XIAO ePaper Display Kit
Posted on

XIAO ePaper DIY Kit features ESP32-S3 or nRF52840 SoC, supports 1.54-inch to 7.5-inch displays

Seeed Studio has launched two new ePaper display DIY Kits: the XIAO ePaper DIY Kit-EN04 and XIAO ePaper DIY Kit-EE04, respectively powered by a Nordic Semi nRF52840 or Espressif ESP32-S3 wireless SoC. Both kits support 24-pin and 50-pin ePaper displays, and the company offers 1.54-inch to 7.5-inch displays as options. The XIAO ePaper DIY kits also feature a battery connector with a power switch, a built-in charging IC, and come with one reset and three user buttons. They target low-power ePaper projects such as digital signage, electronic labels, and portable information boards. XIAO ePart DIY kit specifications: Wireless board Kit-EN04 – XIAO nRF52840 Plus Wireless MCU –  Nordic nRF52840 Arm Cortex-M4F microcontroller @ up to 64 MHz with 1 MB flash, 256 KB SRAM, Bluetooth 5.0, NFC, 802.15.4 connectivity Storage – 2 MB onboard Flash Wireless Connectivity – Bluetooth 5.0 (BLE), 802.15.4, and NFC Antenna – Ceramic antenna USB – USB […]

reTerminal E1002 7.3-inch color ePaper display
Posted on

reTerminal E1001/E1002 – ESP32-S3-powered monochrome/color ePaper displays for dashboards, digital signage

Seeed Studio’s reTerminal E1001 and E1002 are two ePaper displays featuring an ESP32-S3 WiFi and Bluetooth LE wireless microcontroller suitable for dashboards or digital signage applications. The only difference between the two reTerminal E-series displays is that the E1001 features a 7.5-inch monochrome display, while the E1002 integrates a 7.3-inch 6-color ePaper display. Both come with a 2,000 mAh battery offering up to 3 months of battery life, a 32MB SPI flash, a microSD card slot, a microphone and a buzzer, temperature and humidity sensors, an 8-pin GPIO header, and a few buttons and LEDs. reTerminal E1001/E1002 specifications: Wireless SoC – Espressif Systems ESP32-S3 dual-core microcontroller with 8MB PSRAM Storage 32MB SPI flash MicroSD card slot up to 32GB (FAT32 file system only) Display E1001 – 7.5-inch Monochrome ePaper display with 800×480 resolution E1002 – 7.3-inch “Full Color” (i.e., 6-color) ePaper display with 800×480 resolution Audio Microphone (3) for voice […]

Advertisement
XIAO 7.5-inch epaper panel
Posted on

Seeed Studio XIAO 7.5″ ePaper panel supports ESPHome firmware, Arduino programming

Seeed Studio XIAO 7.5″ ePaper Panel interfaces an XIAO ESP32-C3 USB-C board and mainly targets the Smart Home market with support for ESPHome, but the monochrome ePaper display is also programmable with the Arduino IDE for a wider range of applications. The display offers a resolution of 800×400 and includes a 2,000mAh battery good for three months per charge with updates every 6 hours. Seeed Studio says the display can operate in the -40°C to 85°C temperature range, so it would be suitable for outdoor use as long as it’s not exposed to rain or dust. The USB-C port of the ESP32-C3 module and the Boot and Reset buttons are easily accessible for charging the display and programming it. XIAO 7.5″ ePaper Panel specifications: Wireless module – XIAO ESP32C3 SoC –  Espressif Systems ESP32-C3 CPU – Single-core RISC-V microcontroller @ 160 MHz Memory/Storage – 400KB SRAM, 384KB ROM, 4MB flash […]

Inky Frame 7.3-inch ePaper display
Posted on

Inky Frame 7.3″ is a 7-color ePaper display powered by a Raspberry Pi Pico 2 W

The Inky Frame 7.3″ is a Pico 2 W ePaper display featuring a 7.3-inch E Ink screen with 800 x 480 resolution and 7-color support. Other features include five LED-equipped buttons, two Qwiic/STEMMA QT connectors, a microSD card slot, and a battery connector with power-saving functionality. This Pico 2 W ePaper display is ideal for low-power applications such as home automation dashboards, sensor data visualization, and static image displays. E Ink technology ensures energy efficiency by consuming power only during screen refreshes while retaining images when unpowered. Flexible mounting options and included metal legs make it suitable for various setups. Previously, we covered the Waveshare 4-inch Spectra, a six-color ePaper display, along with other modules like the Inkycal v3, Inkplate 4, EnkPi, Inkplate 2, and more. Check them out if you’re interested in exploring these products. The Inky Frame 7.3″ specifications: Wireless module – Raspberry Pi Pico 2 W SoC […]

Inkycal v3 is an eco-friendly, customizable e-paper dashboard built with Python 3 and powered by Raspberry Pi Zero W for organizing and displaying information.
Posted on

Inkycal v3 is a Raspberry Pi-Powered ePaper Dashboard for Your Desk

Inkycal v3 is an eco-friendly, customizable E-paper dashboard built with Python 3 and powered by a Raspberry Pi Zero W SBC for organizing and displaying information. Previously, we have covered many E-paper display modules like Inkplate 4, EnkPi, Inkplate 2, and other E-paper display modules. But what makes Inkycal v3 different is its open-source software, a 7.5″ E-paper display with a black frame, and its modular approach to home screen settings. Features of Inkycal v3 E-paper Display: Integrated System – Raspberry Pi Zero W with E-Paper display and custom driver board. Design – Slim 13x18cm frame, black with a black-and-white bezel, and concealed components. Software – Inkycal OS, Python 3-based, supports new SPI displays including 12.48″ models. Modularity – Offers calendar, image, slideshow, RSS feeds, stock tickers, weather, and Todoist modules. User-Friendly – Configurable via a web app, no coding needed. Community Support – Active Discord channel for assistance and […]

Inkplate 4 TEMPERA
Posted on

Inkplate 4 TEMPERA ePaper display supports ESPHome, Arduino, and MicroPython (Crowdfunding)

Years after years, Soldered Electronics keeps on churning out new ESP32-powered ePaper displays and the latest model is the Inkplate 4 TEMPERA with a recycled 3.8-inch e-paper touchscreen with 600×600 resolution and plenty of sensors and features for a device of that size. The InkPlate 4 TEMPERA comes with a frontlight, a gyroscope, an accelerometer, temperature, humidity, air quality, and gesture sensors, Wi-Fi and Bluetooth connectivity, a built-in battery, and a low-power operating mode. Inkplate 4 TEMPERA specifications: Wireless module – ESP32-WROVER-E with ESP32 dual-core microcontroller with Wi-Fi 4 & Bluetooth 4.0 connectivity Memory – 8MB PSRAM Storage – 4MB flash PCB antenna Storage – MicroSD card slot Display (ED038TH2) 3.8-inch 3-bit grayscale (black, white, and six shades of gray) ePaper display with 600 x 600 pixels resolution Refresh rate 0.18s partial refresh rate in 1-bit (B&W) mode 0.86s full refresh mode in either 1-bit or 3-bit modes Multi-point touchscreen […]

Advertisement

EnkPi Raspberry Pi Pico W ePaper Display
Posted on

Add an ePaper display to Raspberry Pi Pico W with EnkPi 2.9-inch to 7.5-inch displays (Crowdfunding)

SB Components is running another crowdfunding campaign with the EnkPi ePaper display powered by a Raspberry Pi Pico W board and offered in four different sizes namely 2.9-inch, 4.2-inch 5.83-inch, and 7.5-inch. Each mainboard also comes with a USB Type-C port, a microSD card socket, an RTC with a backup battery holder, a buzzer, six user buttons, and a JST connector for expansion with GPIO, I2C, UART, and ADC signals. EnkPi specifications: MCU board – Raspberry Pi Pico W with Raspberry Pi RP2040 dual-core Cortex-M0+ microcontroller, 2MB QSPI flash, WiFi 4 module. Storage – MicroSD card socket Display connected over SPI to the Pico W board 2.9-inch tricolor ePaper display with 296×128 resolution 4.2-inch tricolor ePaper display with 400×300 resolution 5.83-inch tricolor ePaper display with 648×480 resolution 7.5-inch tricolor ePaper display with 800×480 resolution Partial refresh support with up to 170 degrees wide viewing angle USB – 1x USB Type-C […]

Inkplate 2 ESP32 color epaper display
Posted on

Inkplate 2 is a 2.13-inch WiFi ePaper display programmable with Arduino or MicroPython (Crowdfunding)

Inkplate 2 wireless ePaper display is by far the smallest display from Soldered Electronics with a 2.13-inch 3-color ePaper display while previous Inkplate models rely on 6-inch to 9.7-inch ePaper displays. The tiny display board integrates an ESP32 dual-core wireless microcontroller that drives the display, provides WiFi and Bluetooth connectivity plus some I/Os, and can be programmed with the Arduino IDE or MicroPython. Inkplate 2 specifications: Wireless module – ESP32-WROVER-E module with ESP32 dual-core microcontroller with Wi-Fi 4 & Bluetooth 4.0 connectivity, 8MB PSRAM, 4MB flash (Note: The product’s description lists 8MB flash, and 4MB RAM, but there’s no ESP32-WROVER-E in this configuration) Antenna- External IPX antenna Display – 2.13-inch ePaper display with 212×104 resolution (111 DPI) Red, black, and white colors 15 seconds full refresh time (no partial update) USB – 1x USB Type-C port for power and programming via CH340 USB to TLL chip Expansion 20-pin header with […]

Boardcon MINI1126B-P AI vision system-on-module wit Rockchip RV1126B-P SoC