Shuttle showcased a wide range of devices at Computex 2025, including the FTL1 IoT Edge Twin Lake/Amston Lake mini PC/gateway, the XPC Nano NE20N/NE10N Twin Lake/Alder Lake-N mini PCs, the XPC Nano AI Mini PC G1 powered by a Qualcomm Snapdragon X Plus / Elite Arm SoC, and the XPC Fanless DL40N/DL30N with Intel Twin Lake and Alder Lake-N processors, respectively.
Shuttle FTL1 IoT Edge gateway
FTL1 specifications:
- SoC (One or the other)
- Intel Processor N150 Twin Lake SoC with Intel UHD Graphics
- Intel Atom x7211RE Amston Lake SoC with Intel UHD Graphics
- System Memory – DDR5 4800 MT/s, up to 16 GB (note: It should be able to handle up to 64GB DDR5 memory)
- Storage – M.2 SATA or PCIe socket
- Video Output –
- HDMI up to 4096 x 2160 @ 60Hz)
- DisplayPort via USB Type-C
- Networking
- 2.5GbE RJ45 port (Intel controller), optional 2nd LAN port
- Optional WiFi and Bluetooth via M.2 E-Key socket
- USB
- 3x USB 3.2 Gen 1 Type-A port
- 1x USB 3.2 Gen2 Type-C with DP Alt mode
- Expansion
- M.2 2280 M-Key socket (PCIe NVMe / SATA)
- M.2 2230 E-Key socket
- Operating System – Windows 11 64-bit, Linux 64-bit
Shuttle NE20N / NE10N mini PC
XPC Nano NE20N / NE10N specifications:
- SoC
- NE20N – Intel Twin Lake N150 with Intel UHD Graphics
- NE10N – Intel Alder Lake-N N100 or Intel Core i3-N305 with Intel UHD Graphics
- System Memory – DDR4 3200 MT/s, up to 16GB (Note: 32GB should be supported)
- Storage – M.2 SATA/PCIe Gen3 socket
- Video Output
- HDMI up to 3840 x 2160 @ 60Hz
- DisplayPort (4096 x 2160 @ 60Hz
- Dual independent display support
- Networking
- Gigabit Ethernet RJ45 port via Motorcomm controller
- Optional WiFi and Bluetooth via M.2 E-Key socket
- USB –
- 4x USB 3.2 Gen 2 ports
- 2 x USB 2.0 ports
- Expansion Slot
- M.2 2280 M-Key socket
- M.2 2230, E-Key socket
- Operating System – Windows 11 64-bit, Linux
XPC Nano AI Mini PC G1 with Snapdragon X Plus or Elite SoC
AI Mini PC G1 specifications:
- SoC – Qualcomm Snapdragon X Plus or Elite CPU with Qualcomm Adreno GPU
- Memory – 32GB or 64GB LPDDR5 on board memory
- Storage
- 512GB M.2 PCIe Gen4 x4 SSD
- MicroSD card slot
- Video Output – HDMI up to 4096 x 2160 @ 60Hz
- Audio – 3.5mm audio combo hack (Mic/Earphone)
- Networking
- 2.5GbE RJ45 port
- Optional WiFi and Bluetooth via M.2 socket
- USB
- 4x USB 3.1 Gen2 Type-A ports
- 2x USB 4.0 Type-C ports
- Operating System – Windows 11 Home / Windows 11 IoT
XPC Fanless DL40N / DL30N
DL40N/DL30N specifications:
- SoC
- DL40N – Intel Core i3-N350, Intel Processor N250, or Intel Processor N150 (Twin Lake) with Intel UHD graphics
- DL30N – Intel Core i3-N300, Intel Processor N200, or Intel Processor N100 (Alder Lake-N) with Intel UHD graphics
- System Memory – DDR5 4800 MT/s, up to 16GB (again, 64GB DDR5 should be supported too)
- Storage
- 2.5-inch HDD/SSD up to 9.5 mm thick
- M.2 NVMe/SATA 3.0 SSD
- Video Output
- HDMI up to 3840 x 2160 @ 60Hz
- DisplayPort up to 4096 x 2160 @ 60Hz
- VGA up to 1920 x 1080 @ 60Hz
- 3x independent displays supported
- Networking
- 2x 2.5GbE RJ45 ports
- Optional WiFi and Bluetooth via M.2 Key-E socket
- USB – 8x USB 3.2 Gen 1
- Serial – 1x RS232, 1x RS232/422/485 with 5V/12V support
- Expansion
- M.2 2280 M-Key socket
- M.2 2230 E-Key socket
- Operating System – Windows 11 64-bit, Linux
Most of the Shuttle mini PCs showcased at Computex 2025 don’t have a product page yet. The exceptions are the XPC Fanless DL30N and XPC Nano NE10N based on Alder Lake-N processors, which have launched earlier, but it may take a little while before the Shuttle Twin Lake, Qualcomm, and Amstom Lake products above become available.
I can also see an AI Mini PC G1 from Thundercomm, but it looks like a different design. Qualcomm Snapdragon X Plus/Elite mini PCs like the GEEKOM QS1 have been teased in the past, but they never seem to be released. Only time will tell.
Thanks to TLS for the photos.
Jean-Luc started CNX Software in 2010 as a part-time endeavor, before quitting his job as a software engineering manager, and starting to write daily news, and reviews full time later in 2011.
Support CNX Software! Donate via cryptocurrencies, become a Patron on Patreon, or purchase goods on Amazon or Aliexpress. We also use affiliate links in articles to earn commissions if you make a purchase after clicking on those links.
