Author: Jean-Luc Aufranc (CNXSoft)

Jean-Luc started CNX Software in 2010 as a part-time endeavor, before quitting his job as a software engineering manager, and starting to write daily news, and reviews full time later in 2011.
Posted on by Jean-Luc Aufranc (CNXSoft) - 4 Comments on Thunderboard Wear is a $75 Smartwatch Development Board by Silicon Labs

Thunderboard Wear is a $75 Smartwatch Development Board by Silicon Labs

A few days ago I watched an ARMDevices.net’s video about an ARM’s smartwatch reference design running mbed OS 3.0, powered by a Silicon Labs EFM32 Giant Gecko Cortex M3 MCU, and promising up to 2 months battery life on a 160 mAh battery. While I could not find the full details about the reference design, I noticed Silicon Labs also launched a development board called Thunderboard Wear, based on the same platform, just quite bigger, and still wearable… (Sort of) Thunderboard Wear specifications: MCU – Silicon Labs EFM32GG995F1024 ARM Cortex-M3 MCU up to 48 MHz with 128 kB RAM,1 MB Flash External Memory – 256 kB external SRAM External Storage – micro SD card slot Display – 128×128 pixel Memory LCD from Sharp Connectivity – Bluetooth 4.1 smart module (Silicon Labs BGM111), upgradeable to Bluetooth 4.2 Sensors Ambient Light Sensing (ALS) and Proximity/Gesture via Silicon Labs Si1141. Optical hear-rate monitoring […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 50 Comments on Tronsmart Vega S95 4K Android TV Box Features an External SATA Port

Tronsmart Vega S95 4K Android TV Box Features an External SATA Port

Tronsmart is adding three new devices to the long list of Amlogic S905 TV boxes on the market with: Vega S95 Pro – 1GB RAM, 8GB flash, AP6212 wireless module (2.4GHz WiFi + Bluetooth 4.0) Vega S95 Meta – 2GB RAM, 8GB flash, AP6330 wireless module (Dual band WiFi + Bluetooth 4.0) Vega S95 Telos – 2GB RAM, 16GB flash, AP6335 wireless module (802.11 b/g/n/ac WiFi + Bluetooth 4.0), and SATA All three models also include Gigabit Ethernet. The Pro and Meta models have a lot of competition, but Telos is quite unique so far, as it’s the first to include a SATA port. Tronsmart Vega S95 Telos specifications: SoC –  Amlogic S905 quad core ARM Cortex-A53 @ up to 2.0GHz with penta-core Mali-450MP GPU @ 750 MHz System Memory – 2GB DDR3 Storage – 16GB eMMC 5.0 flash by Samsung + SATA connector + SD card slot Video HDMI […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 6 Comments on ShiftWear Shoes Integrate a Flexible e-Paper Display, Energy Harvesting Capabilities (Crowdfunding)

ShiftWear Shoes Integrate a Flexible e-Paper Display, Energy Harvesting Capabilities (Crowdfunding)

ARM CTO, Mike Muller, showcase imprinted electronics, that is an integrated circuit printed on a plastic film, at ARM TechCon 2015, and several products are featured flexible displays, so in future flexible electronics could bring innovation applications from truly wearables electronics to traceable bank notes, and so on. A company has launched an Indiegogo campaign for a new product, that’s both cool and relatively useless, with ShiftWear sneakers that integrate a flexbile e-Paper display, a battery that recharges by harvesting energy from your steps, and some connectivity (likely Bluetooth LE) to update the display from your iOS, Android or  Windows device. Three models are available: L1, M1 and H1 referring to low height, medium height and high height of the part around the ankle (heel tab?). But all three have basically the same features: Always-on HD color e-paper flexible display Up to 30 days of battery life Waterproof up to […]

Posted on by Jean-Luc Aufranc (CNXSoft) - No Comments on ADLINK CM1-86DX3 Dual Core Vortex86DX3 SBC Complies with PC/104 Standard

ADLINK CM1-86DX3 Dual Core Vortex86DX3 SBC Complies with PC/104 Standard

Adlink has recently introduced a rugged industrial single board computer based on PC/104 standard with anISA bus, and powered by DM&P Vortex86DX3 dual core processor combined with 2GB RAM, SATA and CFast for storage, and Fast & Gigabit Ethernet for networking. Adllink CM1-86DX3 board specifications: SoC – DM&P Vortex86DX3 dual core x86 processor @ 1GHz with 2D GPU, FPU, 32K I-Cache, 32K D-Cache, and 512KB L2 Cache Memory – 2GB DDR3L Storage – SATA, CFast socket. Video Output – VGA; 18/24-bit single-channel TLL/LVDS Connectivity – 1x integrated Fast Ethernet, 1x Gigabit Ethernet (via Intel i210T) USB – 2x USB 2.0 Serial – 2x RS232/422/485,2x RS232, Other I/Os -8x GPIO, 8x A/D Misc – RTC; watchdog; PS/2 port; Smart Embedded Management Agent (SEMA) functions such as a timer, temperature. monitor, fail-safe BIOS, etc… Power Supply – 5V DC (AT mode); Consumption: ~6-7 W Dimensions – 96 x 90mm (PC/104 specifications 2.6 […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 3 Comments on Quick Start Guide for LinkIt Smart 7688 (Duo) Board

Quick Start Guide for LinkIt Smart 7688 (Duo) Board

Mediatek Labs has announced LinkIt Smart 7688 development boards powered by Mediatek MT7688 WiSoC earlier today, but I was selected for a close beta several weeks before the launch, and I’ve had time to play a little with the boards, so today I’ll report my experience getting started with LinkIt Smart 7688 amd 7688 Duo by writing a Quick Start Guide showing how to setup the boards, upgrade firmware, access the serial console, run “Blink LED” sample applications with Python and JavaScript, as well as the Arduino IDE, and connect to the Internet. Initial Setup You’ll only need a micro USB cable and a computer with WiFi and USB ports to get started with the board. The green LED (top) for the MCU will turn on immediately, while the red LED (bottom) for WiFI will blink once, and only turn on continuously after 5 seconds, and within 30 seconds after […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 2 Comments on Mediatek LinkIt Smart 7688 and Smart 7688 DUO Boards Run OpenWRT for IoT Applications

Mediatek LinkIt Smart 7688 and Smart 7688 DUO Boards Run OpenWRT for IoT Applications

MediaTek LinkIt is a collection of development platforms designed for the prototyping of wearables and Internet of Things (IoT) devices, and last year they started with LinkIt ONE board based on Mediatek MT2501 “Aster” micro-controller and featuring WiFi, Bluetooth, GPSD and GSM/GPRS connectivity. Mediatek Labs has now launched two new LinkIt board, namely LinkIt Smart 7688 and LinkIt Smart 7688 DUO, both powered by Mediatek MT7688 MIPS processor and running OpenWRT, with the latter also adding an Atmel ATmega32U4 for Arduino compatibility. LinkIt Smart 7688 Board LinkIt Smart 7688 is then the simpler of the two with the following specifications: Processor – Mediatek MT7688AN MIPS24KEc processor @ 580 MHz with WiFi System Memory – 128MB DDR2 RAM. Storage – 32MB flash + micro SD slot Connectivity – 1T1R Wi-Fi 802.11 b/g/n with chip antenna and I-PEX conector USB – 1x micro USB host port, 1x micro USB port for power […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 14 Comments on UP Board Gets 2GB RAM and 32GB Storage Option, Linux Port in Progress

UP Board Gets 2GB RAM and 32GB Storage Option, Linux Port in Progress

The UP Board is a Raspberry Pi like board with an Intel Atom processor that’s currently on Kickstarter with a few hours left, and it has just reached its 100,000 Euros stretch goal meaning that beside the 16GB storage / 1 GB version, a version with 32Gb storage and 2GB is now offered. The company also showed their progress with the implementation Debian based Ubilinux on the Intel Atom x5-Z8350 board. That means the specifications have now been updated: SoC – Intel Atom x5-Z8350 “Cherry Trail” quad core processor @ 1.44 GHz (Burst frequency: 1.84 GHz) with Intel Gen8 HD graphics @ 500 MHz System Memory –  1 GB or 2 GB DDR3L-1600 Storage – 16 or 32 GB eMMC Video Output / Display – HDMI, DSI connector Audio I/O – HDMI Connectivity – Gigabit Ethernet USB – 4x USB 2.0 host ports, 1x USB 2.0 pin header, 1x micro […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 5 Comments on Bmorn W4301 is a $34 Android Smartphone Powered by Intel Atom x3-C3101 Processor

Bmorn W4301 is a $34 Android Smartphone Powered by Intel Atom x3-C3101 Processor

Intel unveils their plans for Atom X3, X5 and X7 processors last year, but so far we’ve mostly seen devices with Atom X5 processors.  The lowest end Intel Atom processor, namely X3-C2101 “Sofia” dual core processor, with an ARM Mali-400MP GPU and 3G connectivity did find its way into Teclast X70 3G tablet that is now selling for $64 and up retail (but there’s a deal on Geekbuying for $45.99), and a company called Bmorn is about to launch their W4301 smartphone based on Intel/Rockchip X3-C2101 SoC for just $34 ( factory price in quantities), but I think the retail price should be around $60 including shipping. Bmorn W4301 preliminary specifications: SoC – Intel Atom x3-C3130 dual x86 core processor @ up to 1GHz with Mali-400MP2 GPU @ 533 MHz System Memory – 512MB or 1GB LPDDR2 Storage – 4 or 8 GB eMMC Display – 4″ touchscreen with 800×600 resolution […]

Exit mobile version