posted on

Mini Review of Semlamp SL-011 Audio Controlled Relay for Home Lighting

Last month, I wrote about Semlamp SL-012 a smartphone controlled light switch for 2 lamps that sells for about $11 on DX, and contrary to most others don’t use Bluetooth, nor Wifi, but instead a simple microphone. I decided to try it out by purchasing SL-011 model, controlling only one light, for $8.22 on DealExtreme. Semlamp SL-011 Unboxing and Teardown That’s the package with some instructions in Chinese. The device has black and red wires to connect to 220V on the right of the picture below, blue and brown wires to connect to the lamp, and a microphone attached via a white cable. It’s quite easy to take apart, as they are just two screws to remove, and you can easily pop-up the bottom part of the case to access the board. The top of the board features JQC-3FF 24V relay supporting up to 10A @ 277VAC, as well as […]

Posted on

Atmel Unveils the World’s Smallest Bluetooth 4.1 LE SoC, and BTLC1000 Xplained Pro Development Kit

Atmel has just announced it is now shipping SmartConnect BTLC1000 Bluetooth Smart (BLE 4.1) SoC in production quantities. The chip is remarkable thanks to its size, as the company managed to pack an ARM Cortex-M0 MCU, a transceiver, a modem, MAC, PA, TR Switch, and Power Management Unit (PMU) into a 2.26×2.14 mm package. Atmel SmartConnect BTLC1000 Bluetooth LE SoC key features and specifications: MCU – ARM Cortex M0 @ 26 MHz 128KB IRAM/DRAM, 128KB ROM Connectivity – Bluetotoh 4.1 Smart with L2CAP service layer protocols, Security Manager, Attribute protocol (ATT), Generic Attribute Profile (GATT) and the Generic Access Profile (GAP). Proximity, Thermometer, Heart Rate, Blood Pressure, and others profiles are also included in the protocol stack. I/Os – Up to 15, including 2x UART, 2x SPI, and 2x I2C. Hardware Crypto – AES-128, SHA-256 Operating Voltage – 1.8 – 4.3V Power Consumption – > 4mA in RX, and >3mA […]

Boardcon CM3588 Rockchip RK3588 System-on-Module designed for AI and IoT applications