sdk News - Page 25 of 51 - CNX Software

October 8, 2015October 8, 2015 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

Walabot MIMO Radar Board Can See Through Walls Thanks to Vayyar 3D Imaging Sensors

A few days ago, I wrote about Orbbec Astra 3D camera that can analyze distance and depth to form a 3D image of object. However, this solution uses an IR sensors, and while it can fulfill the needs of many application it does not allow to see through object, and that’s exactly what Walabot wideband MIMO radar board promises to do thanks to Vayyar 3D imaging sensor and a dozen of RF antennas. Some of the key features and preliminary specifications of Walabot board include: Vayyar VYYR2401 3D imaging sensor 12 (or is it 14?) non-contact antennas array system based on “Octopus A3 System on chip” Build in Tx/Rx linear polarized wide-band antennas from 3-10Ghz. On-board Cypress FX3 controller for communication and pre-processing EEPROM (for inventory and calibration information) Walabot interface connectors: Micro-USB 2.0 for high-rate data communication. Option to provide supply from USB. Single supply voltage 4.5-5.5v input for […]

October 6, 2015October 7, 2015 by Jean-Luc Aufranc (CNXSoft) - 20 Comments

Roseapple Pi Board Powered by Actions Semi S500 Comes with 2GB RAM

[Update: I’ve finally received an answer: Lemon Pi and RoseapplePi makers are different companies, but they just happen to both use the same Actions Semi S500 reference design, and RoseapplePi is manufactured in Taiwan. The picture above is V1.0 board, but V1.1 will have some modifications] Lemon Pi development board was launched this May via a Indiegogo campaign. The board, based Actions Semi S500 quad core Cortex A9 processor, got fully funded by over 200 backers, but at the time of launch, some people questioned the used of the word “Lemon” in a product name, as it has several pejorative meanings, including “something that is useless or crappy”. I was contacted about a new Roseapple Pi board yesterday, and upon checking out the details, it looks exactly like the Lemon Pi, except it got upgraded to 2GB RAM, just like in Indiegogo… The board name on the PCB also reads […]

October 5, 2015 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

AMS AS7000 Biosensor is Designed for Strapless Optical Heart Rate Monitors

Heart rate monitors (HRM) with chest straps are now being replaced by more comfortable strapless HRM, such as UWatch UX. These products are enabled by photoelectric sensors that sample light modulated by blood vessels, which expand and contract as blood pulses through them. One of such solutions is the recently introduced AMS AS7000 including a Cortex M0 core, and a DSP implementing algorithm to process raw photoplethysmography (PPG) readings from the sensors to convert them into digital HRM and HRV (Heart Rate Variability) values. Highlights of AS7000 Biosensor: MCU – ARM Cortex M0 with 4KB RAM, 32 KB EEPROM I/Os – 9 GPIOs, UART, SPI, I2C Analog electrical and optical Frontends Hardware sequencer Synchronous detector Integrated LEd driver with current control Optical filters Supply Voltage – 2.6 – 3.6V Temperature Range –30 to 70°C Package – 18 pins AS7000 can deliver greater accuracy when it is paired with an external […]

October 4, 2015October 4, 2015 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

Orbbec Persee Android & Ubuntu Mini PC Comes with a 3D Camera and SDK (Crowdfunding)

Orbbec is a startup working on 3D cameras which can be used for gesture recognition, 3D scanning, research purpose, and more. The company has now embedded their Astra 3D sensor into an ARM based mini PC running Android and/or Ubuntu which they call Orbbec Persee. Persee hardware specifications: SoC – Quad core Cortex A17 processor up to 1.8GHz with a Mali-T7xx GPU @ 600 MHz (They did not name it, but it must be Rockchip RK3288) System Memory – 2GB DDR3 Storage – 16GB eMMC flash, 1x micro SD card slot up to 64GB Video & Audio Output – HDMI 2.0 Audio Input – 2x microphones Camera – Built-in Astra Pro 3D camera RGB image size – 1280×720 @ 30 fps (UVC support) Depth image size – 640×480 @ 30 fps (16-bit) Range – 0.4 to 8 meters Depth accuracy – 0.5 centimeters at 2 meters Field of view – […]

September 23, 2015September 24, 2015 by Jean-Luc Aufranc (CNXSoft) - 9 Comments

LeMaker Hikey 96Boards Development Board Comes with 1 to 2GB RAM, Sells for $75 and Up

Hikey was the first 64-bit ARM development board compliant with 96Boards specifications, and supported by Linaro. Availability always seemed to be an issue however, and pricing was set to $129. But Lemaker, the makers of Banana Pi boards, recently joined Linaro, and they’ve built a lower cost version of the Hikey board, still featuring Hisilicon Kirin 620 octa-core ARM Cortex-A53 processor, but with 1GB and 2GB RAM versions, priced respectively at $75 and $99. LeMaker Hikey board specifications: SoC – HiSilicon Kirin 620 octa core Cortex A53 processor @ 1.2 GHz with ARM Mali-450MP4 GPU System Memory – 1 or 2 GB LPDDR3 @ 800 MHz Storage – 8GB eMMC + micro SD slot Video Output / Display – HDMI up to 1080p, MIPI-DSI interface Connectivity – 802.11 a/b/g/n Wi-Fi, Bluetooth 4.1 LE (WL1835MOD module) USB – 2x USB 2.0 host ports, 1x micro USB OTG Camera – MIPI CSI […]

August 26, 2015August 26, 2015 by Jean-Luc Aufranc (CNXSoft) - 72 Comments

Orange Pi PC Allwinner H3 Board Is Now Available for $15

Orange Pi 2 is a board powered by Allwinner H3 quad core processor that sells for $25. Shenzhen Xunlong Software has now launched a lower cost version with Orange Pi PC, still based on Allwinner H3 SoC, but getting ridiculously cheap at $15 + shipping ($3.43 in my case). Orange Pi PC specifications: SoC – Allwinner H3 quad core Cortex A7 @ 1.6 GHz (likely 1.2 GHz instead) with an ARM Mali-400MP2 GPU up to 600 MHz System Memory – 1GB DDR3 Storage – micro SD card slot (up to 64GB) Video Output – HDMI with CEC and HDCP support, AV port Audio I/O – HDMI, AV port, on-board microphone Connectivity – 10/100M Ethernet USB – 3x USB 2.0 host ports, 1x micro USB OTG port Camera – CSI Interface Expansions – 40-pin Raspberry Pi compatible header with 28 GPIOs, UART, I2C, SPI, PWM, CAN, I2S, SPDIF, LRADC, ADC, LINE-IN, […]

August 18, 2015 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Android 6.0 Marshmallow SDK & Final M Preview Released

Google have finally announced Android 6.0 will be Marshmallow, and more importantly released the Android 6.0 SDK (the API won’t change), and the final M Developer Preview. That means developers can already work on and publish apps to the Google Play Store that are compatible with Android 6.0 API level 23. The final Android 6.0 SDK and Android Support Library v23 can be downloaded via the SDK Manager in Android Studio. The new Android Support library includes new libraries such customtabs, percent, recommendation, preference-v7, preference-v14, and preference-leanback-v17, and will help developer integrate new Android Marshallow functionalities to their app in a backward-compatible way. Android 6.0 adds new features like fingerprint scanner support and Doze power saving mode, as well as a new way to handle permissions, but the latest developer preview only brings small changes: Final Permissions User Interface – Updated permissions user interface and permissions behavior. API Change – […]

August 8, 2015 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

Tronsmart Orion R68 RK3368 TV Box Firmware and Android SDK Released

Tronsmart Orion R68 is an Android 5.1 TV box powered by Rockchip RK3368 octa core ARM Cortex A53 processor with 1 or 2GB RAM, and 8 or 16GB eMMC flash depending on model, most probably based on Beelink i68 hardware. The goods news is that the company has now released the stock firmware as well as the Android SDK for the device. The firmware is version 100L1100_0720, dated July 20th, with the following changelog: OTA firmware updates support USB audio support Remote control function via smartphone In case you need to flash the firmware manually, you’ll need a Windows PC, a toothpick and a micro USB cable, and download Updating_instruction&Drivers&Flashing_Tools.zip which contains instructions, and the latest version of two Windows based utilities: DriverAssitant v4.3 – Program used to install the USB drivers for your version of Windows. FactoryTool v1.39 – The tool that does the flashing. If OTA is working, […]